[PATCH 06/23] usb: mtu3: power down port when power down device IP
Chunfeng Yun
chunfeng.yun at mediatek.com
Tue Jun 8 00:57:32 PDT 2021
When power down device IP, we can also power down device port,
then power on the port again when power on device ip, it's helpful
to make device ip enter ip sleep mode.
Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
---
drivers/usb/mtu3/mtu3_core.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c
index e306b93c007d..562f4357831e 100644
--- a/drivers/usb/mtu3/mtu3_core.c
+++ b/drivers/usb/mtu3/mtu3_core.c
@@ -334,6 +334,10 @@ void mtu3_start(struct mtu3 *mtu)
mtu3_readl(mbase, U3D_DEVICE_CONTROL));
mtu3_clrbits(mtu->ippc_base, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN);
+ if (mtu->is_u3_ip)
+ mtu3_clrbits(mtu->ippc_base, SSUSB_U3_CTRL(0), SSUSB_U3_PORT_PDN);
+
+ mtu3_clrbits(mtu->ippc_base, SSUSB_U2_CTRL(0), SSUSB_U2_PORT_PDN);
mtu3_csr_init(mtu);
mtu3_set_speed(mtu, mtu->speed);
@@ -356,6 +360,11 @@ void mtu3_stop(struct mtu3 *mtu)
mtu3_dev_on_off(mtu, 0);
mtu->is_active = 0;
+
+ if (mtu->is_u3_ip)
+ mtu3_setbits(mtu->ippc_base, SSUSB_U3_CTRL(0), SSUSB_U3_PORT_PDN);
+
+ mtu3_setbits(mtu->ippc_base, SSUSB_U2_CTRL(0), SSUSB_U2_PORT_PDN);
mtu3_setbits(mtu->ippc_base, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN);
}
--
2.18.0
More information about the Linux-mediatek
mailing list