[PATCH 5/6] mt76: mt7915: calculate new packet length when tx_time is set in testmode
Shayne Chen
shayne.chen at mediatek.com
Tue Jan 5 03:55:28 EST 2021
If tx_time is set, calculate a new packet length based on tx time and
tx rate.
Signed-off-by: Shayne Chen <shayne.chen at mediatek.com>
---
.../wireless/mediatek/mt76/mt7915/testmode.c | 96 ++++++++++++++++++-
1 file changed, 93 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/testmode.c b/drivers/net/wireless/mediatek/mt76/mt7915/testmode.c
index 748c9b55e498..a8e639ffe6de 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/testmode.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/testmode.c
@@ -237,6 +237,96 @@ mt7915_tm_set_ipg_params(struct mt7915_phy *phy, u32 ipg, u8 mode)
aifsn, cw, cw, 0);
}
+static int
+mt7915_tm_set_tx_len(struct mt7915_phy *phy, u32 tx_time)
+{
+ struct mt76_phy *mphy = phy->mt76;
+ struct mt76_testmode_data *td = &mphy->test;
+ struct sk_buff *old = td->tx_skb, *new;
+ struct ieee80211_supported_band *sband;
+ struct rate_info rate = {};
+ u16 flags = 0, tx_len;
+ u32 bitrate;
+
+ if (!tx_time || !old)
+ return 0;
+
+ rate.mcs = td->tx_rate_idx;
+ rate.nss = td->tx_rate_nss;
+
+ switch (td->tx_rate_mode) {
+ case MT76_TM_TX_MODE_CCK:
+ case MT76_TM_TX_MODE_OFDM:
+ if (mphy->chandef.chan->band == NL80211_BAND_5GHZ)
+ sband = &mphy->sband_5g.sband;
+ else
+ sband = &mphy->sband_2g.sband;
+
+ rate.legacy = sband->bitrates[rate.mcs].bitrate;
+ break;
+ case MT76_TM_TX_MODE_HT:
+ rate.mcs += rate.nss * 8;
+ flags |= RATE_INFO_FLAGS_MCS;
+
+ if (td->tx_rate_sgi)
+ flags |= RATE_INFO_FLAGS_SHORT_GI;
+ break;
+ case MT76_TM_TX_MODE_VHT:
+ flags |= RATE_INFO_FLAGS_VHT_MCS;
+
+ if (td->tx_rate_sgi)
+ flags |= RATE_INFO_FLAGS_SHORT_GI;
+ break;
+ case MT76_TM_TX_MODE_HE_SU:
+ case MT76_TM_TX_MODE_HE_EXT_SU:
+ case MT76_TM_TX_MODE_HE_TB:
+ case MT76_TM_TX_MODE_HE_MU:
+ rate.he_gi = td->tx_rate_sgi;
+ flags |= RATE_INFO_FLAGS_HE_MCS;
+ break;
+ default:
+ break;
+ }
+ rate.flags = flags;
+
+ switch (mphy->chandef.width) {
+ case NL80211_CHAN_WIDTH_160:
+ case NL80211_CHAN_WIDTH_80P80:
+ rate.bw = RATE_INFO_BW_160;
+ break;
+ case NL80211_CHAN_WIDTH_80:
+ rate.bw = RATE_INFO_BW_80;
+ break;
+ case NL80211_CHAN_WIDTH_40:
+ rate.bw = RATE_INFO_BW_40;
+ break;
+ default:
+ rate.bw = RATE_INFO_BW_20;
+ break;
+ }
+
+ bitrate = cfg80211_calculate_bitrate(&rate);
+ tx_len = bitrate * tx_time / 10 / 8;
+
+ if (tx_len < sizeof(struct ieee80211_hdr))
+ tx_len = sizeof(struct ieee80211_hdr);
+ else if (tx_len > IEEE80211_MAX_FRAME_LEN)
+ tx_len = IEEE80211_MAX_FRAME_LEN;
+
+ new = alloc_skb(tx_len, GFP_KERNEL);
+ if (!new)
+ return -ENOMEM;
+
+ skb_copy_header(new, old);
+ __skb_put_zero(new, tx_len);
+ memcpy(new->data, old->data, sizeof(struct ieee80211_hdr));
+
+ dev_kfree_skb(old);
+ td->tx_skb = new;
+
+ return 0;
+}
+
static void
mt7915_tm_reg_backup_restore(struct mt7915_phy *phy)
{
@@ -312,7 +402,6 @@ mt7915_tm_set_tx_frames(struct mt7915_phy *phy, bool en)
9, 8, 6, 10, 16, 12, 18, 0};
struct mt76_testmode_data *td = &phy->mt76->test;
struct mt7915_dev *dev = phy->dev;
- struct sk_buff *skb = td->tx_skb;
struct ieee80211_tx_info *info;
u8 duty_cycle = td->tx_duty_cycle;
u32 tx_time = td->tx_time;
@@ -347,14 +436,15 @@ mt7915_tm_set_tx_frames(struct mt7915_phy *phy, bool en)
}
mt7915_tm_set_ipg_params(phy, ipg, td->tx_rate_mode);
+ mt7915_tm_set_tx_len(phy, tx_time);
if (ipg)
td->tx_queued_limit = MT76_TM_TIMEOUT * 1000000 / ipg / 2;
- if (!en || !skb)
+ if (!en || !td->tx_skb)
return;
- info = IEEE80211_SKB_CB(skb);
+ info = IEEE80211_SKB_CB(td->tx_skb);
info->control.vif = phy->monitor_vif;
mt7915_tm_set_trx(phy, TM_MAC_TX, en);
--
2.29.2
More information about the Linux-mediatek
mailing list