[PATCH v3 2/2] power: supply: mt6360_charger: add MT6360 charger support
Gene Chen
gene.chen.richtek at gmail.com
Mon Jan 11 07:15:33 EST 2021
Sebastian Reichel <sebastian.reichel at collabora.com> 於 2021年1月7日 週四 上午4:16寫道：
>
> Hi Gene,
>
> I have a bunch of comments, please take a look at my inline
> comments.
>
> On Thu, Dec 24, 2020 at 03:48:04PM +0800, Gene Chen wrote:
> > From: Gene Chen <gene_chen at richtek.com>
> >
> > Add basic support for the battery charger for MT6360 PMIC
> >
> > Signed-off-by: Gene Chen <gene_chen at richtek.com>
> > ---
> > drivers/power/supply/Kconfig | 10 +
> > drivers/power/supply/Makefile | 1 +
> > drivers/power/supply/mt6360_charger.c | 1054 +++++++++++++++++++++++++++++++++
> > 3 files changed, 1065 insertions(+)
> > create mode 100644 drivers/power/supply/mt6360_charger.c
> >
> > diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
> > index eec646c..dd63bed 100644
> > --- a/drivers/power/supply/Kconfig
> > +++ b/drivers/power/supply/Kconfig
> > @@ -567,6 +567,16 @@ config CHARGER_MP2629
> > Battery charger. This driver provides Battery charger power management
> > functions on the systems.
> >
> > +config CHARGER_MT6360
> > + tristate "Mediatek MT6360 Charger Driver"
> > + depends on MFD_MT6360
> > + depends on REGULATOR
> > + help
> > + Say Y here to enable MT6360 Charger Part.
> > + The device supports High-Accuracy Voltage/Current Regulation,
> > + Average Input Current Regulation, Battery Tempature Sensing,
> > + Over-Temperature Protection, DPDM Detection for BC1.2
> > +
> > config CHARGER_QCOM_SMBB
> > tristate "Qualcomm Switch-Mode Battery Charger and Boost"
> > depends on MFD_SPMI_PMIC || COMPILE_TEST
> > diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
> > index dd4b863..9bd0804 100644
> > --- a/drivers/power/supply/Makefile
> > +++ b/drivers/power/supply/Makefile
> > @@ -77,6 +77,7 @@ obj-$(CONFIG_CHARGER_MAX77693) += max77693_charger.o
> > obj-$(CONFIG_CHARGER_MAX8997) += max8997_charger.o
> > obj-$(CONFIG_CHARGER_MAX8998) += max8998_charger.o
> > obj-$(CONFIG_CHARGER_MP2629) += mp2629_charger.o
> > +obj-$(CONFIG_CHARGER_MT6360) += mt6360_charger.o
> > obj-$(CONFIG_CHARGER_QCOM_SMBB) += qcom_smbb.o
> > obj-$(CONFIG_CHARGER_BQ2415X) += bq2415x_charger.o
> > obj-$(CONFIG_CHARGER_BQ24190) += bq24190_charger.o
> > diff --git a/drivers/power/supply/mt6360_charger.c b/drivers/power/supply/mt6360_charger.c
> > new file mode 100644
> > index 0000000..f1dcb97
> > --- /dev/null
> > +++ b/drivers/power/supply/mt6360_charger.c
> > @@ -0,0 +1,1054 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (c) 2019 MediaTek Inc.
>
> 2019-2021? :)
>
ACK
> > + */
> > +
> > +#include <linux/init.h>
> > +#include <linux/module.h>
> > +#include <linux/kernel.h>
> > +#include <linux/regmap.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/of.h>
>
> change of.h to <linux/property.h> after implementing my later
> change request.
>
ACK
> > +#include <linux/interrupt.h>
> > +#include <linux/power_supply.h>
> > +#include <linux/regulator/driver.h>
> > +
> > +#define MT6360_PMU_CHG_CTRL1 0x311
> > +#define MT6360_PMU_CHG_CTRL2 0x312
> > +#define MT6360_PMU_CHG_CTRL3 0x313
> > +#define MT6360_PMU_CHG_CTRL4 0x314
> > +#define MT6360_PMU_CHG_CTRL5 0x315
> > +#define MT6360_PMU_CHG_CTRL6 0x316
> > +#define MT6360_PMU_CHG_CTRL7 0x317
> > +#define MT6360_PMU_CHG_CTRL8 0x318
> > +#define MT6360_PMU_CHG_CTRL9 0x319
> > +#define MT6360_PMU_CHG_CTRL10 0x31A
> > +#define MT6360_PMU_CHG_CTRL11 0x31B
> > +#define MT6360_PMU_CHG_CTRL12 0x31C
> > +#define MT6360_PMU_CHG_CTRL13 0x31D
> > +#define MT6360_PMU_DEVICE_TYPE 0x322
> > +#define MT6360_PMU_USB_STATUS1 0x327
> > +#define MT6360_PMU_CHG_CTRL17 0x32B
> > +#define MT6360_PMU_CHG_CTRL18 0x32C
> > +#define MT6360_PMU_CHG_STAT 0x34A
> > +#define MT6360_PMU_CHG_CTRL19 0x361
> > +#define MT6360_PMU_FOD_STAT 0x3E7
> > +
> > +/* MT6360_PMU_CHG_CTRL1 */
> > +#define MT6360_FSLP_SHFT (3)
> > +#define MT6360_FSLP_MASK BIT(MT6360_FSLP_SHFT)
> > +#define MT6360_HIZ_SHFT (2)
> > +#define MT6360_HIZ_MASK BIT(MT6360_HIZ_SHFT)
> > +#define MT6360_OPA_MODE_SHFT (0)
> > +#define MT6360_OPA_MODE_MASK BIT(MT6360_OPA_MODE_SHFT)
> > +/* MT6360_PMU_CHG_CTRL2 */
> > +#define MT6360_TE_SHFT (4)
> > +#define MT6360_TE_MASK BIT(MT6360_TE_SHFT)
> > +#define MT6360_IINLMTSEL_SHFT (2)
> > +#define MT6360_IINLMTSEL_MASK GENMASK(3, 2)
> > +#define MT6360_CHG_EN_SHFT (0)
> > +#define MT6360_CHG_EN_MASK BIT(MT6360_CHG_EN_SHFT)
> > +/* MT6360_PMU_CHG_CTRL3 */
> > +#define MT6360_IAICR_SHFT (2)
> > +#define MT6360_IAICR_MASK GENMASK(7, 2)
> > +#define MT6360_ILIM_EN_MASK BIT(0)
> > +/* MT6360_PMU_CHG_CTRL4 */
> > +#define MT6360_VOREG_SHFT (1)
> > +#define MT6360_VOREG_MASK GENMASK(7, 1)
> > +/* MT6360_PMU_CHG_CTRL5 */
> > +#define MT6360_VOBST_MASK GENMASK(7, 2)
> > +/* MT6360_PMU_CHG_CTRL6 */
> > +#define MT6360_VMIVR_SHFT (1)
> > +#define MT6360_VMIVR_MASK GENMASK(7, 1)
> > +/* MT6360_PMU_CHG_CTRL7 */
> > +#define MT6360_ICHG_SHFT (2)
> > +#define MT6360_ICHG_MASK GENMASK(7, 2)
> > +/* MT6360_PMU_CHG_CTRL8 */
> > +#define MT6360_IPREC_SHFT (0)
> > +#define MT6360_IPREC_MASK GENMASK(3, 0)
> > +/* MT6360_PMU_CHG_CTRL9 */
> > +#define MT6360_IEOC_SHFT (4)
> > +#define MT6360_IEOC_MASK GENMASK(7, 4)
> > +/* MT6360_PMU_CHG_CTRL10 */
> > +#define MT6360_LBP_SHFT (4)
> > +#define MT6360_LBP_MASK GENMASK(7, 4)
> > +#define MT6360_OTG_OC_SHFT (0)
> > +#define MT6360_OTG_OC_MASK GENMASK(3, 0)
> > +/* MT6360_PMU_CHG_CTRL11 */
> > +#define MT6360_SYSREG_SHFT (2)
> > +#define MT6360_SYSREG_MASK GENMASK(4, 2)
> > +#define MT6360_VREC_SHFT (0)
> > +#define MT6360_VREC_MASK GENMASK(2, 0)
> > +/* MT6360_PMU_CHG_CTRL12 */
> > +#define MT6360_WT_FC_SHFT (5)
> > +#define MT6360_WT_FC_MASK GENMASK(7, 5)
> > +/* MT6360_PMU_CHG_CTRL13 */
> > +#define MT6360_CHG_WDT_EN_SHFT (7)
> > +#define MT6360_CHG_WDT_EN_MASK BIT(MT6360_CHG_WDT_EN_SHFT)
> > +#define MT6360_CHG_WDT_SHFT (4)
> > +#define MT6360_CHG_WDT_MASK GENMASK(5, 4)
> > +/* MT6360_PMU_DEVICE_TYPE */
> > +#define MT6360_USBCHGEN_SHFT (7)
> > +#define MT6360_USBCHGEN_MASK BIT(MT6360_USBCHGEN_SHFT)
> > +/* MT6360_PMU_USB_STATUS1 */
> > +#define MT6360_USB_STATUS_SHFT (4)
> > +#define MT6360_USB_STATUS_MASK GENMASK(6, 4)
> > +/* MT6360_PMU_CHG_CTRL18 */
> > +#define MT6360_BAT_COMP_SHFT (3)
> > +#define MT6360_BAT_COMP_MASK GENMASK(5, 3)
> > +#define MT6360_VCLAMP_SHFT (0)
> > +#define MT6360_VCLAMP_MASK GENMASK(2, 0)
> > +/* MT6360_PMU_CHG_STAT */
> > +#define MT6360_CHG_STAT_SHFT (6)
> > +#define MT6360_CHG_STAT_MASK GENMASK(7, 6)
> > +#define MT6360_VBAT_LVL_MASK BIT(5)
> > +/* MT6360_PMU_CHG_CTRL19 */
> > +#define MT6360_VINOVP_SHFT (5)
> > +#define MT6360_VINOVP_MASK GENMASK(6, 5)
> > +/* MT6360_PMU_FOD_STAT */
> > +#define MT6360_CHRDET_EXT_SHFT (4)
> > +#define MT6360_CHRDET_EXT_MASK BIT(4)
> > +
> > +/* uA */
> > +#define MT6360_ICHG_MIN 100000
> > +#define MT6360_ICHG_MAX 5000000
> > +#define MT6360_ICHG_STEP 100000
> > +/* uV */
> > +#define MT6360_VOREG_MIN 3900000
> > +#define MT6360_VOREG_MAX 4710000
> > +#define MT6360_VOREG_STEP 10000
> > +/* uA */
> > +#define MT6360_AICR_MIN 100000
> > +#define MT6360_AICR_MAX 3250000
> > +#define MT6360_AICR_STEP 50000
> > +/* uA */
> > +#define MT6360_IPREC_MIN 100000
> > +#define MT6360_IPREC_MAX 850000
> > +#define MT6360_IPREC_STEP 50000
> > +/* uA */
> > +#define MT6360_IEOC_MIN 100000
> > +#define MT6360_IEOC_MAX 850000
> > +#define MT6360_IEOC_STEP 50000
> > +
> > +struct mt6360_chg_platform_data {
> > + u32 vinovp;
> > +};
>
> I think it's pointless to have the platform_data struct.
> More about that later.
>
ACK, I will fix it as below suggestion.
> > +struct mt6360_chg_info {
> > + struct device *dev;
> > + struct mt6360_chg_platform_data *pdata;
> > + struct regmap *regmap;
> > + struct power_supply_desc psy_desc;
> > + struct power_supply *psy;
> > + struct regulator_dev *otg_rdev;
> > + struct mutex chgdet_lock;
> > + bool pwr_rdy;
> > + bool bc12_en;
> > + int psy_usb_type;
> > + struct work_struct chrdet_work;
> > +};
> > +
> > +static struct mt6360_chg_platform_data def_platform_data = {
> > + .vinovp = 6500000,
> > +};
> > +
> > +enum mt6360_iinlmtsel {
> > + MT6360_IINLMTSEL_AICR_3250 = 0,
> > + MT6360_IINLMTSEL_CHG_TYPE,
> > + MT6360_IINLMTSEL_AICR,
> > + MT6360_IINLMTSEL_LOWER_LEVEL,
> > +};
> > +
> > +enum mt6360_pmu_chg_type {
> > + MT6360_CHG_TYPE_NOVBUS = 0,
> > + MT6360_CHG_TYPE_UNDER_GOING,
> > + MT6360_CHG_TYPE_SDP,
> > + MT6360_CHG_TYPE_SDPNSTD,
> > + MT6360_CHG_TYPE_DCP,
> > + MT6360_CHG_TYPE_CDP,
> > + MT6360_CHG_TYPE_MAX,
> > +};
> > +
> > +static enum power_supply_usb_type mt6360_charger_usb_types[] = {
> > + POWER_SUPPLY_USB_TYPE_UNKNOWN,
> > + POWER_SUPPLY_USB_TYPE_SDP,
> > + POWER_SUPPLY_USB_TYPE_DCP,
> > + POWER_SUPPLY_USB_TYPE_CDP,
> > + POWER_SUPPLY_USB_TYPE_C,
> > + POWER_SUPPLY_USB_TYPE_PD,
> > + POWER_SUPPLY_USB_TYPE_PD_DRP,
> > + POWER_SUPPLY_USB_TYPE_APPLE_BRICK_ID
>
> driver/hardware does not seem to support Type-C, PD, PD-DRP and the
> special Apple type. Any unsupported type should not be listed.
>
ACK
> > +};
> > +
> > +static unsigned int mt6360_map_reg_sel(u32 data, u32 min, u32 max, u32 step)
> > +{
> > + u32 target = 0, max_sel;
> > +
> > + if (data >= min) {
> > + target = (data - min) / step;
> > + max_sel = (max - min) / step;
> > + if (target > max_sel)
> > + target = max_sel;
> > + }
> > + return target;
> > +}
> > +
> > +static u32 mt6360_map_real_val(u32 sel, u32 min, u32 max, u32 step)
> > +{
> > + u32 target = 0;
> > +
> > + target = min + (sel * step);
> > + if (target > max)
> > + target = max;
> > + return target;
> > +}
> > +
> > +static int mt6360_get_chrdet_ext_stat(struct mt6360_chg_info *mci,
> > + bool *pwr_rdy)
> > +{
> > + int ret;
> > + unsigned int regval;
> > +
> > + ret = regmap_read(mci->regmap, MT6360_PMU_FOD_STAT, ®val);
> > + if (ret < 0)
> > + return ret;
> > + *pwr_rdy = (regval & MT6360_CHRDET_EXT_MASK) ? true : false;
> > + return 0;
> > +}
> > +
> > +static int mt6360_charger_get_online(struct mt6360_chg_info *mci,
> > + union power_supply_propval *val)
> > +{
> > + int ret;
> > + bool pwr_rdy;
> > +
> > + ret = mt6360_get_chrdet_ext_stat(mci, &pwr_rdy);
> > + if (ret < 0)
> > + return ret;
> > + val->intval = pwr_rdy ? true : false;
> > + return 0;
> > +}
> > +
> > +static int mt6360_charger_get_status(struct mt6360_chg_info *mci,
> > + union power_supply_propval *val)
> > +{
> > + int status, ret;
> > + unsigned int regval;
> > + bool pwr_rdy;
> > +
> > + ret = mt6360_get_chrdet_ext_stat(mci, &pwr_rdy);
> > + if (ret < 0)
> > + return ret;
> > + if (!pwr_rdy) {
> > + status = POWER_SUPPLY_STATUS_DISCHARGING;
> > + goto out;
> > + }
> > +
> > + ret = regmap_read(mci->regmap, MT6360_PMU_CHG_STAT, ®val);
> > + if (ret < 0)
> > + return ret;
> > + regval &= MT6360_CHG_STAT_MASK;
> > + regval >>= MT6360_CHG_STAT_SHFT;
> > + switch (regval) {
> > + case 0x0:
> > + status = POWER_SUPPLY_STATUS_NOT_CHARGING;
> > + break;
> > + case 0x1:
> > + status = POWER_SUPPLY_STATUS_CHARGING;
> > + break;
> > + case 0x2:
> > + status = POWER_SUPPLY_STATUS_FULL;
> > + break;
> > + default:
> > + ret = -EIO;
> > + }
> > +out:
> > + if (!ret)
> > + val->intval = status;
> > + return ret;
> > +}
> > +
> > +static int mt6360_charger_get_charge_type(struct mt6360_chg_info *mci,
> > + union power_supply_propval *val)
> > +{
> > + int type, ret;
> > + unsigned int regval;
> > + u8 chg_stat;
> > +
> > + ret = regmap_read(mci->regmap, MT6360_PMU_CHG_STAT, ®val);
> > + if (ret < 0)
> > + return ret;
> > +
> > + chg_stat = (regval & MT6360_CHG_STAT_MASK) >> MT6360_CHG_STAT_SHFT;
> > + switch (chg_stat) {
> > + case 0x01: /* Charge in Progress */
> > + if (regval & MT6360_VBAT_LVL_MASK)
> > + type = POWER_SUPPLY_CHARGE_TYPE_FAST;
> > + else
> > + type = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
> > + break;
> > + case 0x00: /* Not Charging */
> > + case 0x02: /* Charge Done */
> > + case 0x03: /* Charge Fault */
> > + default:
> > + type = POWER_SUPPLY_CHARGE_TYPE_NONE;
> > + break;
> > + }
> > +
> > + val->intval = type;
> > + return 0;
> > +}
> > +
> > +static int mt6360_charger_get_ichg(struct mt6360_chg_info *mci,
> > + union power_supply_propval *val)
> > +{
> > + int ret;
> > + unsigned int regval;
> > +
> > + ret = regmap_read(mci->regmap, MT6360_PMU_CHG_CTRL7, ®val);
> > + if (ret < 0)
> > + return ret;
> > + regval = (regval & MT6360_ICHG_MASK) >> MT6360_ICHG_SHFT;
> > + val->intval = mt6360_map_real_val(regval,
> > + MT6360_ICHG_MIN,
> > + MT6360_ICHG_MAX,
> > + MT6360_ICHG_STEP);
> > + return 0;
> > +}
>
> It's unusual, that you do not need any scaling. Does the hardware
> really report voltages in µV and currents in µA?
>
Should I replace MT6360_ICHG_MIN by MT6360_ICHG_MINUA?
> > +static int mt6360_charger_get_max_ichg(struct mt6360_chg_info *mci,
> > + union power_supply_propval *val)
> > +{
> > + val->intval = MT6360_ICHG_MAX;
> > + return 0;
> > +}
> > +
> > +static int mt6360_charger_get_cv(struct mt6360_chg_info *mci,
> > + union power_supply_propval *val)
> > +{
> > + int ret;
> > + unsigned int regval;
> > +
> > + ret = regmap_read(mci->regmap, MT6360_PMU_CHG_CTRL4, ®val);
> > + if (ret < 0)
> > + return ret;
> > + regval = (regval & MT6360_VOREG_MASK) >> MT6360_VOREG_SHFT;
> > + val->intval = mt6360_map_real_val(regval,
> > + MT6360_VOREG_MIN,
> > + MT6360_VOREG_MAX,
> > + MT6360_VOREG_STEP);
> > + return 0;
> > +}
> > +
> > +static int mt6360_charger_get_max_cv(struct mt6360_chg_info *mci,
> > + union power_supply_propval *val)
> > +{
> > + val->intval = MT6360_VOREG_MAX;
> > + return 0;
> > +}
> > +
> > +static int mt6360_charger_get_aicr(struct mt6360_chg_info *mci,
> > + union power_supply_propval *val)
> > +{
> > + int ret;
> > + unsigned int regval;
> > +
> > + ret = regmap_read(mci->regmap, MT6360_PMU_CHG_CTRL3, ®val);
> > + if (ret < 0)
> > + return ret;
> > + regval = (regval & MT6360_IAICR_MASK) >> MT6360_IAICR_SHFT;
> > + val->intval = mt6360_map_real_val(regval,
> > + MT6360_AICR_MIN,
> > + MT6360_AICR_MAX,
> > + MT6360_AICR_STEP);
> > + return 0;
> > +}
> > +
> > +static int mt6360_charger_get_iprechg(struct mt6360_chg_info *mci,
> > + union power_supply_propval *val)
> > +{
> > + int ret;
> > + unsigned int regval;
> > +
> > + ret = regmap_read(mci->regmap, MT6360_PMU_CHG_CTRL8, ®val);
> > + if (ret < 0)
> > + return ret;
> > + regval = (regval & MT6360_IPREC_MASK) >> MT6360_IPREC_SHFT;
> > + val->intval = mt6360_map_real_val(regval,
> > + MT6360_IPREC_MIN,
> > + MT6360_IPREC_MAX,
> > + MT6360_IPREC_STEP);
> > + return 0;
> > +}
> > +
> > +static int mt6360_charger_get_ieoc(struct mt6360_chg_info *mci,
> > + union power_supply_propval *val)
> > +{
> > + int ret;
> > + unsigned int regval;
> > +
> > + ret = regmap_read(mci->regmap, MT6360_PMU_CHG_CTRL9, ®val);
> > + if (ret < 0)
> > + return ret;
> > + regval = (regval & MT6360_IEOC_MASK) >> MT6360_IEOC_SHFT;
> > + val->intval = mt6360_map_real_val(regval,
> > + MT6360_IEOC_MIN,
> > + MT6360_IEOC_MAX,
> > + MT6360_IEOC_STEP);
> > + return 0;
> > +}
> > +
> > +static int mt6360_charger_set_online(struct mt6360_chg_info *mci,
> > + const union power_supply_propval *val)
> > +{
> > + u8 force_sleep = val->intval ? 0 : 1;
> > +
> > + return regmap_update_bits(mci->regmap,
> > + MT6360_PMU_CHG_CTRL1,
> > + MT6360_FSLP_MASK,
> > + force_sleep << MT6360_FSLP_SHFT);
> > +}
> > +
> > +static int mt6360_charger_set_ichg(struct mt6360_chg_info *mci,
> > + const union power_supply_propval *val)
> > +{
> > + u8 sel;
> > +
> > + sel = mt6360_map_reg_sel(val->intval,
> > + MT6360_ICHG_MIN,
> > + MT6360_ICHG_MAX,
> > + MT6360_ICHG_STEP);
> > + return regmap_update_bits(mci->regmap,
> > + MT6360_PMU_CHG_CTRL7,
> > + MT6360_ICHG_MASK,
> > + sel << MT6360_ICHG_SHFT);
> > +}
> > +
> > +static int mt6360_charger_set_cv(struct mt6360_chg_info *mci,
> > + const union power_supply_propval *val)
> > +{
> > + u8 sel;
> > +
> > + sel = mt6360_map_reg_sel(val->intval,
> > + MT6360_VOREG_MIN,
> > + MT6360_VOREG_MAX,
> > + MT6360_VOREG_STEP);
> > + return regmap_update_bits(mci->regmap,
> > + MT6360_PMU_CHG_CTRL4,
> > + MT6360_VOREG_MASK,
> > + sel << MT6360_VOREG_SHFT);
> > +}
> > +
> > +static int mt6360_charger_set_aicr(struct mt6360_chg_info *mci,
> > + const union power_supply_propval *val)
> > +{
> > + u8 sel;
> > +
> > + sel = mt6360_map_reg_sel(val->intval,
> > + MT6360_AICR_MIN,
> > + MT6360_AICR_MAX,
> > + MT6360_AICR_STEP);
> > + return regmap_update_bits(mci->regmap,
> > + MT6360_PMU_CHG_CTRL3,
> > + MT6360_IAICR_MASK,
> > + sel << MT6360_IAICR_SHFT);
> > +}
> > +
> > +static int mt6360_charger_set_iprechg(struct mt6360_chg_info *mci,
> > + const union power_supply_propval *val)
> > +{
> > + u8 sel;
> > +
> > + sel = mt6360_map_reg_sel(val->intval,
> > + MT6360_IPREC_MIN,
> > + MT6360_IPREC_MAX,
> > + MT6360_IPREC_STEP);
> > + return regmap_update_bits(mci->regmap,
> > + MT6360_PMU_CHG_CTRL8,
> > + MT6360_IPREC_MASK,
> > + sel << MT6360_IPREC_SHFT);
> > +}
> > +
> > +static int mt6360_charger_set_ieoc(struct mt6360_chg_info *mci,
> > + const union power_supply_propval *val)
> > +{
> > + u8 sel;
> > +
> > + sel = mt6360_map_reg_sel(val->intval,
> > + MT6360_IEOC_MIN,
> > + MT6360_IEOC_MAX,
> > + MT6360_IEOC_STEP);
> > + return regmap_update_bits(mci->regmap,
> > + MT6360_PMU_CHG_CTRL9,
> > + MT6360_IEOC_MASK,
> > + sel << MT6360_IEOC_SHFT);
> > +}
> > +
> > +static int mt6360_charger_get_property(struct power_supply *psy,
> > + enum power_supply_property psp,
> > + union power_supply_propval *val)
> > +{
> > + struct mt6360_chg_info *mci = power_supply_get_drvdata(psy);
> > + int ret = 0;
> > +
> > + dev_dbg(mci->dev, "%s: prop = %d\n", __func__, psp);
>
> drop this debug message. It's only useful during development.
>
ACK
> > + switch (psp) {
> > + case POWER_SUPPLY_PROP_ONLINE:
> > + ret = mt6360_charger_get_online(mci, val);
> > + break;
> > + case POWER_SUPPLY_PROP_STATUS:
> > + ret = mt6360_charger_get_status(mci, val);
> > + break;
> > + case POWER_SUPPLY_PROP_CHARGE_TYPE:
> > + ret = mt6360_charger_get_charge_type(mci, val);
> > + break;
> > + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
> > + ret = mt6360_charger_get_ichg(mci, val);
> > + break;
> > + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
> > + ret = mt6360_charger_get_max_ichg(mci, val);
> > + break;
> > + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
> > + ret = mt6360_charger_get_cv(mci, val);
> > + break;
> > + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
> > + ret = mt6360_charger_get_max_cv(mci, val);
> > + break;
> > + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
> > + ret = mt6360_charger_get_aicr(mci, val);
> > + break;
> > + case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
> > + ret = mt6360_charger_get_iprechg(mci, val);
> > + break;
> > + case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
> > + ret = mt6360_charger_get_ieoc(mci, val);
> > + break;
> > + case POWER_SUPPLY_PROP_USB_TYPE:
> > + val->intval = mci->psy_usb_type;
> > + break;
> > + default:
> > + ret = -ENODATA;
> > + }
> > + return ret;
> > +}
> > +
> > +static int mt6360_charger_set_property(struct power_supply *psy,
> > + enum power_supply_property psp,
> > + const union power_supply_propval *val)
> > +{
> > + struct mt6360_chg_info *mci = power_supply_get_drvdata(psy);
> > + int ret;
> > +
> > + dev_dbg(mci->dev, "%s: prop = %d\n", __func__, psp);
>
> drop this debug message. It's only useful during development.
>
ACK
> > + switch (psp) {
> > + case POWER_SUPPLY_PROP_ONLINE:
> > + ret = mt6360_charger_set_online(mci, val);
> > + break;
> > + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
> > + ret = mt6360_charger_set_ichg(mci, val);
> > + break;
> > + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
> > + ret = mt6360_charger_set_cv(mci, val);
> > + break;
> > + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
> > + ret = mt6360_charger_set_aicr(mci, val);
> > + break;
> > + case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
> > + ret = mt6360_charger_set_iprechg(mci, val);
> > + break;
> > + case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
> > + ret = mt6360_charger_set_ieoc(mci, val);
> > + break;
> > + default:
> > + ret = -EINVAL;
> > + }
> > + return ret;
> > +}
> > +
> > +static int mt6360_charger_property_is_writeable(struct power_supply *psy,
> > + enum power_supply_property psp)
> > +{
> > + switch (psp) {
> > + case POWER_SUPPLY_PROP_ONLINE:
> > + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
> > + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
> > + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
> > + case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
> > + case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
> > + return 1;
> > + default:
> > + return 0;
> > + }
> > +}
> > +
> > +static enum power_supply_property mt6360_charger_properties[] = {
> > + POWER_SUPPLY_PROP_ONLINE,
> > + POWER_SUPPLY_PROP_STATUS,
> > + POWER_SUPPLY_PROP_CHARGE_TYPE,
> > + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
> > + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
> > + POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
> > + POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
> > + POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
> > + POWER_SUPPLY_PROP_PRECHARGE_CURRENT,
> > + POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
> > + POWER_SUPPLY_PROP_USB_TYPE,
> > +};
> > +
> > +static char *mt6360_charger_supplied_to[] = {
> > + "main-battery"
> > +};
> > +
> > +static const struct power_supply_desc mt6360_charger_desc = {
> > + .type = POWER_SUPPLY_TYPE_USB,
> > + .properties = mt6360_charger_properties,
> > + .num_properties = ARRAY_SIZE(mt6360_charger_properties),
> > + .get_property = mt6360_charger_get_property,
> > + .set_property = mt6360_charger_set_property,
> > + .property_is_writeable = mt6360_charger_property_is_writeable,
> > + .usb_types = mt6360_charger_usb_types,
> > + .num_usb_types = ARRAY_SIZE(mt6360_charger_usb_types),
> > +};
> > +
> > +static const struct regulator_ops mt6360_chg_otg_ops = {
> > + .list_voltage = regulator_list_voltage_linear,
> > + .enable = regulator_enable_regmap,
> > + .disable = regulator_disable_regmap,
> > + .is_enabled = regulator_is_enabled_regmap,
> > + .set_voltage_sel = regulator_set_voltage_sel_regmap,
> > + .get_voltage_sel = regulator_get_voltage_sel_regmap,
> > +};
> > +
> > +static const struct regulator_desc mt6360_otg_rdesc = {
> > + .of_match = "usb-otg-vbus",
> > + .name = "usb-otg-vbus",
> > + .ops = &mt6360_chg_otg_ops,
> > + .owner = THIS_MODULE,
> > + .type = REGULATOR_VOLTAGE,
> > + .min_uV = 4425000,
> > + .uV_step = 25000,
> > + .n_voltages = 57,
> > + .vsel_reg = MT6360_PMU_CHG_CTRL5,
> > + .vsel_mask = MT6360_VOBST_MASK,
> > + .enable_reg = MT6360_PMU_CHG_CTRL1,
> > + .enable_mask = MT6360_OPA_MODE_MASK,
> > +};
> > +
> > +static irqreturn_t mt6360_pmu_attach_i_handler(int irq, void *data)
> > +{
> > + struct mt6360_chg_info *mci = data;
> > + int ret;
> > + unsigned int usb_status;
> > + int last_usb_type;
> > +
> > + dev_dbg(mci->dev, "%s\n", __func__);
>
> please change string to something more sensible to users debugging
> problems without having read the driver code before, sth. like
> "received attach interrupt".
>
ACK
> > + mutex_lock(&mci->chgdet_lock);
> > + if (!mci->bc12_en) {
> > + dev_info(mci->dev, "%s: bc12 disabled, ignore irq\n", __func__);
> > + goto out;
> > + }
>
> Why is this info level? I would expect it to be either debug or
> warning/error. Also drop all those __func__ and provide proper
> debug messages instead.
>
ACK
> > + last_usb_type = mci->psy_usb_type;
> > + /* Plug in */
> > + ret = regmap_read(mci->regmap, MT6360_PMU_USB_STATUS1, &usb_status);
> > + if (ret < 0)
> > + goto out;
> > + usb_status &= MT6360_USB_STATUS_MASK;
> > + usb_status >>= MT6360_USB_STATUS_SHFT;
> > + switch (usb_status) {
> > + case MT6360_CHG_TYPE_UNDER_GOING:
> > + dev_info(mci->dev, "%s: under going...\n", __func__);
> > + goto out;
>
> IDK what this is supposed to tell me. Do you mean "detection in
> progress"? Also why is this info level? I would expect either
> debug (assuming it happens regularly and is normal) or warning
> (assuming it should not happen).
>
When handling attach interrupt and cable plug out at the same time, HW
change register status.
So we don' need to handle this attach interrupt at this case.
> > + case MT6360_CHG_TYPE_SDP:
> > + mci->psy_usb_type = POWER_SUPPLY_USB_TYPE_SDP;
> > + break;
> > + case MT6360_CHG_TYPE_SDPNSTD:
> > + mci->psy_usb_type = POWER_SUPPLY_USB_TYPE_SDP;
> > + break;
> > + case MT6360_CHG_TYPE_CDP:
> > + mci->psy_usb_type = POWER_SUPPLY_USB_TYPE_CDP;
> > + break;
> > + case MT6360_CHG_TYPE_DCP:
> > + mci->psy_usb_type = POWER_SUPPLY_USB_TYPE_DCP;
> > + break;
> > + default:
> > + dev_warn(mci->dev,
> > + "%s: disconnect or unknown status\n", __func__);
>
> So you are printing a warning on every disconnect?
> Please do not spam device messages.
>
Fixed. Should be "unknown status", not "disconnect", which is
undefined register value.
> > + goto out;
> > + }
> > +
> > + dev_info(mci->dev, "%s: chg_type = %d\n", __func__, mci->psy_usb_type);
>
> This should be debug level.
>
ACK
> > + if (last_usb_type != mci->psy_usb_type)
> > + power_supply_changed(mci->psy);
> > +out:
> > + mutex_unlock(&mci->chgdet_lock);
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static void mt6360_handle_chrdet_ext_evt(struct mt6360_chg_info *mci)
> > +{
> > + int ret;
> > + bool pwr_rdy;
> > +
> > + mutex_lock(&mci->chgdet_lock);
> > + ret = mt6360_get_chrdet_ext_stat(mci, &pwr_rdy);
> > + if (ret < 0)
> > + goto out;
> > + if (mci->pwr_rdy == pwr_rdy) {
> > + dev_info(mci->dev,
> > + "%s: pwr_rdy is same(%d)\n", __func__, pwr_rdy);
> > + goto out;
> > + }
> > + mci->pwr_rdy = pwr_rdy;
> > + dev_info(mci->dev, "%s: pwr_rdy = %d\n", __func__, pwr_rdy);
> > + if (!pwr_rdy) {
> > + mci->psy_usb_type = POWER_SUPPLY_USB_TYPE_UNKNOWN;
> > + power_supply_changed(mci->psy);
> > +
> > + }
> > + ret = regmap_update_bits(mci->regmap,
> > + MT6360_PMU_DEVICE_TYPE,
> > + MT6360_USBCHGEN_MASK,
> > + pwr_rdy ? MT6360_USBCHGEN_MASK : 0);
> > + if (ret < 0)
> > + goto out;
> > + mci->bc12_en = pwr_rdy;
> > +out:
> > + mutex_unlock(&mci->chgdet_lock);
> > +}
> > +
> > +static void mt6360_chrdet_work(struct work_struct *work)
> > +{
> > + struct mt6360_chg_info *mci = (struct mt6360_chg_info *)container_of(
> > + work, struct mt6360_chg_info, chrdet_work);
> > +
> > + dev_info(mci->dev, "%s\n", __func__);
> > + mt6360_handle_chrdet_ext_evt(mci);
> > +}
> > +
> > +static irqreturn_t mt6360_pmu_chrdet_ext_evt_handler(int irq, void *data)
> > +{
> > + struct mt6360_chg_info *mci = data;
> > +
> > + dev_info(mci->dev, "%s\n", __func__);
> > + mt6360_handle_chrdet_ext_evt(mci);
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static int mt6360_chg_irq_register(struct platform_device *pdev)
> > +{
> > + const struct {
> > + const char *name;
> > + irq_handler_t handler;
> > + } irq_descs[] = {
> > + { "attach_i", mt6360_pmu_attach_i_handler },
> > + { "chrdet_ext_evt", mt6360_pmu_chrdet_ext_evt_handler }
> > + };
> > + int i, ret;
> > +
> > + for (i = 0; i < ARRAY_SIZE(irq_descs); i++) {
> > + ret = platform_get_irq_byname(pdev, irq_descs[i].name);
> > + if (ret < 0)
> > + return ret;
> > +
> > + ret = devm_request_threaded_irq(&pdev->dev, ret, NULL,
> > + irq_descs[i].handler,
> > + IRQF_TRIGGER_FALLING,
> > + irq_descs[i].name,
> > + platform_get_drvdata(pdev));
> > + if (ret < 0) {
> > + dev_err(&pdev->dev, "Failed to request %s irq\n",
> > + irq_descs[i].name);
> > + return ret;
> > + }
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +struct mt6360_field_info {
> > + struct device_attribute dev_attr;
> > + u16 reg;
> > + u8 mask;
> > + u8 shft;
> > +};
> > +
> > +static ssize_t mt6360_sysfs_show(struct device *dev,
> > + struct device_attribute *attr, char *buf);
> > +static ssize_t mt6360_sysfs_store(struct device *dev,
> > + struct device_attribute *attr, const char *buf, size_t count);
> > +
> > +#define MT6360_FIELD_RW(_name, _reg, _nbit) \
> > +{ \
> > + .dev_attr = __ATTR(_name, 0664, \
> > + mt6360_sysfs_show, mt6360_sysfs_store), \
> > + .reg = MT6360_PMU_##_reg, \
> > + .mask = MT6360_##_nbit##_MASK, \
> > + .shft = MT6360_##_nbit##_SHFT, \
> > +}
> > +
> > +#define MT6360_FIELD_RO(_name, _reg, _nbit) \
> > +{ \
> > + .dev_attr = __ATTR(_name, 0444, \
> > + mt6360_sysfs_show, NULL), \
> > + .reg = MT6360_PMU_##_reg, \
> > + .mask = MT6360_##_nbit##_MASK, \
> > + .shft = MT6360_##_nbit##_SHFT, \
> > +}
> > +
> > +static struct mt6360_field_info mt6360_field_tbl[] = {
> > + MT6360_FIELD_RW(hiz, CHG_CTRL1, HIZ),
> > + MT6360_FIELD_RW(vmivr, CHG_CTRL6, VMIVR),
> > + MT6360_FIELD_RW(iaicr, CHG_CTRL3, IAICR),
> > + MT6360_FIELD_RW(SYSREG, CHG_CTRL11, SYSREG),
> > + MT6360_FIELD_RW(otg_oc, CHG_CTRL10, OTG_OC),
> > + MT6360_FIELD_RW(ichg, CHG_CTRL17, ICHG),
> > + MT6360_FIELD_RW(iprec, CHG_CTRL8, IPREC),
> > + MT6360_FIELD_RW(ieoc, CHG_CTRL9, IEOC),
> > + MT6360_FIELD_RW(voreg, CHG_CTRL4, VOREG),
> > + MT6360_FIELD_RW(lbp, CHG_CTRL10, LBP),
> > + MT6360_FIELD_RW(vrec, CHG_CTRL11, VREC),
> > + MT6360_FIELD_RW(te, CHG_CTRL2, TE),
> > + MT6360_FIELD_RW(chg_wdt_en, CHG_CTRL13, CHG_WDT_EN),
> > + MT6360_FIELD_RW(chg_wdt, CHG_CTRL13, CHG_WDT),
> > + MT6360_FIELD_RW(wt_fc, CHG_CTRL12, WT_FC),
> > + MT6360_FIELD_RW(bat_comp, CHG_CTRL18, BAT_COMP),
> > + MT6360_FIELD_RW(vclamp, CHG_CTRL18, VCLAMP),
> > + MT6360_FIELD_RW(usbchgen, DEVICE_TYPE, USBCHGEN),
> > + MT6360_FIELD_RW(chg_en, CHG_CTRL2, CHG_EN),
> > + MT6360_FIELD_RO(chrdet_ext, FOD_STAT, CHRDET_EXT),
> > +};
> > +
> > +static struct attribute *mt6360_attrs[ARRAY_SIZE(mt6360_field_tbl) + 1];
> > +
> > +static const struct attribute_group mt6360_attr_group = {
> > + .attrs = mt6360_attrs,
> > +};
> > +
> > +static ssize_t mt6360_sysfs_show(struct device *dev,
> > + struct device_attribute *attr, char *buf)
> > +{
> > + struct mt6360_chg_info *mci = dev_get_drvdata(dev->parent);
> > + struct mt6360_field_info *info = (void *)attr;
> > + unsigned int regval;
> > + int ret;
> > +
> > + ret = regmap_read(mci->regmap, info->reg, ®val);
> > + if (ret < 0)
> > + return ret;
> > + regval = (regval & info->mask) >> info->shft;
> > + return scnprintf(buf, PAGE_SIZE, "%02x\n", regval);
> > +}
> > +
> > +static ssize_t mt6360_sysfs_store(struct device *dev,
> > + struct device_attribute *attr, const char *buf, size_t count)
> > +{
> > + struct mt6360_chg_info *mci = dev_get_drvdata(dev->parent);
> > + struct mt6360_field_info *info = (void *)attr;
> > + int ret, tmp;
> > +
> > + if (kstrtoint(buf, 10, &tmp) < 0) {
> > + dev_err(dev, "Failed to parse number\n");
> > + return -EINVAL;
> > + }
> > + ret = regmap_update_bits(mci->regmap,
> > + info->reg, info->mask, tmp << info->shft);
> > + if (ret < 0)
> > + return ret;
> > + return count;
> > +}
> > +
> > +static int mt6360_sysfs_create_group(struct mt6360_chg_info *mci)
> > +{
> > + int i, tb_size = ARRAY_SIZE(mt6360_field_tbl);
> > +
> > + for (i = 0; i < tb_size; i++)
> > + mt6360_attrs[i] = &(mt6360_field_tbl[i].dev_attr.attr);
> > + return devm_device_add_group(&mci->psy->dev, &mt6360_attr_group);
> > +}
> > +
> > +static int mt6360_chg_init_setting(struct mt6360_chg_info *mci)
> > +{
> > + int ret;
> > +
> > + ret = regmap_update_bits(mci->regmap, MT6360_PMU_DEVICE_TYPE,
> > + MT6360_USBCHGEN_MASK, 0);
> > + if (ret < 0) {
> > + dev_err(mci->dev, "%s: Failed to disable bc12\n", __func__);
> > + goto out;
> > + }
> > + ret = regmap_update_bits(mci->regmap, MT6360_PMU_CHG_CTRL2,
> > + MT6360_IINLMTSEL_MASK,
> > + MT6360_IINLMTSEL_AICR <<
> > + MT6360_IINLMTSEL_SHFT);
> > + if (ret < 0) {
> > + dev_err(mci->dev,
> > + "%s: Failed to switch iinlmtsel to aicr\n", __func__);
> > + goto out;
> > + }
> > + usleep_range(5000, 6000);
> > + ret = regmap_update_bits(mci->regmap, MT6360_PMU_CHG_CTRL3,
> > + MT6360_ILIM_EN_MASK, 0);
> > + if (ret < 0) {
> > + dev_err(mci->dev,
> > + "%s: Failed to disable ilim\n", __func__);
> > + goto out;
> > + }
> > + ret = regmap_update_bits(mci->regmap, MT6360_PMU_CHG_CTRL10,
> > + MT6360_OTG_OC_MASK, MT6360_OTG_OC_MASK);
> > + if (ret < 0) {
> > + dev_err(mci->dev,
> > + "%s: Failed to config otg oc to 3A\n", __func__);
> > + }
> > +out:
> > + return ret;
>
> remove useless goto and return directly like this (without the
> __func__ part):
>
> ret = regmap_update_bits(...);
> if (ret < 0)
> return dev_err_probe(mci->dev, ret, "Failed to do xyz!\n").
>
ACK
> > +}
> > +
> > +static u32 mt6360_vinovp_trans_to_sel(u32 val)
> > +{
> > + u32 vinovp_tbl[] = { 5500000, 6500000, 11000000, 14500000 };
> > + int i;
> > +
> > + /* Select the smaller and equal supported value */
> > + for (i = 0; i < ARRAY_SIZE(vinovp_tbl)-1; i++) {
> > + if (val < vinovp_tbl[i+1])
> > + break;
> > + }
> > + return i;
> > +}
> > +
> > +static struct mt6360_chg_platform_data *mt6360_parse_pdata(
> > + struct platform_device *pdev)
> > +{
> > + struct mt6360_chg_platform_data *pdata = dev_get_platdata(&pdev->dev);
> > + struct device_node *np = pdev->dev.of_node;
> > + int ret;
> > +
> > + pdata = kmemdup(&def_platform_data, sizeof(*pdata), GFP_KERNEL);
> > + ret = of_property_read_u32(np, "richtek,vinovp-microvolt",
> > + &pdata->vinovp);
>
> use device_property_read_u32();
>
ACK
> > + if (ret) {
> > + dev_err(&pdev->dev, "Failed to parse vinovp in DT\n");
> > + return ERR_PTR(ret);
> > + }
> > + return pdata;
> > +}
> > +
> > +static int mt6360_apply_pdata(struct platform_device *pdev)
> > +{
> > + struct mt6360_chg_platform_data *pdata = dev_get_platdata(&pdev->dev);
> > + struct mt6360_chg_info *mci = dev_get_drvdata(&pdev->dev);
> > + int ret;
> > + u32 sel;
> > +
> > + sel = mt6360_vinovp_trans_to_sel(pdata->vinovp);
> > + ret = regmap_update_bits(mci->regmap, MT6360_PMU_CHG_CTRL19,
> > + MT6360_VINOVP_MASK, sel << MT6360_VINOVP_SHFT);
> > + if (ret)
> > + return ret;
> > + return 0;
> > +}
> > +
> > +static int mt6360_charger_probe(struct platform_device *pdev)
> > +{
> > + struct mt6360_chg_platform_data *pdata = dev_get_platdata(&pdev->dev);
>
> The value is unused, so init to NULL or not at all.
>
ACK
> > + struct mt6360_chg_info *mci;
> > + struct power_supply_config charger_cfg = {};
> > + struct regulator_config config = { };
> > + int ret;
> > +
> > + mci = devm_kzalloc(&pdev->dev, sizeof(*mci), GFP_KERNEL);
> > + if (!mci)
> > + return -ENOMEM;
> > +
> > + pdata = mt6360_parse_pdata(pdev);
> > + if (IS_ERR_OR_NULL(pdata))
> > + return PTR_ERR(pdata);
> > +
> > + pdev->dev.platform_data = pdata;
>
> instead of all this code for a single variable, just store it
> directly into struct mt6360_chg_info and drop all that
> platform_data code. Also no need to move it into extra function:
>
> mci->vinovp = 6500000;
> device_property_read_u32(&pdev->dev, "richtek,vinovp-microvolt", &mci->vinovp);
>
ACK
> > + mci->dev = &pdev->dev;
> > + mutex_init(&mci->chgdet_lock);
> > + platform_set_drvdata(pdev, mci);
> > + INIT_WORK(&mci->chrdet_work, &mt6360_chrdet_work);
> > +
> > + mci->regmap = dev_get_regmap(pdev->dev.parent, NULL);
> > + if (!mci->regmap) {
> > + dev_err(&pdev->dev, "Failed to get parent regmap\n");
> > + return -ENODEV;
> > + }
>
> use 'return dev_err_probe(&pdev->dev, -ENODEV, "...");
>
ACK
> > + ret = mt6360_apply_pdata(pdev);
> > + if (ret) {
> > + dev_err(&pdev->dev, "Failed to apply pdata\n");
> > + return ret;
> > + }
>
> use 'return dev_err_probe(&pdev->dev, ret, "...");
>
> Also can this function be folded into mt6360_chg_init_setting()?
>
ACK
> > + memcpy(&mci->psy_desc, &mt6360_charger_desc, sizeof(mci->psy_desc));
> > + mci->psy_desc.name = dev_name(&pdev->dev);
> > + charger_cfg.drv_data = mci;
> > + charger_cfg.of_node = pdev->dev.of_node;
> > + charger_cfg.supplied_to = mt6360_charger_supplied_to;
> > + charger_cfg.num_supplicants = ARRAY_SIZE(mt6360_charger_supplied_to);
>
> why do you need to provide supplied_to? this should be generated
> automatically from devicetree.
>
ACK
> > + mci->psy = devm_power_supply_register(&pdev->dev,
> > + &mci->psy_desc, &charger_cfg);
> > + if (IS_ERR(mci->psy)) {
> > + dev_err(&pdev->dev, "Failed to register power supply dev\n");
> > + return PTR_ERR(mci->psy);
> > + }
>
> dev_err_probe()
>
ACK
> > +
> > + ret = mt6360_chg_init_setting(mci);
> > + if (ret) {
> > + dev_err(&pdev->dev, "Failed to initial setting\n");
> > + return ret;
> > + }
>
> dev_err_probe()
>
> > + schedule_work(&mci->chrdet_work);
>
ACK
> considering work is only scheduled once in this place, why do you
> need it? can't you simply call mt6360_handle_chrdet_ext_evt() here
> and remove all worker related code?
>
> > + ret = mt6360_chg_irq_register(pdev);
> > + if (ret) {
> > + dev_err(&pdev->dev, "Failed to register irqs\n");
> > + return ret;
> > + }
>
> dev_err_probe();
>
ACK
> > + config.dev = &pdev->dev;
> > + config.regmap = mci->regmap;
> > + mci->otg_rdev = devm_regulator_register(&pdev->dev, &mt6360_otg_rdesc,
> > + &config);
> > + if (IS_ERR(mci->otg_rdev))
> > + return PTR_ERR(mci->otg_rdev);
> > +
> > + ret = mt6360_sysfs_create_group(mci);
> > + if (ret) {
> > + dev_err(&pdev->dev,
> > + "%s: Failed to create sysfs attrs\n", __func__);
> > + return ret;
> > + }
>
> Use charger_cfg.attr_grp to register custom sysfs group for
> power-supply devices. Otherwise your code is racy (udev may not pick
> up the sysfs attributes). Also custom sysfs attributes need to be
> documented in Documentation/ABI/testing/sysfs-class-power-<driver>.
>
> Looking at the attributes you are planning to expose, I don't think they
> are suitable for sysfs anyways. Looks more like a debug interface, which
> should go into debugfs instead. But it's hard to tell without any documentation
> being provided :)
>
ACK, I will change to charger_cfg.attr_grp.
I assumed the charger algorithm thread is in user space, and take
control by sysfs node from charger device, like bq24190.c.
Should I change to debugfs?
> > + return 0;
> > +}
> > +
> > +static const struct of_device_id __maybe_unused mt6360_charger_of_id[] = {
> > + { .compatible = "mediatek,mt6360-chg", },
> > + {},
> > +};
> > +MODULE_DEVICE_TABLE(of, mt6360_charger_of_id);
> > +
> > +static const struct platform_device_id mt6360_charger_id[] = {
> > + { "mt6360-chg", 0 },
> > + {},
> > +};
> > +MODULE_DEVICE_TABLE(platform, mt6360_charger_id);
> > +
> > +static struct platform_driver mt6360_charger_driver = {
> > + .driver = {
> > + .name = "mt6360-chg",
> > + .of_match_table = of_match_ptr(mt6360_charger_of_id),
> > + },
> > + .probe = mt6360_charger_probe,
> > + .id_table = mt6360_charger_id,
> > +};
> > +module_platform_driver(mt6360_charger_driver);
> > +
> > +MODULE_AUTHOR("CY_Huang <cy_huang at richtek.com>");
>
> Can you fix the name? Also it differs from you, but I do not see any
> extra Signed-off-by line?
>
ACK
> Thanks,
>
> -- Sebastian
>
> > +MODULE_DESCRIPTION("MT6360 Charger Driver");
> > +MODULE_LICENSE("GPL");
> > --
> > 2.7.4
> >
More information about the Linux-mediatek
mailing list