[PATCH v2] arm64: dts: mt8183: kukui: use generic pin configs for i2c pins

[Hsin-Yi Wang]

On Wed, Jun 30, 2021 at 3:33 PM Hsin-Yi Wang <hsinyi at chromium.org> wrote:
>
> mt8183 i2c pins don't support PUPD register, so change to use generic
> pin configs instead of let it fail and fallback.

Though PUPD can be skipped, if we set bias-pull-up, we may miss the r0
r1 set in mtk_pinconf_adv_pull_set().
Sent another fix to replace this patch here:
https://patchwork.kernel.org/project/linux-mediatek/patch/20210701065439.2527790-1-hsinyi@chromium.org/

>
> Fixes: cd894e274b74 ("arm64: dts: mt8183: Add krane-sku176 board")
> Signed-off-by: Hsin-Yi Wang <hsinyi at chromium.org>
> Reviewed-by: Chen-Yu Tsai <wenst at chromium.org>
> ---
>  arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> index ae549d55a94fc..69dc04c3f7fff 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> @@ -426,7 +426,7 @@ i2c0_pins: i2c0 {
>                 pins_bus {
>                         pinmux = <PINMUX_GPIO82__FUNC_SDA0>,
>                                  <PINMUX_GPIO83__FUNC_SCL0>;
> -                       mediatek,pull-up-adv = <3>;
> +                       bias-pull-up;
>                         mediatek,drive-strength-adv = <00>;
>                 };
>         };
> @@ -435,7 +435,7 @@ i2c1_pins: i2c1 {
>                 pins_bus {
>                         pinmux = <PINMUX_GPIO81__FUNC_SDA1>,
>                                  <PINMUX_GPIO84__FUNC_SCL1>;
> -                       mediatek,pull-up-adv = <3>;
> +                       bias-pull-up;
>                         mediatek,drive-strength-adv = <00>;
>                 };
>         };
> @@ -453,7 +453,7 @@ i2c3_pins: i2c3 {
>                 pins_bus {
>                         pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
>                                  <PINMUX_GPIO51__FUNC_SDA3>;
> -                       mediatek,pull-up-adv = <3>;
> +                       bias-pull-up;
>                         mediatek,drive-strength-adv = <00>;
>                 };
>         };
> @@ -471,7 +471,7 @@ i2c5_pins: i2c5 {
>                 pins_bus {
>                         pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
>                                  <PINMUX_GPIO49__FUNC_SDA5>;
> -                       mediatek,pull-up-adv = <3>;
> +                       bias-pull-up;
>                         mediatek,drive-strength-adv = <00>;
>                 };
>         };
> --
> 2.32.0.93.g670b81a890-goog
>