[PATCH] uart: mediatek: fix memory corruption issue

zhiyong tao zhiyong.tao at mediatek.com
Thu Jul 22 02:04:25 PDT 2021


On Wed, 2021-07-14 at 01:20 +0300, Andy Shevchenko wrote:
> 
> 
> On Saturday, July 10, 2021, Zhiyong Tao <zhiyong.tao at mediatek.com>
> wrote:
> 
> 
> Please, use “serial: 8260_mtk:” prefix.

==> Hi Andy,

Thanks for your suggestion.
we will change it in the next version.
> 
>         This patch is used to fix memory 
>         
> 
> 
> This is completely confusing start of the sentence. The form of “be
> used to” strongly suggests two things: 1) it was a patch to fix
> something; 2) it is not used anymore and never considered to be used
> again,
> 
> 
> Besides that Submitting Patches document highly recommends to avoid
> sentences that starts with “this patch”.
>  

==>We will change the commit message as "Fix uart corruption issue when
rx power off "in the next version.

Thanks.
>         
>         corruption issue when rx power off.
>         1. add spin lock in mtk8250_dma_rx_complete function in APDMA
>         mode.
>         2. add processing mechanism which count value is 0
>         
>         Signed-off-by: Zhiyong Tao <zhiyong.tao at mediatek.com>
>         ---
>          drivers/tty/serial/8250/8250_mtk.c | 15 +++++++++++----
>          1 file changed, 11 insertions(+), 4 deletions(-)
>         
>         diff --git a/drivers/tty/serial/8250/8250_mtk.c
>         b/drivers/tty/serial/8250/8250_mtk.c
>         index f7d3023f860f..09f7d2166315 100644
>         --- a/drivers/tty/serial/8250/8250_mtk.c
>         +++ b/drivers/tty/serial/8250/8250_mtk.c
>         @@ -91,12 +91,15 @@ static void mtk8250_dma_rx_complete(void
>         *param)
>                 struct mtk8250_data *data = up->port.private_data;
>                 struct tty_port *tty_port = &up->port.state->port;
>                 struct dma_tx_state state;
>         -       int copied, total, cnt;
>         +       unsigned int copied, total, cnt;
>                 unsigned char *ptr;
>         +       unsigned long flags;
>         
>                 if (data->rx_status == DMA_RX_SHUTDOWN)
>                         return;
>         
>         +       spin_lock_irqsave(&up->port.lock, flags);
>         +
>                 dmaengine_tx_status(dma->rxchan, dma->rx_cookie,
>         &state);
>                 total = dma->rx_size - state.residue;
>                 cnt = total;
>         @@ -104,9 +107,11 @@ static void mtk8250_dma_rx_complete(void
>         *param)
>                 if ((data->rx_pos + cnt) > dma->rx_size)
>                         cnt = dma->rx_size - data->rx_pos;
>         
>         -       ptr = (unsigned char *)(data->rx_pos + dma->rx_buf);
>         -       copied = tty_insert_flip_string(tty_port, ptr, cnt);
>         -       data->rx_pos += cnt;
>         +       if (cnt != 0) {
>         +               ptr = (unsigned char *)(data->rx_pos +
>         dma->rx_buf);
>         +               copied = tty_insert_flip_string(tty_port, ptr,
>         cnt);
>         +               data->rx_pos += cnt;
>         +       }
>         
>                 if (total > cnt) {
>                         ptr = (unsigned char *)(dma->rx_buf);
>         @@ -120,6 +125,8 @@ static void mtk8250_dma_rx_complete(void
>         *param)
>                 tty_flip_buffer_push(tty_port);
>         
>                 mtk8250_rx_dma(up);
>         +
>         +       spin_unlock_irqrestore(&up->port.lock, flags);
>          }
>         
>          static void mtk8250_rx_dma(struct uart_8250_port *up)
> 
> 


More information about the Linux-mediatek mailing list