[PATCH v2 04/22] drm: Don't test for IRQ support in VBLANK ioctls
Liviu Dudau
liviu.dudau at arm.com
Tue Jun 22 08:25:04 PDT 2021
Hello,
On Tue, Jun 22, 2021 at 04:09:44PM +0200, Thomas Zimmermann wrote:
> For KMS drivers, replace the IRQ check in VBLANK ioctls with a check for
> vblank support. IRQs might be enabled wthout vblanking being supported.
>
> This change also removes the DRM framework's only dependency on IRQ state
> for non-legacy drivers. For legacy drivers with userspace modesetting,
> the original test remains in drm_wait_vblank_ioctl().
>
> v2:
> * keep the old test for legacy drivers in
> drm_wait_vblank_ioctl() (Daniel)
>
> Signed-off-by: Thomas Zimmermann <tzimmermann at suse.de>
> ---
> drivers/gpu/drm/drm_irq.c | 10 +++-------
> drivers/gpu/drm/drm_vblank.c | 13 +++++++++----
> 2 files changed, 12 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
> index c3bd664ea733..1d7785721323 100644
> --- a/drivers/gpu/drm/drm_irq.c
> +++ b/drivers/gpu/drm/drm_irq.c
> @@ -74,10 +74,8 @@
> * only supports devices with a single interrupt on the main device stored in
> * &drm_device.dev and set as the device paramter in drm_dev_alloc().
> *
> - * These IRQ helpers are strictly optional. Drivers which roll their own only
> - * need to set &drm_device.irq_enabled to signal the DRM core that vblank
> - * interrupts are working. Since these helpers don't automatically clean up the
> - * requested interrupt like e.g. devm_request_irq() they're not really
> + * These IRQ helpers are strictly optional. Since these helpers don't automatically
> + * clean up the requested interrupt like e.g. devm_request_irq() they're not really
> * recommended.
> */
>
> @@ -91,9 +89,7 @@
> * and after the installation.
> *
> * This is the simplified helper interface provided for drivers with no special
> - * needs. Drivers which need to install interrupt handlers for multiple
> - * interrupts must instead set &drm_device.irq_enabled to signal the DRM core
> - * that vblank interrupts are available.
> + * needs.
> *
> * @irq must match the interrupt number that would be passed to request_irq(),
> * if called directly instead of using this helper function.
> diff --git a/drivers/gpu/drm/drm_vblank.c b/drivers/gpu/drm/drm_vblank.c
> index 3417e1ac7918..a98a4aad5037 100644
> --- a/drivers/gpu/drm/drm_vblank.c
> +++ b/drivers/gpu/drm/drm_vblank.c
> @@ -1748,8 +1748,13 @@ int drm_wait_vblank_ioctl(struct drm_device *dev, void *data,
> unsigned int pipe_index;
> unsigned int flags, pipe, high_pipe;
>
> - if (!dev->irq_enabled)
> - return -EOPNOTSUPP;
> + if (drm_core_check_feature(dev, DRIVER_MODESET)) {
> + if (!drm_dev_has_vblank(dev))
> + return -EOPNOTSUPP;
> + } else {
> + if (!dev->irq_enabled)
> + return -EOPNOTSUPP;
> + }
For a system call that is used quite a lot by userspace we have increased the code size
in a noticeable way. Can we not cache it privately?
Best regards,
Liviu
>
> if (vblwait->request.type & _DRM_VBLANK_SIGNAL)
> return -EINVAL;
> @@ -2023,7 +2028,7 @@ int drm_crtc_get_sequence_ioctl(struct drm_device *dev, void *data,
> if (!drm_core_check_feature(dev, DRIVER_MODESET))
> return -EOPNOTSUPP;
>
> - if (!dev->irq_enabled)
> + if (!drm_dev_has_vblank(dev))
> return -EOPNOTSUPP;
>
> crtc = drm_crtc_find(dev, file_priv, get_seq->crtc_id);
> @@ -2082,7 +2087,7 @@ int drm_crtc_queue_sequence_ioctl(struct drm_device *dev, void *data,
> if (!drm_core_check_feature(dev, DRIVER_MODESET))
> return -EOPNOTSUPP;
>
> - if (!dev->irq_enabled)
> + if (!drm_dev_has_vblank(dev))
> return -EOPNOTSUPP;
>
> crtc = drm_crtc_find(dev, file_priv, queue_seq->crtc_id);
> --
> 2.32.0
>
--
====================
| I would like to |
| fix the world, |
| but they're not |
| giving me the |
\ source code! /
---------------
¯\_(ツ)_/¯
More information about the Linux-mediatek
mailing list