[PATCH 9/9] memory: mtk-smi: mt8195: Add initial setting for smi-larb

Yong Wu yong.wu at mediatek.com
Wed Jun 16 04:43:46 PDT 2021


To improve the performance, We add some initial setting for smi larbs.
there are two part:
1), Each port has the special ostd(outstanding) value in each larb.
2), Two general setting for each larb.

In some SoC, this setting maybe changed dynamically for some special case
like 4K, and this initial setting is enough in mt8195.

Signed-off-by: Yong Wu <yong.wu at mediatek.com>
---
 drivers/memory/mtk-smi.c | 74 +++++++++++++++++++++++++++++++++++++++-
 1 file changed, 73 insertions(+), 1 deletion(-)

diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index 08b28e96fd8c..33f497b58f7b 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -32,6 +32,14 @@
 #define SMI_DUMMY			0x444
 
 /* SMI LARB */
+#define SMI_LARB_CMD_THRT_CON		0x24
+#define SMI_LARB_THRT_EN		0x370256
+
+#define SMI_LARB_SW_FLAG		0x40
+#define SMI_LARB_SW_FLAG_1		0x1
+
+#define SMI_LARB_OSTDL_PORT		0x200
+#define SMI_LARB_OSTDL_PORTx(id)	(SMI_LARB_OSTDL_PORT + (((id) & 0x1f) << 2))
 
 /* Below are about mmu enable registers, they are different in SoCs */
 /* mt2701 */
@@ -67,6 +75,11 @@
 })
 
 #define SMI_COMMON_INIT_REGS_NR		6
+#define SMI_LARB_PORT_NR_MAX		32
+
+#define MTK_SMI_FLAG_LARB_THRT_EN	BIT(0)
+#define MTK_SMI_FLAG_LARB_SW_FLAG	BIT(1)
+#define MTK_SMI_CAPS(flags, _x)		(!!((flags) & (_x)))
 
 struct mtk_smi_reg_pair {
 	unsigned int		offset;
@@ -100,6 +113,8 @@ struct mtk_smi_larb_gen {
 	int port_in_larb[MTK_LARB_NR_MAX + 1];
 	void (*config_port)(struct device *dev);
 	unsigned int			larb_direct_to_common_mask;
+	const u8			(*ostd)[SMI_LARB_PORT_NR_MAX];
+	unsigned int			flags_general;
 };
 
 struct mtk_smi {
@@ -187,12 +202,22 @@ static void mtk_smi_larb_config_port_mt8173(struct device *dev)
 static void mtk_smi_larb_config_port_gen2_general(struct device *dev)
 {
 	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
-	u32 reg;
+	u32 reg, flags_general = larb->larb_gen->flags_general;
+	const u8 *larbostd = larb->larb_gen->ostd[larb->larbid];
 	int i;
 
 	if (BIT(larb->larbid) & larb->larb_gen->larb_direct_to_common_mask)
 		return;
 
+	if (MTK_SMI_CAPS(flags_general, MTK_SMI_FLAG_LARB_THRT_EN))
+		writel_relaxed(SMI_LARB_THRT_EN, larb->base + SMI_LARB_CMD_THRT_CON);
+
+	if (MTK_SMI_CAPS(flags_general, MTK_SMI_FLAG_LARB_SW_FLAG))
+		writel_relaxed(SMI_LARB_SW_FLAG_1, larb->base + SMI_LARB_SW_FLAG);
+
+	for (i = 0; i < SMI_LARB_PORT_NR_MAX && larbostd && !!larbostd[i]; i++)
+		writel_relaxed(larbostd[i], larb->base + SMI_LARB_OSTDL_PORTx(i));
+
 	for_each_set_bit(i, (unsigned long *)larb->mmu, 32) {
 		reg = readl_relaxed(larb->base + SMI_LARB_NONSEC_CON(i));
 		reg |= F_MMU_EN;
@@ -263,6 +288,51 @@ static const struct component_ops mtk_smi_larb_component_ops = {
 	.unbind = mtk_smi_larb_unbind,
 };
 
+static const u8 mtk_smi_larb_mt8195_ostd[][SMI_LARB_PORT_NR_MAX] = {
+	[0] = {0x0a, 0xc, 0x22, 0x22, 0x01, 0x0a,}, /* larb0 */
+	[1] = {0x0a, 0xc, 0x22, 0x22, 0x01, 0x0a,}, /* larb1 */
+	[2] = {0x12, 0x12, 0x12, 0x12, 0x0a,},      /* ... */
+	[3] = {0x12, 0x12, 0x12, 0x12, 0x28, 0x28, 0x0a,},
+	[4] = {0x06, 0x01, 0x17, 0x06, 0x0a,},
+	[5] = {0x06, 0x01, 0x17, 0x06, 0x06, 0x01, 0x06, 0x0a,},
+	[6] = {0x06, 0x01, 0x06, 0x0a,},
+	[7] = {0x0c, 0x0c, 0x12,},
+	[8] = {0x0c, 0x0c, 0x12,},
+	[9] = {0x0a, 0x08, 0x04, 0x06, 0x01, 0x01, 0x10, 0x18, 0x11, 0x0a,
+		0x08, 0x04, 0x11, 0x06, 0x02, 0x06, 0x01, 0x11, 0x11, 0x06,},
+	[10] = {0x18, 0x08, 0x01, 0x01, 0x20, 0x12, 0x18, 0x06, 0x05, 0x10,
+		0x08, 0x08, 0x10, 0x08, 0x08, 0x18, 0x0c, 0x09, 0x0b, 0x0d,
+		0x0d, 0x06, 0x10, 0x10,},
+	[11] = {0x0e, 0x0e, 0x0e, 0x0e, 0x0e, 0x0e, 0x01, 0x01, 0x01, 0x01,},
+	[12] = {0x09, 0x09, 0x05, 0x05, 0x0c, 0x18, 0x02, 0x02, 0x04, 0x02,},
+	[13] = {0x02, 0x02, 0x12, 0x12, 0x02, 0x02, 0x02, 0x02, 0x08, 0x01,},
+	[14] = {0x12, 0x12, 0x02, 0x02, 0x02, 0x02, 0x16, 0x01, 0x16, 0x01,
+		0x01, 0x02, 0x02, 0x08, 0x02,},
+	[15] = {}, /* */
+	[16] = {0x28, 0x02, 0x02, 0x12, 0x02, 0x12, 0x10, 0x02, 0x02, 0x0a,
+		0x12, 0x02, 0x0a, 0x16, 0x02, 0x04,},
+	[17] = {0x1a, 0x0e, 0x0a, 0x0a, 0x0c, 0x0e, 0x10,},
+	[18] = {0x12, 0x06, 0x12, 0x06,},
+	[19] = {0x01, 0x04, 0x01, 0x01, 0x01, 0x01, 0x01, 0x04, 0x04, 0x01,
+		0x01, 0x01, 0x04, 0x0a, 0x06, 0x01, 0x01, 0x01, 0x0a, 0x06,
+		0x01, 0x01, 0x05, 0x03, 0x03, 0x04, 0x01,},
+	[20] = {0x01, 0x04, 0x01, 0x01, 0x01, 0x01, 0x01, 0x04, 0x04, 0x01,
+		0x01, 0x01, 0x04, 0x0a, 0x06, 0x01, 0x01, 0x01, 0x0a, 0x06,
+		0x01, 0x01, 0x05, 0x03, 0x03, 0x04, 0x01,},
+	[21] = {0x28, 0x19, 0x0c, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x04,},
+	[22] = {0x28, 0x19, 0x0c, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x04,},
+	[23] = {0x18, 0x01,},
+	[24] = {0x01, 0x01, 0x04, 0x01, 0x01, 0x01, 0x01, 0x01, 0x04, 0x01,
+		0x01, 0x01,},
+	[25] = {0x02, 0x02, 0x02, 0x28, 0x16, 0x02, 0x02, 0x02, 0x12, 0x16,
+		0x02, 0x01,},
+	[26] = {0x02, 0x02, 0x02, 0x28, 0x16, 0x02, 0x02, 0x02, 0x12, 0x16,
+		0x02, 0x01,},
+	[27] = {0x02, 0x02, 0x02, 0x28, 0x16, 0x02, 0x02, 0x02, 0x12, 0x16,
+		0x02, 0x01,},
+	[28] = {0x1a, 0x0e, 0x0a, 0x0a, 0x0c, 0x0e, 0x10,},
+};
+
 static const struct mtk_smi_larb_gen mtk_smi_larb_mt2701 = {
 	.port_in_larb = {
 		LARB0_PORT_OFFSET, LARB1_PORT_OFFSET,
@@ -305,6 +375,8 @@ static const struct mtk_smi_larb_gen mtk_smi_larb_mt8192 = {
 
 static const struct mtk_smi_larb_gen mtk_smi_larb_mt8195 = {
 	.config_port                = mtk_smi_larb_config_port_gen2_general,
+	.ostd		            = mtk_smi_larb_mt8195_ostd,
+	.flags_general	            = MTK_SMI_FLAG_LARB_THRT_EN | MTK_SMI_FLAG_LARB_SW_FLAG,
 };
 
 static const struct of_device_id mtk_smi_larb_of_ids[] = {
-- 
2.18.0


More information about the Linux-mediatek mailing list