[PATCH v16 4/7] soc: mediatek: SVS: add debug commands

[Roger Lu]

Hi AngeloGioacchino,

Sorry for the late reply.

On Thu, 2021-10-21 at 10:52 +0200, AngeloGioacchino Del Regno wrote:
> Il 28/04/21 08:54, Roger Lu ha scritto:
> > The purpose of SVS is to help find the suitable voltages
> > for DVFS. Therefore, if SVS bank voltages are concerned
> > to be wrong, we can adjust SVS bank voltages by this patch.
> > 
> > Signed-off-by: Roger Lu <roger.lu at mediatek.com>
> > ---
> >   drivers/soc/mediatek/mtk-svs.c | 328 +++++++++++++++++++++++++++++++++
> >   1 file changed, 328 insertions(+)
> > 
> > diff --git a/drivers/soc/mediatek/mtk-svs.c b/drivers/soc/mediatek/mtk-svs.c
> > index 2d2153c92373..8794a2d87baa 100644
> > --- a/drivers/soc/mediatek/mtk-svs.c
> > +++ b/drivers/soc/mediatek/mtk-svs.c
> > @@ -6,6 +6,7 @@
> >   #include <linux/bits.h>
> >   #include <linux/clk.h>
> >   #include <linux/completion.h>
> > +#include <linux/debugfs.h>
> >   #include <linux/device.h>
> >   #include <linux/init.h>
> >   #include <linux/interrupt.h>
> > @@ -24,6 +25,7 @@
> >   #include <linux/pm_runtime.h>
> >   #include <linux/regulator/consumer.h>
> >   #include <linux/reset.h>
> > +#include <linux/seq_file.h>
> >   #include <linux/slab.h>
> >   #include <linux/spinlock.h>
> >   #include <linux/thermal.h>
> > @@ -62,6 +64,39 @@
> >   #define SVSB_INTSTS_COMPLETE		0x1
> >   #define SVSB_INTSTS_CLEAN		0x00ffffff
> >   
> > +#define debug_fops_ro(name)						
> > \
> > +	static int svs_##name##_debug_open(struct inode *inode,		\
> > +					   struct file *filp)		\
> > +	{								\
> > +		return single_open(filp, svs_##name##_debug_show,	\
> > +				   inode->i_private);			\
> > +	}								\
> > +	static const struct file_operations svs_##name##_debug_fops = {	\
> > +		.owner = THIS_MODULE,					\
> > +		.open = svs_##name##_debug_open,			\
> > +		.read = seq_read,					\
> > +		.llseek = seq_lseek,					\
> > +		.release = single_release,				\
> > +	}
> > +
> > +#define debug_fops_rw(name)						
> > \
> > +	static int svs_##name##_debug_open(struct inode *inode,		\
> > +					   struct file *filp)		\
> > +	{								\
> > +		return single_open(filp, svs_##name##_debug_show,	\
> > +				   inode->i_private);			\
> > +	}								\
> > +	static const struct file_operations svs_##name##_debug_fops = {	\
> > +		.owner = THIS_MODULE,					\
> > +		.open = svs_##name##_debug_open,			\
> > +		.read = seq_read,					\
> > +		.write = svs_##name##_debug_write,			\
> > +		.llseek = seq_lseek,					\
> > +		.release = single_release,				\
> > +	}
> > +
> > +#define svs_dentry(name)	{__stringify(name), &svs_##name##_debug_fops}
> > +
> >   static DEFINE_SPINLOCK(mtk_svs_lock);
> >   
> >   /*
> > @@ -83,6 +118,7 @@ enum svsb_phase {
> >   	SVSB_PHASE_INIT01,
> >   	SVSB_PHASE_INIT02,
> >   	SVSB_PHASE_MON,
> > +	SVSB_PHASE_NUM,
> 
> I would move the addition of these last members in the previous (3/7) patch,
> where you introduce the driver in the first place.
> 
> Also, I think that using _MAX instead would be better, as it is pretty
> much a common practice. So, this would become SVSB_PHASE_MAX.

Okay. I'll move it to previous (3/7) patch. Thanks for advice.

> 
> >   };
> >   
> >   enum svs_reg_index {
> > @@ -140,6 +176,7 @@ enum svs_reg_index {
> >   	SPARE2,
> >   	SPARE3,
> >   	THSLPEVEB,
> > +	SVS_REG_NUM,
> 
> ... and this would become SVS_REG_MAX

Okay. I'll move it to previous (3/7) patch. Thanks for advice.

> 
> >   };
> >   
> >   static const u32 svs_regs_v2[] = {
> 
> Apart from that,
> 
> Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
>