[v8,6/7] PCI: mediatek-gen3: Add system PM support

[Jianjun Wang]

Hi Krzysztof,

Thanks for your suggestion, I will fix it in the next version.

On Thu, 2021-02-25 at 23:00 +0100, Krzysztof Wilczyński wrote:
> Hi Jianjun,
> 
> [...]
> > Thanks for your review,
> 
> Thank YOU for all the work here!
>  
> [...]
> > > > Add suspend_noirq and resume_noirq callback functions to implement
> > > > PM system suspend hooks for MediaTek Gen3 PCIe controller.
> > > 
> > > So, "systems suspend" and "resume" hooks, correct?
> > 
> > The callback functions is suspend_noirq and resume_noirq, should I use
> > "systems suspend" and "resume" in the commit message?
> [...]
> 
> 
> What I meant was something along these lines:
> 
>   Add suspend_noirq and resume_noirq callback functions to implement PM
>   system suspend and resume hooks for the MediaTek Gen3 PCIe controller.
>   
>   When the system suspends, trigger the PCIe link to enter the L2 state
>   and pull down the PERST# pin, gating the clocks of the MAC layer, and
>   then power-off the physical layer to provide power-saving.
>   
>   When the system resumes, the PCIe link should be re-established and the
>   related control register values should be restored.
> 
> The above is just a suggestion, thus feel tree to ignore it completely,
> and it's heavily based on your original commit message.
> 
> Krzysztof

Thanks.