[PATCH 1/3] dt-bindings: phy: mediatek: tphy: add support hardware version 3

[Rob Herring]

On Fri, Jun 04, 2021 at 03:31:18PM +0800, Chunfeng Yun wrote:
> The PHYA architecture is updated, and doesn't support slew rate
> calibration anymore on 7nm or advanced process, add a new version
> number to support it.
> Note: the FreqMeter bank is not used but reserved.
> 
> Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
> ---
>  .../devicetree/bindings/phy/mediatek,tphy.yaml     | 14 +++++++++-----
>  1 file changed, 9 insertions(+), 5 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
> index b8a7651a3d9a..939c09296b5f 100644
> --- a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
> +++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
> @@ -15,7 +15,7 @@ description: |
>    controllers on MediaTek SoCs, includes USB2.0, USB3.0, PCIe and SATA.
>  
>    Layout differences of banks between T-PHY V1 (mt8173/mt2701) and
> -  T-PHY V2 (mt2712) when works on USB mode:
> +  T-PHY V2 (mt2712) / V3 (mt8195) when works on USB mode:
>    -----------------------------------
>    Version 1:
>    port        offset    bank
> @@ -34,7 +34,7 @@ description: |
>    u2 port2    0x1800    U2PHY_COM
>                ...
>  
> -  Version 2:
> +  Version 2/3:
>    port        offset    bank
>    u2 port0    0x0000    MISC
>                0x0100    FMREG
> @@ -59,7 +59,8 @@ description: |
>  
>    SPLLC shared by u3 ports and FMREG shared by u2 ports on V1 are put back
>    into each port; a new bank MISC for u2 ports and CHIP for u3 ports are
> -  added on V2.
> +  added on V2; the FMREG bank for slew rate calibration is not used anymore
> +  and reserved on V3;
>  
>  properties:
>    $nodename:
> @@ -79,8 +80,11 @@ properties:
>                - mediatek,mt2712-tphy
>                - mediatek,mt7629-tphy
>                - mediatek,mt8183-tphy
> -              - mediatek,mt8195-tphy
>            - const: mediatek,generic-tphy-v2

This doesn't look like a good change.

What happens if a DT has the above. It didn't work or didn't support new 
features? Please clarify in the commit the implications of changing 
this. Changing a DT to 'mediatek,generic-tphy-v3' will break existing OS 
if it was looking for v2.

> +      - items:
> +          - enum:
> +              - mediatek,mt8195-tphy
> +          - const: mediatek,generic-tphy-v3
>        - const: mediatek,mt2701-u3phy
>          deprecated: true
>        - const: mediatek,mt2712-u3phy
> @@ -91,7 +95,7 @@ properties:
>      description:
>        Register shared by multiple ports, exclude port's private register.
>        It is needed for T-PHY V1, such as mt2701 and mt8173, but not for
> -      T-PHY V2, such as mt2712.
> +      T-PHY V2/V3, such as mt2712.
>      maxItems: 1
>  
>    "#address-cells":
> -- 
> 2.18.0