[PATCH v6 3/3] power: supply: mt6360_charger: add MT6360 charger support

[Randy Dunlap]

Hi--

On 7/16/21 2:43 AM, Gene Chen wrote:
> From: Gene Chen <gene_chen at richtek.com>
> 
> Add basic support for the battery charger for MT6360 PMIC
> 
> Signed-off-by: Gene Chen <gene_chen at richtek.com>
> ---
>  drivers/power/supply/Kconfig          |  11 +
>  drivers/power/supply/Makefile         |   1 +
>  drivers/power/supply/mt6360_charger.c | 867 ++++++++++++++++++++++++++
>  3 files changed, 879 insertions(+)
>  create mode 100644 drivers/power/supply/mt6360_charger.c
> 
> diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
> index 11f5368e810e..81f02f8d4377 100644
> --- a/drivers/power/supply/Kconfig
> +++ b/drivers/power/supply/Kconfig
> @@ -577,6 +577,17 @@ config CHARGER_MP2629
>  	  Battery charger. This driver provides Battery charger power management
>  	  functions on the systems.
>  
> +config CHARGER_MT6360
> +	tristate "Mediatek MT6360 Charger Driver"
> +	depends on MFD_MT6360
> +	depends on REGULATOR
> +	select LINEAR_RANGES
> +	help
> +	  Say Y here to enable MT6360 Charger Part.
> +	  The device supports High-Accuracy Voltage/Current Regulation,
> +	  Average Input Current Regulation, Battery Tempature Sensing,

	                                            Temperature

> +	  Over-Temperature Protection, DPDM Detection for BC1.2
> +
>  config CHARGER_QCOM_SMBB
>  	tristate "Qualcomm Switch-Mode Battery Charger and Boost"
>  	depends on MFD_SPMI_PMIC || COMPILE_TEST


-- 
~Randy
Reported-by: Randy Dunlap <rdunlap at infradead.org>