[PATCH] ALSA: usb-audio: fix incorrect clock source setting

Geraldo Nascimento geraldogabriel at gmail.com
Mon Jul 26 13:57:27 PDT 2021


On Mon, Jul 26, 2021 at 8:42 AM chihhao chen <chihhao.chen at mediatek.com> wrote:
>
> Hello,
>
> Attach USB descriptor of clock source and selectior for this earphone.
>
> AC Clock Source Descriptor:
> ------------------------------
>
> Value   Valuename
> 0x08    bLength
> 0x24    bDescriptorType
> 0x0A    bDescriptorSubtype
> 0x09    bClockID
> 0x03    bmAttributes
> 0x07    bmControls
> 0x00    bAssocTerminal
> 0x00    iClockSource
> Hex dump:
> 0x08 0x24 0x0A 0x09 0x03 0x07 0x00 0x00
>
> AC Clock Selector Descriptor:
> ------------------------------
>
> Value   Valuename
> 0x09    bLength
> 0x24    bDescriptorType
> 0x0B    bDescriptorSubtype
> 0x0B    bClockID
> 0x02    bNrInPins
> 0x09    baCSourceID(1)
> 0x0A    baCSourceID(2)
> 0x03    bmControls
> 0x00    iClockSelector
> Hex dump:
> 0x09 0x24 0x0B 0x0B 0x02 0x09 0x0A 0x03 0x00
>
> AC Clock Source Descriptor:
> ------------------------------
>
> Value   Valuename
> 0x08    bLength
> 0x24    bDescriptorType
> 0x0A    bDescriptorSubtype
> 0x0A    bClockID
> 0x03    bmAttributes
> 0x07    bmControls
> 0x00    bAssocTerminal
> 0x00    iClockSource
> Hex dump:
> 0x08 0x24 0x0A 0x0A 0x03 0x07 0x00 0x00
>
> AC Clock Selector Descriptor:
> ------------------------------
>
> Value   Valuename
> 0x09    bLength
> 0x24    bDescriptorType
> 0x0B    bDescriptorSubtype
> 0x0C    bClockID
> 0x02    bNrInPins
> 0x09    baCSourceID(1)
> 0x0A    baCSourceID(2)
> 0x03    bmControls
> 0x00    iClockSelector
> Hex dump:
> 0x09 0x24 0x0B 0x0C 0x02 0x09 0x0A 0x03 0x00
>
> Thanks
> Chihhao

Thank you, Chihhao.

So I was wrong about Samsung USBC Headset (AKG) with VID/PID
(0x04e8/0xa051) having a Clock Multiplier.

There are two Clock Sources, both linked to the USB SOF with fixed sample rate.

Plus two Clock Selectors which are host-programmable and can be set to
either of the two Clock Sources.


I'm still at a loss to explain what is going wrong here.

Would a printk() reveal the first explicit
uac_clock_selector_set_val() on the Clock Selector associated with
USB_IN sets Clock Source ID to pin 1 with Clock Source ID 0x9?

Or is it the other way around, i.e. it sets the Clock Source ID to pin
2 with Clock ID 0xA for the capture stream Clock Selector?


Chihhao Chen, could you please try the following patch for debugging
purposes and share what is printed in dmesg?

Please try one time with your fix applied and one time without, i.e.
with an otherwise unmodified vanilla kernel.

Thank you,
Geraldo Nascimento

--- clock.c.orig    2021-07-17 12:15:06.416028360 -0000
+++ clock.c    2021-07-26 20:45:58.713881962 -0000
@@ -300,6 +300,7 @@ static int __uac_clock_find_source(struc
         /* the entity ID we are looking for is a selector.
          * find out what it currently selects */
         ret = uac_clock_selector_get_val(chip, clock_id);
+        printk(KERN_ERR "FOR EP %x: Clock Selector %x has pin %d for
Clock Source ID %x selected\n", (unsigned int)fmt->endpoint, clock_id,
ret, sources[ret - 1]);
         if (ret < 0) {
             if (!chip->autoclock)
                 return ret;
@@ -324,6 +325,7 @@ static int __uac_clock_find_source(struc
                           sources[ret - 1],
                           visited, validate);
         if (ret > 0) {
+            printk(KERN_ERR "FOR EP %x: Found Source! Clock Selector
%x has pin %d for Clock Source ID %x about to be reselected\n",
(unsigned int)fmt->endpoint, entity_id, cur, sources[cur - 1]);
             err = uac_clock_selector_set_val(chip, entity_id, cur);
             if (err < 0)
                 return err;
@@ -344,6 +346,7 @@ static int __uac_clock_find_source(struc
             if (ret < 0)
                 continue;

+            printk(KERN_ERR "FOR EP %x: Found source by trial and
error! Clock Selector %x has pin %d for Clock Source ID %x about to be
selected\n", (unsigned int)fmt->endpoint, entity_id, i, sources[i -
1]);
             err = uac_clock_selector_set_val(chip, entity_id, i);
             if (err < 0)
                 continue;



More information about the Linux-mediatek mailing list