[PATCH v4 2/3] pwm: mtk-disp: move the commit to clock enabled

[Jitao Shi]

On Sun, 2021-06-06 at 23:14 +0200, Uwe Kleine-König wrote:
> On Thu, Jun 03, 2021 at 06:05:30PM +0800, Jitao Shi wrote:
> > Due to the clock sequence changing, so move the reg commit to
> 
> Which change do you refer to, here? The previous patch? If so, I assume
> this means the series is not bisectable because the driver is broken
> when only the first patch is applied?
> 
Yes, this patch is depend the previous patch.
I'll squash it to the previous patch in next version.


> > config().
> > 
> > Signed-off-by: Jitao Shi <jitao.shi at mediatek.com>
> > ---
> >  drivers/pwm/pwm-mtk-disp.c | 20 +++++++-------------
> >  1 file changed, 7 insertions(+), 13 deletions(-)
> > 
> > diff --git a/drivers/pwm/pwm-mtk-disp.c b/drivers/pwm/pwm-mtk-disp.c
> > index b5771e2c54b8..b87b3c00a685 100644
> > --- a/drivers/pwm/pwm-mtk-disp.c
> > +++ b/drivers/pwm/pwm-mtk-disp.c
> > @@ -135,6 +135,13 @@ static int mtk_disp_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
> >  		mtk_disp_pwm_update_bits(mdp, mdp->data->commit,
> >  					 mdp->data->commit_mask,
> >  					 0x0);
> > +	} else {
> 
> You dropped the code comment? Is it wrong? Or is it too obvious to be
> mentioned?
> 

I'll fix them next verison.

> > +		mtk_disp_pwm_update_bits(mdp, mdp->data->bls_debug,
> > +					 mdp->data->bls_debug_mask,
> > +					 mdp->data->bls_debug_mask);
> > +		mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
> > +					 mdp->data->con0_sel,
> > +					 mdp->data->con0_sel);
> >  	}
> >  
> >  	return 0;
> > @@ -208,19 +215,6 @@ static int mtk_disp_pwm_probe(struct platform_device *pdev)
> >  
> >  	platform_set_drvdata(pdev, mdp);
> >  
> > -	/*
> > -	 * For MT2701, disable double buffer before writing register
> > -	 * and select manual mode and use PWM_PERIOD/PWM_HIGH_WIDTH.
> > -	 */
> > -	if (!mdp->data->has_commit) {
> > -		mtk_disp_pwm_update_bits(mdp, mdp->data->bls_debug,
> > -					 mdp->data->bls_debug_mask,
> > -					 mdp->data->bls_debug_mask);
> > -		mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
> > -					 mdp->data->con0_sel,
> > -					 mdp->data->con0_sel);
> > -	}
> > -
> >  	return 0;
> >  }
> 
> Best regards
> Uwe
> 

Best Regards
Jitao