[PATCH v5 3/8] media: mtk-mdp: don't pm_run_time_get/put for master comp in clock_on
Enric Balletbo i Serra
enric.balletbo at collabora.com
Mon Jul 12 03:12:26 PDT 2021
Hi Eizan,
Thank you for your patch.
On 9/7/21 4:23, Eizan Miyamoto wrote:
> The original intent of commit 86698b9505bbc ("media: mtk-mdp: convert
> mtk_mdp_dev.comp array to list") was to create a list to track all the
> MDP components that needed to have their clocks enabled/disabled when
> calling mtk_mdp_comp_clock_on/off. However, there was a bug inside
> mtk_mdp_register_component where the args to a call to list_add were
> swapped. The result is that only one component was added to
> mtk_mdp_dev.comp_list because comp_list was instead being
> repeatedly added to the single element lists headed by each
> mtk_mdp_comp.
>
> The order of the args to list_add in mtk_mdp_register_component was
> fixed in https://patchwork.kernel.org/patch/11742895/ (Fix Null pointer
> dereference when calling list_add).
>
> Then, as a result of https://patchwork.kernel.org/patch/11530769/
> (mtk-mdp: use pm_runtime in MDP component driver) if all the components
> are added to the component list, the mdp "master" / rdma0 component
> ends up having pm_runtime_get_sync() called on it twice recursively:
>
> rpm_resume+0x694/0x8f8
> __pm_runtime_resume+0x7c/0xa0 ***NOTE***
> mtk_mdp_comp_clock_on+0x48/0x104 [mtk_mdp]
> mtk_mdp_pm_resume+0x2c/0x44 [mtk_mdp]
> pm_generic_runtime_resume+0x34/0x48
> __genpd_runtime_resume+0x6c/0x80
> genpd_runtime_resume+0x104/0x1ac
> __rpm_callback+0x120/0x238
> rpm_callback+0x34/0x8c
> rpm_resume+0x7a0/0x8f8
> __pm_runtime_resume+0x7c/0xa0 ***NOTE***
> mtk_mdp_m2m_start_streaming+0x2c/0x3c [mtk_mdp]
>
> (The calls to pm_runtime_get_sync are inlined and correspond to the
> calls to __pm_runtime_resume). It is not correct to have
> pm_runtime_get_sync called recursively and the second call will block
> indefinitely.
>
> As a result of all that, this change factors mtk_mdp_comp_clock_on/off
> into mtk_mdp_comp_power_on/off and moves the calls to
> pm_runtime_get/put into the power_on/off functions.
>
> This change then special-cases the master/rdma0 MDP component and does
> these things:
> - the master/rdma0 component is not added to mtk_mdp_dev.comp_list
> - the master/rdma0 component has its clocks (*but not power*) toggled
> by mtk_mpd_comp_clock_on/off inside mtk_mdp_clock_on/off.
> - the other components have their clocks *and* power toggled with
> mtk_mdp_comp_power_on/off.
>
> This change introduces the assumption that mtk_mdp_pm_resume will
> always be called though a callback from pm_runtime_get_sync made on the
> master / rdma0 component.
>
> Signed-off-by: Eizan Miyamoto <eizan at chromium.org>
> ---
>
> (no changes since v1)
>
> drivers/media/platform/mtk-mdp/mtk_mdp_comp.c | 28 ++++++++++++++-----
> drivers/media/platform/mtk-mdp/mtk_mdp_comp.h | 3 ++
> drivers/media/platform/mtk-mdp/mtk_mdp_core.c | 23 ++++++++++-----
> 3 files changed, 40 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c
> index 8b6158379f41..ce54863c24ce 100644
> --- a/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c
> +++ b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c
> @@ -53,9 +53,9 @@ static const struct of_device_id mtk_mdp_comp_driver_dt_match[] = {
> };
> MODULE_DEVICE_TABLE(of, mtk_mdp_comp_driver_dt_match);
>
> -void mtk_mdp_comp_clock_on(struct mtk_mdp_comp *comp)
> +void mtk_mdp_comp_power_on(struct mtk_mdp_comp *comp)
> {
> - int i, err;
> + int err;
>
> if (comp->larb_dev) {
> err = mtk_smi_larb_get(comp->larb_dev);
> @@ -66,9 +66,25 @@ void mtk_mdp_comp_clock_on(struct mtk_mdp_comp *comp)
>
> err = pm_runtime_get_sync(comp->dev);
> if (err < 0)
> - dev_err(comp->dev,
> - "failed to runtime get, err %d.\n",
> - err);
> + dev_err(comp->dev, "failed to runtime get, err %d.\n", err);
You can do that change in the previous patch which is the one that introduces
this dev_err call.
> +
> + mtk_mdp_comp_clock_on(comp);
> +}
> +
> +void mtk_mdp_comp_power_off(struct mtk_mdp_comp *comp)
> +{
> + int err;
> +
> + mtk_mdp_comp_clock_off(comp);
> +
> + err = pm_runtime_put_sync(comp->dev);
> + if (err < 0)
> + dev_err(comp->dev, "failed to runtime put, err %d.\n", err);
> +}
> +
> +void mtk_mdp_comp_clock_on(struct mtk_mdp_comp *comp)
> +{
> + int i, err;
>
> for (i = 0; i < ARRAY_SIZE(comp->clk); i++) {
> if (IS_ERR(comp->clk[i]))
> @@ -91,8 +107,6 @@ void mtk_mdp_comp_clock_off(struct mtk_mdp_comp *comp)
>
> if (comp->larb_dev)
> mtk_smi_larb_put(comp->larb_dev);
> -
> - pm_runtime_put_sync(comp->dev);
Ok, now that you are changing these functions I think it will be good to rework
these clock_on and off properly. First returning an error when is needed and
handling it properly on the error path instead of ignoring.
> }
>
> static int mtk_mdp_comp_bind(struct device *dev, struct device *master,
> diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_comp.h b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.h
> index 5e2ee94a1b37..15ef9539a5a7 100644
> --- a/drivers/media/platform/mtk-mdp/mtk_mdp_comp.h
> +++ b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.h
> @@ -23,6 +23,9 @@ struct mtk_mdp_comp {
>
> int mtk_mdp_comp_init(struct mtk_mdp_comp *comp, struct device *dev);
>
> +void mtk_mdp_comp_power_on(struct mtk_mdp_comp *comp);
> +void mtk_mdp_comp_power_off(struct mtk_mdp_comp *comp);
> +
> void mtk_mdp_comp_clock_on(struct mtk_mdp_comp *comp);
> void mtk_mdp_comp_clock_off(struct mtk_mdp_comp *comp);
>
> diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_core.c b/drivers/media/platform/mtk-mdp/mtk_mdp_core.c
> index 78c40a61df1d..3558a6587f51 100644
> --- a/drivers/media/platform/mtk-mdp/mtk_mdp_core.c
> +++ b/drivers/media/platform/mtk-mdp/mtk_mdp_core.c
> @@ -54,8 +54,15 @@ static void mtk_mdp_clock_on(struct mtk_mdp_dev *mdp)
> {
> struct mtk_mdp_comp *comp_node;
>
> + /*
> + * The master / rdma0 component will have pm_runtime_get_sync called
> + * on it through mtk_mdp_m2m_start_streaming, making it unnecessary to
> + * have mtk_mdp_comp_power_on called on it.
> + */
> + mtk_mdp_comp_clock_on(&mdp->comp_self);
> +
> list_for_each_entry(comp_node, &mdp->comp_list, node)
> - mtk_mdp_comp_clock_on(comp_node);
> + mtk_mdp_comp_power_on(comp_node);
> }
>
> static void mtk_mdp_clock_off(struct mtk_mdp_dev *mdp)
> @@ -63,7 +70,14 @@ static void mtk_mdp_clock_off(struct mtk_mdp_dev *mdp)
> struct mtk_mdp_comp *comp_node;
>
> list_for_each_entry(comp_node, &mdp->comp_list, node)
> - mtk_mdp_comp_clock_off(comp_node);
> + mtk_mdp_comp_power_off(comp_node);
> +
> + /*
> + * The master / rdma0 component will have pm_runtime_put called
> + * on it through mtk_mdp_m2m_stop_streaming, making it unnecessary to
> + * have mtk_mdp_comp_power_off called on it.
> + */
> + mtk_mdp_comp_clock_off(&mdp->comp_self);
> }
>
> static void mtk_mdp_wdt_worker(struct work_struct *work)
> @@ -102,8 +116,6 @@ static int mtk_mdp_master_bind(struct device *dev)
> int status;
> struct mtk_mdp_dev *mdp = dev_get_drvdata(dev);
>
> - mtk_mdp_register_component(mdp, &mdp->comp_self);
> -
> status = component_bind_all(dev, mdp);
> if (status) {
> dev_err(dev, "Failed to bind all components: %d\n", status);
> @@ -125,8 +137,6 @@ static int mtk_mdp_master_bind(struct device *dev)
> component_unbind_all(dev, mdp);
>
> err_component_bind_all:
> - mtk_mdp_unregister_component(mdp, &mdp->comp_self);
> -
> return status;
> }
>
> @@ -137,7 +147,6 @@ static void mtk_mdp_master_unbind(struct device *dev)
> pm_runtime_disable(dev);
> mtk_mdp_unregister_m2m_device(mdp);
> component_unbind_all(dev, mdp);
> - mtk_mdp_unregister_component(mdp, &mdp->comp_self);
> }
>
> static const struct component_master_ops mtk_mdp_com_ops = {
>
More information about the Linux-mediatek
mailing list