[PATCH v3 1/3] dt-binding: gce: add gce header file for mt8192
Chun-Kuang Hu
chunkuang.hu at kernel.org
Fri Feb 5 11:35:05 EST 2021
Hi, Hsin-Yi:
Hsin-Yi Wang <hsinyi at chromium.org> 於 2021年2月5日 週五 下午3:19寫道：
>
> From: Yongqiang Niu <yongqiang.niu at mediatek.com>
>
> Add documentation for the mt8192 gce.
>
> Add gce header file defined the gce hardware event,
> subsys number and constant for mt8192.
>
> Signed-off-by: Yongqiang Niu <yongqiang.niu at mediatek.com>
> Reviewed-by: Rob Herring <robh at kernel.org>
> Signed-off-by: Hsin-Yi Wang <hsinyi at chromium.org>
> ---
> .../devicetree/bindings/mailbox/mtk-gce.txt | 7 +-
> include/dt-bindings/gce/mt8192-gce.h | 419 ++++++++++++++++++
> 2 files changed, 423 insertions(+), 3 deletions(-)
> create mode 100644 include/dt-bindings/gce/mt8192-gce.h
>
> diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
> index 7771ecaac5868..ac4245050d17d 100644
> --- a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
> +++ b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
> @@ -9,8 +9,8 @@ CMDQ driver uses mailbox framework for communication. Please refer to
> mailbox.txt for generic information about mailbox device-tree bindings.
>
> Required properties:
> -- compatible: can be "mediatek,mt8173-gce", "mediatek,mt8183-gce" or
> - "mediatek,mt6779-gce".
> +- compatible: can be "mediatek,mt8173-gce", "mediatek,mt8183-gce",
> + "mediatek,mt8192-gce" or "mediatek,mt6779-gce".
> - reg: Address range of the GCE unit
> - interrupts: The interrupt signal from the GCE block
> - clock: Clocks according to the common clock binding
> @@ -36,7 +36,8 @@ Optional properties for a client device:
> size: the total size of register address that GCE can access.
>
> Some vaules of properties are defined in 'dt-bindings/gce/mt8173-gce.h',
> -'dt-binding/gce/mt8183-gce.h' or 'dt-bindings/gce/mt6779-gce.h'. Such as
> +'dt-binding/gce/mt8183-gce.h', 'dt-binding/gce/mt8192-gce.h' or
> +'dt-bindings/gce/mt6779-gce.h'. Such as
> sub-system ids, thread priority, event ids.
>
> Example:
> diff --git a/include/dt-bindings/gce/mt8192-gce.h b/include/dt-bindings/gce/mt8192-gce.h
> new file mode 100644
> index 0000000000000..062754416bfda
> --- /dev/null
> +++ b/include/dt-bindings/gce/mt8192-gce.h
> @@ -0,0 +1,419 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2020 MediaTek Inc.
> + * Author: Yongqiang Niu <yongqiang.niu at mediatek.com>
> + */
> +
> +#ifndef _DT_BINDINGS_GCE_MT8192_H
> +#define _DT_BINDINGS_GCE_MT8192_H
> +
> +/* assign timeout 0 also means default */
> +#define CMDQ_NO_TIMEOUT 0xffffffff
> +#define CMDQ_TIMEOUT_DEFAULT 1000
> +
> +/* GCE thread priority */
> +#define CMDQ_THR_PRIO_LOWEST 0
> +#define CMDQ_THR_PRIO_1 1
> +#define CMDQ_THR_PRIO_2 2
> +#define CMDQ_THR_PRIO_3 3
> +#define CMDQ_THR_PRIO_4 4
> +#define CMDQ_THR_PRIO_5 5
> +#define CMDQ_THR_PRIO_6 6
> +#define CMDQ_THR_PRIO_HIGHEST 7
> +
> +/* CPR count in 32bit register */
> +#define GCE_CPR_COUNT 1312
> +
> +/* GCE subsys table */
> +#define SUBSYS_1300XXXX 0
> +#define SUBSYS_1400XXXX 1
> +#define SUBSYS_1401XXXX 2
> +#define SUBSYS_1402XXXX 3
> +#define SUBSYS_1502XXXX 4
> +#define SUBSYS_1880XXXX 5
> +#define SUBSYS_1881XXXX 6
> +#define SUBSYS_1882XXXX 7
> +#define SUBSYS_1883XXXX 8
> +#define SUBSYS_1884XXXX 9
> +#define SUBSYS_1000XXXX 10
> +#define SUBSYS_1001XXXX 11
> +#define SUBSYS_1002XXXX 12
> +#define SUBSYS_1003XXXX 13
> +#define SUBSYS_1004XXXX 14
> +#define SUBSYS_1005XXXX 15
> +#define SUBSYS_1020XXXX 16
> +#define SUBSYS_1028XXXX 17
> +#define SUBSYS_1700XXXX 18
> +#define SUBSYS_1701XXXX 19
> +#define SUBSYS_1702XXXX 20
> +#define SUBSYS_1703XXXX 21
> +#define SUBSYS_1800XXXX 22
> +#define SUBSYS_1801XXXX 23
> +#define SUBSYS_1802XXXX 24
> +#define SUBSYS_1804XXXX 25
> +#define SUBSYS_1805XXXX 26
> +#define SUBSYS_1808XXXX 27
> +#define SUBSYS_180aXXXX 28
> +#define SUBSYS_180bXXXX 29
> +#define SUBSYS_NO_SUPPORT 99
Why define no support?
> +
> +/* GCE General Purpose Register (GPR) support
> + * Leave note for scenario usage here
> + */
> +/* GCE: write mask */
> +#define GCE_GPR_R00 0x00
> +#define GCE_GPR_R01 0x01
> +/* MDP: P1: JPEG dest */
> +#define GCE_GPR_R02 0x02
> +#define GCE_GPR_R03 0x03
> +/* MDP: PQ color */
> +#define GCE_GPR_R04 0x04
> +/* MDP: 2D sharpness */
> +#define GCE_GPR_R05 0x05
> +/* DISP: poll esd */
> +#define GCE_GPR_R06 0x06
> +#define GCE_GPR_R07 0x07
> +/* MDP: P4: 2D sharpness dst */
> +#define GCE_GPR_R08 0x08
> +#define GCE_GPR_R09 0x09
> +/* VCU: poll with timeout for GPR timer */
> +#define GCE_GPR_R10 0x0A
> +#define GCE_GPR_R11 0x0B
> +/* CMDQ: debug */
> +#define GCE_GPR_R12 0x0C
> +#define GCE_GPR_R13 0x0D
> +/* CMDQ: P7: debug */
> +#define GCE_GPR_R14 0x0E
> +#define GCE_GPR_R15 0x0F
> +
If there are 1024 general registers, you would have 1024 definition here?
[snip]
> +#define CMDQ_EVENT_OUT_EVENT_0 898
If the sw token is from 512 to 1023, is this sw token?
> +
> +/* CMDQ sw tokens
> + * Following definitions are gce sw token which may use by clients
> + * event operation API.
> + * Note that token 512 to 639 may set secure
> + */
> +
> +/* end of hw event and begin of sw token */
> +#define CMDQ_MAX_HW_EVENT 512
> +
> +/* Config thread notify trigger thread */
> +#define CMDQ_SYNC_TOKEN_CONFIG_DIRTY 640
> +/* Trigger thread notify config thread */
> +#define CMDQ_SYNC_TOKEN_STREAM_EOF 641
> +/* Block Trigger thread until the ESD check finishes. */
> +#define CMDQ_SYNC_TOKEN_ESD_EOF 642
> +#define CMDQ_SYNC_TOKEN_STREAM_BLOCK 643
> +/* check CABC setup finish */
> +#define CMDQ_SYNC_TOKEN_CABC_EOF 644
> +
> +/* Notify normal CMDQ there are some secure task done
> + * MUST NOT CHANGE, this token sync with secure world
> + */
> +#define CMDQ_SYNC_SECURE_THR_EOF 647
> +
> +/* CMDQ use sw token */
> +#define CMDQ_SYNC_TOKEN_USER_0 649
> +#define CMDQ_SYNC_TOKEN_USER_1 650
> +#define CMDQ_SYNC_TOKEN_POLL_MONITOR 651
> +
> +/* ISP sw token */
> +#define CMDQ_SYNC_TOKEN_MSS 665
> +#define CMDQ_SYNC_TOKEN_MSF 666
> +
> +/* DISP sw token */
> +#define CMDQ_SYNC_TOKEN_SODI 671
sw token is an event which is trigger by software. Each driver could
choose some sw token to use. But I think each sw token could be used
by any driver. So this definition is a software definition and it
should be placed in driver.
> +
> +/* GPR access tokens (for HW register backup)
> + * There are 15 32-bit GPR, 3 GPR form a set
> + * (64-bit for address, 32-bit for value)
> + * MUST NOT CHANGE, these tokens sync with MDP
> + */
> +#define CMDQ_SYNC_TOKEN_GPR_SET_0 700
> +#define CMDQ_SYNC_TOKEN_GPR_SET_1 701
> +#define CMDQ_SYNC_TOKEN_GPR_SET_2 702
> +#define CMDQ_SYNC_TOKEN_GPR_SET_3 703
> +#define CMDQ_SYNC_TOKEN_GPR_SET_4 704
This looks like software definition.
> +
> +/* Resource lock event to control resource in GCE thread */
> +#define CMDQ_SYNC_RESOURCE_WROT0 710
> +#define CMDQ_SYNC_RESOURCE_WROT1 711
This looks like software definition.
Regards,
Chun-Kuang.
> +
> +#define CMDQ_EVENT_MAX 0x3FF
> +/* CMDQ sw tokens END */
> +
> +#endif
> --
> 2.30.0.365.g02bc693789-goog
>
>
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek
More information about the Linux-mediatek
mailing list