[PATCH v2] net: ethernet: mtk_eth_soc: implement Clause 45 MDIO access

[Daniel Golle]

Implement read and write access to IEEE 802.3 Clause 45 Ethernet
phy registers.
Tested on the Ubiquiti UniFi 6 LR access point featuring
MediaTek MT7622BV WiSoC with Aquantia AQR112C.

Signed-off-by: Daniel Golle <daniel at makrotopia.org>
---
v2: use MII_DEVADDR_C45_SHIFT and MII_REGADDR_C45_MASK to extract
    device id and register address. Unify read and write functions to
    have identical types and parameter names where possible as we are
    anyway already replacing both function bodies.

 drivers/net/ethernet/mediatek/mtk_eth_soc.c | 62 +++++++++++++++++----
 drivers/net/ethernet/mediatek/mtk_eth_soc.h |  3 +
 2 files changed, 54 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index bcb91b01e69f5..fdb1c7958e79c 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -94,18 +94,38 @@ static int mtk_mdio_busy_wait(struct mtk_eth *eth)
 	return -1;
 }
 
-static u32 _mtk_mdio_write(struct mtk_eth *eth, u32 phy_addr,
-			   u32 phy_register, u32 write_data)
+static u32 _mtk_mdio_write(struct mtk_eth *eth, u32 phy_addr, u32 phy_reg,
+			   u32 write_data)
 {
 	if (mtk_mdio_busy_wait(eth))
 		return -1;
 
 	write_data &= 0xffff;
 
-	mtk_w32(eth, PHY_IAC_ACCESS | PHY_IAC_START | PHY_IAC_WRITE |
-		(phy_register << PHY_IAC_REG_SHIFT) |
-		(phy_addr << PHY_IAC_ADDR_SHIFT) | write_data,
-		MTK_PHY_IAC);
+	if (phy_reg & MII_ADDR_C45) {
+		u8 dev_num = (phy_reg >> MII_DEVADDR_C45_SHIFT) & GENMASK(4, 0);
+		u16 reg = (u16)(phy_reg & MII_REGADDR_C45_MASK);
+
+		mtk_w32(eth, PHY_IAC_ACCESS | PHY_IAC_START_C45 | PHY_IAC_SET_ADDR |
+			(phy_addr << PHY_IAC_ADDR_SHIFT) |
+			(dev_num << PHY_IAC_REG_SHIFT) |
+			reg,
+			MTK_PHY_IAC);
+
+		if (mtk_mdio_busy_wait(eth))
+			return 0xffff;
+
+		mtk_w32(eth, PHY_IAC_ACCESS | PHY_IAC_START_C45 | PHY_IAC_WRITE |
+			(phy_addr << PHY_IAC_ADDR_SHIFT) |
+			(dev_num << PHY_IAC_REG_SHIFT) |
+			write_data,
+			MTK_PHY_IAC);
+	} else {
+		mtk_w32(eth, PHY_IAC_ACCESS | PHY_IAC_START | PHY_IAC_WRITE |
+			(phy_reg << PHY_IAC_REG_SHIFT) |
+			(phy_addr << PHY_IAC_ADDR_SHIFT) | write_data,
+			MTK_PHY_IAC);
+	}
 
 	if (mtk_mdio_busy_wait(eth))
 		return -1;
@@ -113,17 +133,36 @@ static u32 _mtk_mdio_write(struct mtk_eth *eth, u32 phy_addr,
 	return 0;
 }
 
-static u32 _mtk_mdio_read(struct mtk_eth *eth, int phy_addr, int phy_reg)
+static u32 _mtk_mdio_read(struct mtk_eth *eth, u32 phy_addr, u32 phy_reg)
 {
 	u32 d;
 
 	if (mtk_mdio_busy_wait(eth))
 		return 0xffff;
 
-	mtk_w32(eth, PHY_IAC_ACCESS | PHY_IAC_START | PHY_IAC_READ |
-		(phy_reg << PHY_IAC_REG_SHIFT) |
-		(phy_addr << PHY_IAC_ADDR_SHIFT),
-		MTK_PHY_IAC);
+	if (phy_reg & MII_ADDR_C45) {
+		u8 dev_num = (phy_reg >> MII_DEVADDR_C45_SHIFT) & GENMASK(4, 0);
+		u16 reg = (u16)(phy_reg & MII_REGADDR_C45_MASK);
+
+		mtk_w32(eth, PHY_IAC_ACCESS | PHY_IAC_START_C45 | PHY_IAC_SET_ADDR |
+			(phy_addr << PHY_IAC_ADDR_SHIFT) |
+			(dev_num << PHY_IAC_REG_SHIFT) |
+			reg,
+			MTK_PHY_IAC);
+
+		if (mtk_mdio_busy_wait(eth))
+			return 0xffff;
+
+		mtk_w32(eth, PHY_IAC_ACCESS | PHY_IAC_START_C45 | PHY_IAC_READ_C45 |
+			(phy_addr << PHY_IAC_ADDR_SHIFT) |
+			(dev_num << PHY_IAC_REG_SHIFT),
+			MTK_PHY_IAC);
+	} else {
+		mtk_w32(eth, PHY_IAC_ACCESS | PHY_IAC_START | PHY_IAC_READ |
+			(phy_reg << PHY_IAC_REG_SHIFT) |
+			(phy_addr << PHY_IAC_ADDR_SHIFT),
+			MTK_PHY_IAC);
+	}
 
 	if (mtk_mdio_busy_wait(eth))
 		return 0xffff;
@@ -497,6 +536,7 @@ static int mtk_mdio_init(struct mtk_eth *eth)
 	eth->mii_bus->name = "mdio";
 	eth->mii_bus->read = mtk_mdio_read;
 	eth->mii_bus->write = mtk_mdio_write;
+	eth->mii_bus->probe_capabilities = MDIOBUS_C22_C45;
 	eth->mii_bus->priv = eth;
 	eth->mii_bus->parent = eth->dev;
 
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
index 5ef70dd8b49c6..b73d8adc9d24c 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
@@ -341,9 +341,12 @@
 /* PHY Indirect Access Control registers */
 #define MTK_PHY_IAC		0x10004
 #define PHY_IAC_ACCESS		BIT(31)
+#define PHY_IAC_SET_ADDR	0
 #define PHY_IAC_READ		BIT(19)
+#define PHY_IAC_READ_C45	(BIT(18) | BIT(19))
 #define PHY_IAC_WRITE		BIT(18)
 #define PHY_IAC_START		BIT(16)
+#define PHY_IAC_START_C45	0
 #define PHY_IAC_ADDR_SHIFT	20
 #define PHY_IAC_REG_SHIFT	25
 #define PHY_IAC_TIMEOUT		HZ
-- 
2.34.1