[PATCH v2 1/9] dt-bindings: mediatek: add definition for mt8195 display

[Chun-Kuang Hu]

Hi, Jason:

jason-jh.lin <jason-jh.lin at mediatek.com> 於 2021年7月10日 週六 下午7:38寫道：
>
> Add definition for mt8195 display.
>
> Signed-off-by: jason-jh.lin <jason-jh.lin at mediatek.com>
> ---
>  .../bindings/display/mediatek/mediatek,disp.txt          | 9 +++++++--
>  1 file changed, 7 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
> index fbb59c9ddda6..de6226d4bca3 100644
> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
> @@ -37,6 +37,7 @@ Required properties (all function blocks):
>         "mediatek,<chip>-disp-aal"              - adaptive ambient light controller
>         "mediatek,<chip>-disp-gamma"            - gamma correction
>         "mediatek,<chip>-disp-merge"            - merge streams from two RDMA sources
> +       "mediatek,<chip>-disp-dsc"              - DSC controller, see mediatek,dsc.yaml

You add dsc binding document in yaml format, so I would like you to
change this binding document to yaml format.

Regards,
Chun-Kuang.

>         "mediatek,<chip>-disp-postmask"         - control round corner for display frame
>         "mediatek,<chip>-disp-split"            - split stream to two encoders
>         "mediatek,<chip>-disp-ufoe"             - data compression engine
> @@ -44,7 +45,7 @@ Required properties (all function blocks):
>         "mediatek,<chip>-dpi"                   - DPI controller, see mediatek,dpi.txt
>         "mediatek,<chip>-disp-mutex"            - display mutex
>         "mediatek,<chip>-disp-od"               - overdrive
> -  the supported chips are mt2701, mt7623, mt2712, mt8167, mt8173, mt8183 and mt8192.
> +  the supported chips are mt2701, mt7623, mt2712, mt8167, mt8173, mt8183, mt8192 and mt8195.
>  - reg: Physical base address and length of the function block register space
>  - interrupts: The interrupt signal from the function block (required, except for
>    merge and split function blocks).
> @@ -60,7 +61,7 @@ Required properties (DMA function blocks):
>         "mediatek,<chip>-disp-ovl"
>         "mediatek,<chip>-disp-rdma"
>         "mediatek,<chip>-disp-wdma"
> -  the supported chips are mt2701, mt8167 and mt8173.
> +  the supported chips are mt2701, mt8167, mt8173 and mt8195.
>  - larb: Should contain a phandle pointing to the local arbiter device as defined
>    in Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
>  - iommus: Should point to the respective IOMMU block with master port as
> @@ -217,3 +218,7 @@ od at 14023000 {
>         power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
>         clocks = <&mmsys CLK_MM_DISP_OD>;
>  };
> +
> +dsc0: disp_dsc_wrap at 1c009000 {
> +       /* See mediatek,dsc.yaml for details */
> +};
> --
> 2.18.0
>