[PATCH 22/27] arm64: dts: mt8195: add edp nodes

[Chun-Kuang Hu]

Hi, Tinghan:

Tinghan Shen <tinghan.shen at mediatek.com> 於 2021年6月16日 週三 上午5:35寫道：
>
> From: Jitao Shi <jitao.shi at mediatek.com>
>
> add edp nodes for mt8195
>
> Signed-off-by: Jitao Shi <jitao.shi at mediatek.com>
> ---
>  arch/arm64/boot/dts/mediatek/mt8195.dtsi | 59 +++++++++++++++++++++++-
>  1 file changed, 58 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> index 256818c4c0bf..d7d2c2a8f461 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> @@ -23,6 +23,8 @@
>
>         aliases {
>                 dpi1 = &disp_dpi1;
> +               dp-intf0 = &dp_intf0;
> +               dp-intf1 = &dp_intf1;
>         };
>
>         clocks {
> @@ -1155,6 +1157,29 @@
>                         status = "disabled";
>                 };
>
> +               disp_pwm0: disp_pwm0 at 1100e000 {
> +                       compatible = "mediatek,mt8183-disp-pwm";

You should use

compatible = "mediatek,mt8195-disp-pwm", "mediatek,mt8183-disp-pwm";

and add definition of "mediatek,mt8195-disp-pwm" in binding document.

> +                       reg = <0 0x1100e000 0 0x1000>;
> +                       interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_LOW 0>;
> +                       power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
> +                       #pwm-cells = <2>;
> +                       clocks = <&topckgen CLK_TOP_DISP_PWM0_SEL>,
> +                                       <&infracfg_ao CLK_INFRA_AO_DISP_PWM>;
> +                       clock-names = "main", "mm";
> +                       status = "disabled";
> +               };
> +
> +               disp_pwm1: disp_pwm1 at 1100f000 {
> +                       compatible = "mediatek,mt8183-disp-pwm";

Ditto.

> +                       reg = <0 0x1100f000 0 0x1000>;
> +                       interrupts = <GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH 0>;
> +                       #pwm-cells = <2>;
> +                       clocks = <&topckgen CLK_TOP_DISP_PWM1_SEL>,
> +                               <&infracfg_ao CLK_INFRA_AO_DISP_PWM1>;
> +                       clock-names = "main", "mm";
> +                       status = "disabled";
> +               };
> +
>                 spi1: spi at 11010000 {
>                         compatible = "mediatek,mt8195-spi",
>                                      "mediatek,mt6765-spi";
> @@ -2397,6 +2422,30 @@
>                         status = "disabled";
>                 };
>
> +               dp_intf1: dp_intf1 at 1c113000 {
> +                       compatible = "mediatek,mt8195-dp-intf";

Where is the definition of this compatible?

> +                       reg = <0 0x1c113000 0 0x1000>;
> +                       interrupts = <GIC_SPI 513 IRQ_TYPE_LEVEL_HIGH 0>;
> +                       power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
> +                       clocks = <&vdosys1 CLK_VDO1_DP_INTF0_MM>,
> +                                <&vdosys1 CLK_VDO1_DPINTF>,
> +                                <&topckgen CLK_TOP_DP_SEL>,
> +                                <&topckgen CLK_TOP_TVDPLL2_D2>,
> +                                <&topckgen CLK_TOP_TVDPLL2_D4>,
> +                                <&topckgen CLK_TOP_TVDPLL2_D8>,
> +                                <&topckgen CLK_TOP_TVDPLL2_D16>,
> +                                <&topckgen CLK_TOP_TVDPLL2>;
> +                       clock-names = "hf_fmm_ck",
> +                                     "hf_fdp_ck",
> +                                     "MUX_DP",
> +                                     "TVDPLL_D2",
> +                                     "TVDPLL_D4",
> +                                     "TVDPLL_D8",
> +                                     "TVDPLL_D16",
> +                                     "DPI_CK";
> +                       status = "disabled";
> +               };
> +
>                 hdmi0: hdmi at 1c300000 {
>                         compatible = "mediatek,mt8195-hdmi";
>                         reg = <0 0x1c300000 0 0x1000>;
> @@ -2421,11 +2470,19 @@
>
>                 edp_tx: edp_tx at 1c500000 {
>                         status = "disabled";
> -                       compatible = "mediatek,mt8195-dp_tx";
> +                       compatible = "mediatek,mt8195-edp_tx";
>                         reg = <0 0x1c500000 0 0x8000>;
>                         power-domains = <&spm MT8195_POWER_DOMAIN_EPD_TX>;
>                         interrupts = <GIC_SPI 676 IRQ_TYPE_LEVEL_HIGH 0>;
>                 };
> +
> +               dp_tx: dp_tx at 1c600000 {
> +                       compatible = "mediatek,mt8195-dp_tx";

Ditto.

Regards,
Chun-Kuang.

> +                       reg = <0 0x1c600000 0 0x8000>;
> +                       power-domains = <&spm MT8195_POWER_DOMAIN_DP_TX>;
> +                       interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH 0>;
> +                       status = "disabled";
> +               };
>         };
>
>         hdmiddc0: ddc_i2c {
> --
> 2.18.0
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek