[PATCH v2 1/1] Fix cursor plane didn't update
Enric Balletbo Serra
eballetbo at gmail.com
Mon Jul 19 03:27:47 PDT 2021
Hi Jason-jh,
Thank you for your patch. Please prefix this patch with 'drm/mediatek'
so it is clear what the changes are.
Missatge de jason-jh.lin <jason-jh.lin at mediatek.com> del dia dl., 19
de jul. 2021 a les 10:24:
>
> The cursor plane should use the current plane state in atomic_async_update
> because it would not be the new plane state in the global atomic state
> since _swap_state happened when those hook are run.
>
> Fix cursor plane issue by below modification:
> 1. Remove plane_helper_funcs->atomic_update(plane, state) in
> mtk_drm_crtc_async_update.
> 2. Add mtk_drm_update_new_state in to mtk_plane_atomic_async_update to
> update the cursor plane by current plan hook and update the normal
> plane by the new_state.
>
> Fixes: 37418bf14c13 ("drm: Use state helper instead of the plane state pointer")
>
Drop this new line
> Signed-off-by: jason-jh.lin <jason-jh.lin at mediatek.com>
The patch below fixes the cursor issue on my two boards, one based on
mt8173 and the other on mt8183, so
Tested-by: Enric Balletbo i Serra <enric.balletbo at collabora.com>
> ---
> drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 1 -
> drivers/gpu/drm/mediatek/mtk_drm_plane.c | 60 ++++++++++++++----------
> 2 files changed, 34 insertions(+), 27 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> index 474efb844249..063c75bab3a8 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> @@ -538,7 +538,6 @@ void mtk_drm_crtc_async_update(struct drm_crtc *crtc, struct drm_plane *plane,
> if (!mtk_crtc->enabled)
> return;
>
> - plane_helper_funcs->atomic_update(plane, state);
> mtk_drm_crtc_update_config(mtk_crtc, false);
> }
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_plane.c b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
> index b5582dcf564c..e6dcb34d3052 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_plane.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
> @@ -110,6 +110,35 @@ static int mtk_plane_atomic_async_check(struct drm_plane *plane,
> true, true);
> }
>
> +static void mtk_plane_update_new_state(struct drm_plane_state *new_state,
> + struct mtk_plane_state *mtk_plane_state)
> +{
> + struct drm_framebuffer *fb = new_state->fb;
> + struct drm_gem_object *gem;
> + struct mtk_drm_gem_obj *mtk_gem;
> + unsigned int pitch, format;
> + dma_addr_t addr;
> +
> + gem = fb->obj[0];
> + mtk_gem = to_mtk_gem_obj(gem);
> + addr = mtk_gem->dma_addr;
> + pitch = fb->pitches[0];
> + format = fb->format->format;
> +
> + addr += (new_state->src.x1 >> 16) * fb->format->cpp[0];
> + addr += (new_state->src.y1 >> 16) * pitch;
> +
> + mtk_plane_state->pending.enable = true;
> + mtk_plane_state->pending.pitch = pitch;
> + mtk_plane_state->pending.format = format;
> + mtk_plane_state->pending.addr = addr;
> + mtk_plane_state->pending.x = new_state->dst.x1;
> + mtk_plane_state->pending.y = new_state->dst.y1;
> + mtk_plane_state->pending.width = drm_rect_width(&new_state->dst);
> + mtk_plane_state->pending.height = drm_rect_height(&new_state->dst);
> + mtk_plane_state->pending.rotation = new_state->rotation;
> +}
> +
> static void mtk_plane_atomic_async_update(struct drm_plane *plane,
> struct drm_atomic_state *state)
> {
> @@ -126,8 +155,10 @@ static void mtk_plane_atomic_async_update(struct drm_plane *plane,
> plane->state->src_h = new_state->src_h;
> plane->state->src_w = new_state->src_w;
> swap(plane->state->fb, new_state->fb);
> - new_plane_state->pending.async_dirty = true;
>
> + mtk_plane_update_new_state(new_state, new_plane_state);
> + wmb(); /* Make sure the above parameters are set before update */
> + new_plane_state->pending.async_dirty = true;
> mtk_drm_crtc_async_update(new_state->crtc, plane, state);
> }
>
> @@ -189,14 +220,8 @@ static void mtk_plane_atomic_update(struct drm_plane *plane,
> struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state,
> plane);
> struct mtk_plane_state *mtk_plane_state = to_mtk_plane_state(new_state);
> - struct drm_crtc *crtc = new_state->crtc;
> - struct drm_framebuffer *fb = new_state->fb;
> - struct drm_gem_object *gem;
> - struct mtk_drm_gem_obj *mtk_gem;
> - unsigned int pitch, format;
> - dma_addr_t addr;
>
> - if (!crtc || WARN_ON(!fb))
> + if (!new_state->crtc || WARN_ON(!new_state->fb))
> return;
>
> if (!new_state->visible) {
> @@ -204,24 +229,7 @@ static void mtk_plane_atomic_update(struct drm_plane *plane,
> return;
> }
>
> - gem = fb->obj[0];
> - mtk_gem = to_mtk_gem_obj(gem);
> - addr = mtk_gem->dma_addr;
> - pitch = fb->pitches[0];
> - format = fb->format->format;
> -
> - addr += (new_state->src.x1 >> 16) * fb->format->cpp[0];
> - addr += (new_state->src.y1 >> 16) * pitch;
> -
> - mtk_plane_state->pending.enable = true;
> - mtk_plane_state->pending.pitch = pitch;
> - mtk_plane_state->pending.format = format;
> - mtk_plane_state->pending.addr = addr;
> - mtk_plane_state->pending.x = new_state->dst.x1;
> - mtk_plane_state->pending.y = new_state->dst.y1;
> - mtk_plane_state->pending.width = drm_rect_width(&new_state->dst);
> - mtk_plane_state->pending.height = drm_rect_height(&new_state->dst);
> - mtk_plane_state->pending.rotation = new_state->rotation;
> + mtk_plane_update_new_state(new_state, mtk_plane_state);
> wmb(); /* Make sure the above parameters are set before update */
> mtk_plane_state->pending.dirty = true;
> }
> --
> 2.18.0
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek
More information about the Linux-mediatek
mailing list