[PATCH 1/2] mt76: mt7921: fix the base of PCIe interrupt

[sean.wang at mediatek.com]

From: Sean Wang <sean.wang at mediatek.com>

Should use 0x10000 as the base to operate PCIe interrupt according
to the vendor reference driver.

Fixes: ffa1bf97425b ("mt76: mt7921: introduce PM support")
Co-developed-by: YN Chen <YN.Chen at mediatek.com>
Signed-off-by: YN Chen <YN.Chen at mediatek.com>
Signed-off-by: Sean Wang <sean.wang at mediatek.com>
---
 drivers/net/wireless/mediatek/mt76/mt7921/pci.c  | 4 ++--
 drivers/net/wireless/mediatek/mt76/mt7921/regs.h | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/pci.c b/drivers/net/wireless/mediatek/mt76/mt7921/pci.c
index 3e430c04c97e..def8b7816609 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/pci.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/pci.c
@@ -137,7 +137,7 @@ static int mt7921_pci_probe(struct pci_dev *pdev,
 
 	mt76_wr(dev, MT_WFDMA0_HOST_INT_ENA, 0);
 
-	mt7921_l1_wr(dev, MT_PCIE_MAC_INT_ENABLE, 0xff);
+	mt76_wr(dev, MT_PCIE_MAC_INT_ENABLE, 0xff);
 
 	ret = devm_request_irq(mdev->dev, pdev->irq, mt7921_irq_handler,
 			       IRQF_SHARED, KBUILD_MODNAME, dev);
@@ -248,7 +248,7 @@ static int mt7921_pci_resume(struct pci_dev *pdev)
 		return 0;
 
 	/* enable interrupt */
-	mt7921_l1_wr(dev, MT_PCIE_MAC_INT_ENABLE, 0xff);
+	mt76_wr(dev, MT_PCIE_MAC_INT_ENABLE, 0xff);
 	mt7921_irq_enable(dev, MT_INT_RX_DONE_ALL | MT_INT_TX_DONE_ALL |
 			  MT_INT_MCU_CMD);
 
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/regs.h b/drivers/net/wireless/mediatek/mt76/mt7921/regs.h
index 419add751980..c4bd31cc81cb 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/regs.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/regs.h
@@ -391,7 +391,7 @@
 #define MT_HW_CHIPID			0x70010200
 #define MT_HW_REV			0x70010204
 
-#define MT_PCIE_MAC_BASE		0x74030000
+#define MT_PCIE_MAC_BASE		0x10000
 #define MT_PCIE_MAC(ofs)		(MT_PCIE_MAC_BASE + (ofs))
 #define MT_PCIE_MAC_INT_ENABLE		MT_PCIE_MAC(0x188)
 
-- 
2.25.1