[PATCH v1 1/5] dt-bindings: arm: mediatek: mmsys: add mt8195 SoC binding
Enric Balletbo Serra
eballetbo at gmail.com
Wed Jul 28 03:56:44 PDT 2021
Hi Jason,
Missatge de Jason-JH Lin <jason-jh.lin at mediatek.com> del dia dt., 27
de jul. 2021 a les 4:53:
>
> Hi Enric,
>
> On Mon, 2021-07-26 at 12:08 +0200, Enric Balletbo Serra wrote:
> > Hi Jason,
> >
> > Missatge de Jason-JH Lin <jason-jh.lin at mediatek.com> del dia dl., 26
> > de jul. 2021 a les 9:02:
> > >
> > > On Fri, 2021-07-23 at 13:13 +0200, Enric Balletbo Serra wrote:
> > > > Hi Jason,
> > > >
> > > > Thank you for your patch.
> > > >
> > > > Missatge de jason-jh.lin <jason-jh.lin at mediatek.com> del dia dj.,
> > > > 22
> > > > de jul. 2021 a les 11:26:
> > > > >
> > > > > There are 2 display hardware path in mt8195, namely vdosys0 and
> > > > > vdosys1, so add their definition in mtk-mmsys documentation.
> > > > >
> > > >
> > > > Just having 2 display hardware paths is not a reason to have two
> > > > compatibles, isn't the IP block the same? Why do you need to
> > > > introduce
> > > > the two compatibles?
> > > >
> > > > Thanks,
> > > > Enric
> > > >
> > >
> > > Hi Enric,
> > >
> > > Thanks for reviewing my patch.
> > >
> > > The reason for using two compatibles is that vdosys0 and vdosys1
> > > are
> > > different IP blocks.
> > >
> >
> > With that there are different IP blocks, what do you mean? Do you
> > mean
> > that there are two completely different blocks with completely
> > different functionalities?
> >
> > Or that there is the same IP block twice? I mean, of course, the
> > registers are different but has exactly the same functionality.
> >
>
> They are not the same IP block twice.
> Although both vdosys0 and vdosys1 will probe meiatek-drm driver, but
> the components on their hardware path are different and their output
> panel are also different.
>
> > > Because mmsys provides clock control, other display function blocks
> > > may
> > > use them as clock provider.
> > >
> > > E.g.
> > > 1. mmsys with compatible="mediatek,mt8195-vdosys0"
> > > [v4,1/6] arm64: dts: mt8195: add display node for vdosys0
> > >
> > >
> https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/patch/20210723090233.24007-2-jason-jh.lin@mediatek.com/__;!!CTRNKA9wMg0ARbw!xHjKwv34W7ETFcmQPXRViylF2LbV7C7pE8OeJeNvA93jDdzr_ZBRRm8aIUCvAHSD_qGo$
> > >
> > >
> > > ovl0: disp_ovl at 1c000000 {
> > > ...
> > > clocks = <&vdosys0 CLK_VDO0_DISP_OVL0>;
> > > ...
> > > };
> > >
> > > 2. mmsys with compatible="mediatek,mt8195-vdosys1"
> > > [v2,06/14] arm64: dts: mt8195: add display node for vdosys1
> > >
> > >
> https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/patch/20210722094551.15255-7-nancy.lin@mediatek.com/__;!!CTRNKA9wMg0ARbw!xHjKwv34W7ETFcmQPXRViylF2LbV7C7pE8OeJeNvA93jDdzr_ZBRRm8aIUCvAP0FOfkc$
> > >
> > >
> > > vdo1_rdma0: vdo1_rdma at 1c104000 {
> > > ...
> > > clocks = <&vdosys1 CLK_VDO1_MDP_RDMA0>;
> > > ...
> > > };
> > >
> >
> > Note that I am talking without knowing the hardware in detail, but I
> > am wondering why I can't have something like this, where every mmsys
> > is a clock and reset controller provider.
> >
> > vdosys0: syscon at 14000000 {
> > compatible = "mediatek,mt8195-mmsys", "syscon";
> > reg = <0 0x14000000 0 0x1000>;
> > #clock-cells = <1>;
> > #reset-cells = <1>;
> > };
> >
> > vdosys1: syscon at 15000000 {
> > compatible = "mediatek,mt8195-mmsys", "syscon";
> > reg = <0 0x15000000 0 0x1000>;
> > #clock-cells = <1>;
> > #reset-cells = <1>;
> > };
> >
> > ovl0: disp_ovl at 1c000000 {
> > ...
> > clocks = <&vdosys0 CLK_VDO0_DISP_OVL0>;
> > ...
> > };
> >
> > vdo1_rdma0: vdo1_rdma at 1c104000 {
> > ...
> > clocks = <&vdosys1 CLK_VDO1_MDP_RDMA0>;
> > ...
> > };
> >
> > What are the differences between vdosys0 and vdosys1 from a hardware
> > point of view?
> >
> > Cheers,
> > Enric
> >
> > > Regards,
> > > Jason-JH.Lin
> > >
>
> From a hardware point of view, the components and the ouptut panel of
> vdosys0 and vdosys1:
> 1. The components on meiatek-drm of vdosys0 are OVL0, RDMA0, COLOR0,
> CCORR, AAL0, GAMMA, DITHER, DSC0, MERGE0, DP_INTF0 and its output panel
> is eDP.
>
> 2. The components on meiatek-drm of vdosys1 are PSEUDO_OVL, MERGE5,
> DP_INTF1 and its ouptut panel is DP.
>
>
> The resaon for using two compatibales is that we use different driver
> data in mtk-mmsys.c and mtk_drm_drv.c to identify the corresponding
> mmsys is vdosys0 or vdosys1.
>
So IIUC the two mmsys block ares basically the same, they provide the
same, a reset controller, a clock controller and being able to write
to the routing registers, and what you only need to identify is which
one is is vdosys0 and which one is vdosys1 to apply different routing
tables? Can these routing tables change at runtime? Or are they
hardware fixed?
Regards,
Enric
> Their driver data in mtk_drm_drv.c is defined here:
> [v4,4/6] drm/mediatek: add mediatek-drm of vdosys0 support for mt8195
>
> https://patchwork.kernel.org/project/linux-mediatek/patch/20210723090233.24007-5-jason-jh.lin@mediatek.com/
> [v2,14/14] drm/mediatek: add mediatek-drm of vdosys1 support for MT8195
>
> https://patchwork.kernel.org/project/linux-mediatek/patch/20210722094551.15255-15-nancy.lin@mediatek.com/
>
> I think using the same compatible is unable to do this. Or do you have
> other suggestions to do this with the same compatibe?
>
> Regards,
> Jason-JH.Lin
>
> > > > > Signed-off-by: jason-jh.lin <jason-jh.lin at mediatek.com>
> > > > > ---
> > > > > this patch is base on [1][2]
> > > > >
> > > > > [1] dt-bindings: arm: mediatek: mmsys: convert to YAML format
> > > > > -
> > > > >
> https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/patch/20210519161847.3747352-1-fparent@baylibre.com/__;!!CTRNKA9wMg0ARbw!ycgPEK4yBDojiiZJC2E9mGwvxJbaLqhyUxzJIq0ckEP-JVteBcjFdc6ixkNbmknH8f2P$
> > > > >
> > > > > [2] dt-bindings: arm: mediatek: mmsys: add MT8365 SoC binding
> > > > > -
> > > > >
> https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/patch/20210519161847.3747352-2-fparent@baylibre.com/__;!!CTRNKA9wMg0ARbw!ycgPEK4yBDojiiZJC2E9mGwvxJbaLqhyUxzJIq0ckEP-JVteBcjFdc6ixkNbmju2GBrD$
> > > > >
> > > > > ---
> > > > > .../devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
> > > > > |
> > > > > 2 ++
> > > > > 1 file changed, 2 insertions(+)
> > > > >
> > > > > diff --git
> > > > > a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys
> > > > > .yam
> > > > > l
> > > > > b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys
> > > > > .yam
> > > > > l
> > > > > index 2d4ff0ce387b..0789a9614f12 100644
> > > > > ---
> > > > > a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys
> > > > > .yam
> > > > > l
> > > > > +++
> > > > > b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys
> > > > > .yam
> > > > > l
> > > > > @@ -30,6 +30,8 @@ properties:
> > > > > - mediatek,mt8173-mmsys
> > > > > - mediatek,mt8183-mmsys
> > > > > - mediatek,mt8365-mmsys
> > > > > + - mediatek,mt8195-vdosys0
> > > > > + - mediatek,mt8195-vdosys1
> > > > > - const: syscon
> > > > > - items:
> > > > > - const: mediatek,mt7623-mmsys
> > > > > --
> > > > > 2.18.0
> > > > >
> > >
> > > --
> --
> Jason-JH Lin <jason-jh.lin at mediatek.com>
More information about the Linux-mediatek
mailing list