[RFC PATCH 3/3] arm64: dts: mt8195: add USB related nodes

Chunfeng Yun chunfeng.yun at mediatek.com
Wed Feb 3 01:31:59 EST 2021


Add USB nodes, PHY nodes and some fixed regulator nodes.
We prefer to use mt8192's compatible for the first USB controller
(port0), there is no wrong with the SOF/ITP interval; but for other
controllers (port1~port3) should use mt8195's one due to the wrong
default setting of SOF/ITP interval which should be calculated from
48M, but not 24M by default.

Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
---
 arch/arm64/boot/dts/mediatek/mt8195-evb.dts |  70 +++++++++
 arch/arm64/boot/dts/mediatek/mt8195.dtsi    | 163 ++++++++++++++++++++
 2 files changed, 233 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8195-evb.dts b/arch/arm64/boot/dts/mediatek/mt8195-evb.dts
index 7264232bb7e9..a60682752e19 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8195-evb.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 #include "mt8195.dtsi"
 #include "mt6359.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "MediaTek MT8195 evaluation board";
@@ -49,6 +50,36 @@
 	        enable-active-high;
 	        regulator-always-on;
 	};
+
+	usb_p0_vbus: regulator at 2 {
+		compatible = "regulator-fixed";
+		gpio = <&pio 129 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vbus0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	usb_p2_vbus: regulator at 3 {
+		compatible = "regulator-fixed";
+		gpio = <&pio 131 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vbus2";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	usb_p3_vbus: regulator at 4 {
+		compatible = "regulator-fixed";
+		gpio = <&pio 5 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vbus3";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+	};
 };
 
 &pmic {
@@ -156,6 +187,22 @@
 	status = "okay";
 };
 
+&u3phy0 {
+	status="okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
+
+&u3phy2 {
+	status="okay";
+};
+
+&u3phy3 {
+	status="okay";
+};
+
 &pio {
 	nor_pins_default: nordefault {
 		pins0 {
@@ -311,3 +358,26 @@
 	};
 };
 
+
+&xhci0 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	vbus-supply = <&usb_p0_vbus>;
+	status = "okay";
+};
+
+&xhci1 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&xhci2 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	vbus-supply = <&usb_p2_vbus>;
+	status = "okay";
+};
+
+&xhci3 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	vbus-supply = <&usb_p3_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index ccb9d24b1c1e..60c75b23cf03 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -9,6 +9,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/memory/mt8195-memory-port.h>
+#include <dt-bindings/phy/phy.h>
 #include <dt-bindings/pinctrl/mt8195-pinfunc.h>
 #include <dt-bindings/power/mt8195-power.h>
 #include <dt-bindings/reset/ti-syscon.h>
@@ -914,6 +915,83 @@
 			status = "disabled";
 		};
 
+		xhci0: usb at 11200000 {
+			compatible = "mediatek,mt8192-xhci",
+				     "mediatek,mtk-xhci";
+			reg = <0 0x11200000 0 0x1000>,
+			      <0 0x11203e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&u2port0 PHY_TYPE_USB2>,
+			       <&u3port0 PHY_TYPE_USB3>;
+			assigned-clocks = <&topckgen CLK_TOP_USB_SEL>,
+					  <&topckgen CLK_TOP_SSUSB_XHCI_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB>,
+				 <&infracfg_ao CLK_INFRA_AO_SSUSB_XHCI>,
+				 <&topckgen CLK_TOP_SSUSB_REF>;
+			clock-names = "sys_ck", "xhci_ck", "ref_ck";
+			status = "disabled";
+		};
+
+		xhci1: usb at 11290000 {
+			compatible = "mediatek,mt8195-xhci",
+				     "mediatek,mtk-xhci";
+			reg = <0 0x11290000 0 0x1000>,
+			      <0 0x11293e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&u2port1 PHY_TYPE_USB2>;
+			assigned-clocks = <&topckgen CLK_TOP_USB_1P_SEL>,
+					  <&topckgen CLK_TOP_SSUSB_XHCI_1P_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_1P_BUS>,
+				 <&pericfg_ao CLK_PERI_AO_SSUSB_1P_XHCI>,
+				 <&topckgen CLK_TOP_SSUSB_P1_REF>;
+			clock-names = "sys_ck", "xhci_ck", "ref_ck";
+			status = "disabled";
+		};
+
+		xhci2: usb at 112a0000 {
+			compatible = "mediatek,mt8195-xhci",
+				     "mediatek,mtk-xhci";
+			reg = <0 0x112a0000 0 0x1000>,
+			      <0 0x112a3e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&u2port2 PHY_TYPE_USB2>;
+			assigned-clocks = <&topckgen CLK_TOP_USB_2P_SEL>,
+					  <&topckgen CLK_TOP_SSUSB_XHCI_2P_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_2P_BUS>,
+				 <&pericfg_ao CLK_PERI_AO_SSUSB_2P_XHCI>,
+				 <&topckgen CLK_TOP_SSUSB_P2_REF>;
+			clock-names = "sys_ck", "xhci_ck", "ref_ck";
+			status = "disabled";
+		};
+
+		xhci3: usb at 112b0000 {
+			compatible = "mediatek,mt8195-xhci",
+				     "mediatek,mtk-xhci";
+			reg = <0 0x112b0000 0 0x1000>,
+			      <0 0x112b3e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&u2port3 PHY_TYPE_USB2>;
+			assigned-clocks = <&topckgen CLK_TOP_USB_3P_SEL>,
+					  <&topckgen CLK_TOP_SSUSB_XHCI_3P_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_3P_BUS>,
+				 <&pericfg_ao CLK_PERI_AO_SSUSB_3P_XHCI>,
+				 <&topckgen CLK_TOP_SSUSB_P3_REF>;
+			clock-names = "sys_ck", "xhci_ck", "ref_ck";
+			status = "disabled";
+		};
+
 		pcie0: pcie at 112f0000 {
 			device_type = "pci";
 			compatible = "mediatek,mt8195-pcie";
@@ -998,6 +1076,40 @@
 			status = "disabled";
 		};
 
+		u3phy2: usb-phy2 at 11c40000 {
+			compatible = "mediatek,mt8195-tphy",
+				     "mediatek,generic-tphy-v2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x11c40000 0x700>;
+			status = "disabled";
+
+			u2port2: usb2-phy2 at 0 {
+				reg = <0 0x700>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_P2_REF>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				status = "disabled";
+			};
+		};
+
+		u3phy3: usb-phy3 at 11c50000 {
+			compatible = "mediatek,mt8195-tphy",
+				     "mediatek,generic-tphy-v2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x11c50000 0x700>;
+			status = "disabled";
+
+			u2port3: usb2-phy3 at 0 {
+				reg = <0 0x700>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_P3_REF>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				status = "okay";
+			};
+		};
+
 		i2c5: i2c5 at 11d00000 {
 			compatible = "mediatek,mt8195-i2c",
 				"mediatek,mt8192-i2c";
@@ -1138,6 +1250,57 @@
 			#clock-cells = <1>;
 		};
 
+		u3phy1: usb-phy1 at 11e30000 {
+			compatible = "mediatek,mt8195-tphy",
+				     "mediatek,generic-tphy-v2";
+			power-domains = <&spm MT8195_POWER_DOMAIN_SSUSB_PCIE_PHY>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x11e30000 0x1000>;
+			status = "disabled";
+
+			u2port1: usb2-phy1 at 0 {
+				reg = <0 0x700>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_P1_REF>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				status = "okay";
+			};
+
+			u3port1: usb3-phy1 at 700 {
+				reg = <0x700 0x900>;
+				clocks = <&apmixedsys CLK_APMIXED_PLL_SSUSB26M>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				status = "okay";
+			};
+		};
+
+		u3phy0: usb-phy0 at 11e40000 {
+			compatible = "mediatek,mt8195-tphy",
+				     "mediatek,generic-tphy-v2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x11e40000 0x1000>;
+			status = "disabled";
+
+			u2port0: usb2-phy0 at 0 {
+				reg = <0x0 0x700>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_REF>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				status = "okay";
+			};
+
+			u3port0: usb3-phy0 at 700 {
+				reg = <0x700 0 0x900>;
+				clocks = <&apmixedsys CLK_APMIXED_PLL_SSUSB26M>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				status = "okay";
+			};
+		};
+
 		pciephy: phy at 11e80000 {
 			compatible = "mediatek,mt8195-pcie-phy";
 			#address-cells = <2>;
-- 
2.18.0


More information about the Linux-mediatek mailing list