[PATCH] soc: mmsys: mediatek: add mask to mmsys routes

CK Hu ck.hu at mediatek.com
Wed Jul 28 20:42:31 PDT 2021


Hi, Hsin-yi:

On Thu, 2021-07-29 at 11:15 +0800, Hsin-Yi Wang wrote:
> On Wed, Jul 28, 2021 at 1:41 AM Frank Wunderlich <linux at fw-web.de> wrote:
> >
> > From: CK Hu <ck.hu at mediatek.com>
> >
> > SOUT has many bits and need to be cleared before set new value.
> > Write only could do the clear, but for MOUT, it clears bits that
> > should not be cleared. So use a mask to reset only the needed bits.
> >
> > this fixes HDMI issues on MT7623/BPI-R2 since 5.13
> >
> > Cc: stable at vger.kernel.org
> > Fixes: 440147639ac7 ("soc: mediatek: mmsys: Use an array for setting the routing registers")
> > Signed-off-by: Frank Wunderlich <frank-w at public-files.de>
> > Signed-off-by: CK Hu <ck.hu at mediatek.com>
> > ---
> > code is taken from here (upstreamed without mask part)
> > https://urldefense.com/v3/__https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/*/2345186/5__;Kw!!CTRNKA9wMg0ARbw!1ebx2FjrHnqvOqw3HdVyMMYcEUivNbxRIOi1_DXMWwfxJHx45NyKI-Dt4Mvo1g$ 
> > basicly CK Hu's code so i set him as author
> > ---
> >  drivers/soc/mediatek/mtk-mmsys.c |   7 +-
> >  drivers/soc/mediatek/mtk-mmsys.h | 133 +++++++++++++++++++++----------
> >  2 files changed, 98 insertions(+), 42 deletions(-)
> >
> > diff --git a/drivers/soc/mediatek/mtk-mmsys.c b/drivers/soc/mediatek/mtk-mmsys.c
> > index 080660ef11bf..0f949896fd06 100644
> > --- a/drivers/soc/mediatek/mtk-mmsys.c
> > +++ b/drivers/soc/mediatek/mtk-mmsys.c
> > @@ -68,7 +68,9 @@ void mtk_mmsys_ddp_connect(struct device *dev,
> >
> >         for (i = 0; i < mmsys->data->num_routes; i++)
> >                 if (cur == routes[i].from_comp && next == routes[i].to_comp) {
> > -                       reg = readl_relaxed(mmsys->regs + routes[i].addr) | routes[i].val;
> > +                       reg = readl_relaxed(mmsys->regs + routes[i].addr);
> > +                       reg &= ~routes[i].mask;
> > +                       reg |= routes[i].val;
> >                         writel_relaxed(reg, mmsys->regs + routes[i].addr);
> >                 }
> >  }
> > @@ -85,7 +87,8 @@ void mtk_mmsys_ddp_disconnect(struct device *dev,
> >
> >         for (i = 0; i < mmsys->data->num_routes; i++)
> >                 if (cur == routes[i].from_comp && next == routes[i].to_comp) {
> > -                       reg = readl_relaxed(mmsys->regs + routes[i].addr) & ~routes[i].val;
> > +                       reg = readl_relaxed(mmsys->regs + routes[i].addr);
> > +                       reg &= ~routes[i].mask;
> 
> This patch is breaking the mt8183 internal display. I think it's
> because  ~routes[i].val; is removed?
> Also what should the routes[i].mask be if it's not set in
> mmsys_mt8183_routing_table?

I'm not sure this problem is about MOUT or SOUT. But for MOUT, it's not
necessary to set mask because the value is equal to mask. To make thins
simple, the code could be

/* For MOUT,  value is equal to mask, so mask is 0 and clear the value
*/
reg &= ~routes[i].mask & ~routes[i].val;

Regards,
CK
> 
> >                         writel_relaxed(reg, mmsys->regs + routes[i].addr);
> >                 }
> >  }
> <snip>



More information about the Linux-mediatek mailing list