[PATCH v2 4/5] phy: phy-mtk-xsphy: use new io helpers to access register
Chunfeng Yun
chunfeng.yun at mediatek.com
Sat Dec 18 00:28:01 PST 2021
Use new helpers mtk_phy_clear/set/update_bits() to access registers
Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
---
v2: new patch
---
drivers/phy/mediatek/phy-mtk-xsphy.c | 140 +++++++++------------------
1 file changed, 46 insertions(+), 94 deletions(-)
diff --git a/drivers/phy/mediatek/phy-mtk-xsphy.c b/drivers/phy/mediatek/phy-mtk-xsphy.c
index 8c51131945c0..c0cdb78f77fa 100644
--- a/drivers/phy/mediatek/phy-mtk-xsphy.c
+++ b/drivers/phy/mediatek/phy-mtk-xsphy.c
@@ -10,13 +10,14 @@
#include <dt-bindings/phy/phy.h>
#include <linux/clk.h>
#include <linux/delay.h>
-#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include "phy-mtk-io.h"
+
/* u2 phy banks */
#define SSUSB_SIFSLV_MISC 0x000
#define SSUSB_SIFSLV_U2FREQ 0x100
@@ -126,26 +127,18 @@ static void u2_phy_slew_rate_calibrate(struct mtk_xsphy *xsphy,
return;
/* enable USB ring oscillator */
- tmp = readl(pbase + XSP_USBPHYACR5);
- tmp |= P2A5_RG_HSTX_SRCAL_EN;
- writel(tmp, pbase + XSP_USBPHYACR5);
+ mtk_phy_set_bits(pbase + XSP_USBPHYACR5, P2A5_RG_HSTX_SRCAL_EN);
udelay(1); /* wait clock stable */
/* enable free run clock */
- tmp = readl(pbase + XSP_U2FREQ_FMMONR1);
- tmp |= P2F_RG_FRCK_EN;
- writel(tmp, pbase + XSP_U2FREQ_FMMONR1);
+ mtk_phy_set_bits(pbase + XSP_U2FREQ_FMMONR1, P2F_RG_FRCK_EN);
/* set cycle count as 1024 */
- tmp = readl(pbase + XSP_U2FREQ_FMCR0);
- tmp &= ~(P2F_RG_CYCLECNT);
- tmp |= P2F_RG_CYCLECNT_VAL(XSP_FM_DET_CYCLE_CNT);
- writel(tmp, pbase + XSP_U2FREQ_FMCR0);
+ mtk_phy_update_bits(pbase + XSP_U2FREQ_FMCR0, P2F_RG_CYCLECNT,
+ P2F_RG_CYCLECNT_VAL(XSP_FM_DET_CYCLE_CNT));
/* enable frequency meter */
- tmp = readl(pbase + XSP_U2FREQ_FMCR0);
- tmp |= P2F_RG_FREQDET_EN;
- writel(tmp, pbase + XSP_U2FREQ_FMCR0);
+ mtk_phy_set_bits(pbase + XSP_U2FREQ_FMCR0, P2F_RG_FREQDET_EN);
/* ignore return value */
readl_poll_timeout(pbase + XSP_U2FREQ_FMMONR1, tmp,
@@ -154,14 +147,10 @@ static void u2_phy_slew_rate_calibrate(struct mtk_xsphy *xsphy,
fm_out = readl(pbase + XSP_U2FREQ_MMONR0);
/* disable frequency meter */
- tmp = readl(pbase + XSP_U2FREQ_FMCR0);
- tmp &= ~P2F_RG_FREQDET_EN;
- writel(tmp, pbase + XSP_U2FREQ_FMCR0);
+ mtk_phy_clear_bits(pbase + XSP_U2FREQ_FMCR0, P2F_RG_FREQDET_EN);
/* disable free run clock */
- tmp = readl(pbase + XSP_U2FREQ_FMMONR1);
- tmp &= ~P2F_RG_FRCK_EN;
- writel(tmp, pbase + XSP_U2FREQ_FMMONR1);
+ mtk_phy_clear_bits(pbase + XSP_U2FREQ_FMMONR1, P2F_RG_FRCK_EN);
if (fm_out) {
/* (1024 / FM_OUT) x reference clock frequency x coefficient */
@@ -177,31 +166,22 @@ static void u2_phy_slew_rate_calibrate(struct mtk_xsphy *xsphy,
xsphy->src_ref_clk, xsphy->src_coef);
/* set HS slew rate */
- tmp = readl(pbase + XSP_USBPHYACR5);
- tmp &= ~P2A5_RG_HSTX_SRCTRL;
- tmp |= P2A5_RG_HSTX_SRCTRL_VAL(calib_val);
- writel(tmp, pbase + XSP_USBPHYACR5);
+ mtk_phy_update_bits(pbase + XSP_USBPHYACR5, P2A5_RG_HSTX_SRCTRL,
+ P2A5_RG_HSTX_SRCTRL_VAL(calib_val));
/* disable USB ring oscillator */
- tmp = readl(pbase + XSP_USBPHYACR5);
- tmp &= ~P2A5_RG_HSTX_SRCAL_EN;
- writel(tmp, pbase + XSP_USBPHYACR5);
+ mtk_phy_clear_bits(pbase + XSP_USBPHYACR5, P2A5_RG_HSTX_SRCAL_EN);
}
static void u2_phy_instance_init(struct mtk_xsphy *xsphy,
struct xsphy_instance *inst)
{
void __iomem *pbase = inst->port_base;
- u32 tmp;
/* DP/DM BC1.1 path Disable */
- tmp = readl(pbase + XSP_USBPHYACR6);
- tmp &= ~P2A6_RG_BC11_SW_EN;
- writel(tmp, pbase + XSP_USBPHYACR6);
+ mtk_phy_clear_bits(pbase + XSP_USBPHYACR6, P2A6_RG_BC11_SW_EN);
- tmp = readl(pbase + XSP_USBPHYACR0);
- tmp |= P2A0_RG_INTR_EN;
- writel(tmp, pbase + XSP_USBPHYACR0);
+ mtk_phy_set_bits(pbase + XSP_USBPHYACR0, P2A0_RG_INTR_EN);
}
static void u2_phy_instance_power_on(struct mtk_xsphy *xsphy,
@@ -209,16 +189,12 @@ static void u2_phy_instance_power_on(struct mtk_xsphy *xsphy,
{
void __iomem *pbase = inst->port_base;
u32 index = inst->index;
- u32 tmp;
- tmp = readl(pbase + XSP_USBPHYACR6);
- tmp |= P2A6_RG_OTG_VBUSCMP_EN;
- writel(tmp, pbase + XSP_USBPHYACR6);
+ mtk_phy_set_bits(pbase + XSP_USBPHYACR6, P2A6_RG_OTG_VBUSCMP_EN);
- tmp = readl(pbase + XSP_U2PHYDTM1);
- tmp |= P2D_RG_VBUSVALID | P2D_RG_AVALID;
- tmp &= ~P2D_RG_SESSEND;
- writel(tmp, pbase + XSP_U2PHYDTM1);
+ mtk_phy_update_bits(pbase + XSP_U2PHYDTM1,
+ P2D_RG_VBUSVALID | P2D_RG_AVALID | P2D_RG_SESSEND,
+ P2D_RG_VBUSVALID | P2D_RG_AVALID);
dev_dbg(xsphy->dev, "%s(%d)\n", __func__, index);
}
@@ -228,16 +204,12 @@ static void u2_phy_instance_power_off(struct mtk_xsphy *xsphy,
{
void __iomem *pbase = inst->port_base;
u32 index = inst->index;
- u32 tmp;
- tmp = readl(pbase + XSP_USBPHYACR6);
- tmp &= ~P2A6_RG_OTG_VBUSCMP_EN;
- writel(tmp, pbase + XSP_USBPHYACR6);
+ mtk_phy_clear_bits(pbase + XSP_USBPHYACR6, P2A6_RG_OTG_VBUSCMP_EN);
- tmp = readl(pbase + XSP_U2PHYDTM1);
- tmp &= ~(P2D_RG_VBUSVALID | P2D_RG_AVALID);
- tmp |= P2D_RG_SESSEND;
- writel(tmp, pbase + XSP_U2PHYDTM1);
+ mtk_phy_update_bits(pbase + XSP_U2PHYDTM1,
+ P2D_RG_VBUSVALID | P2D_RG_AVALID | P2D_RG_SESSEND,
+ P2D_RG_SESSEND);
dev_dbg(xsphy->dev, "%s(%d)\n", __func__, index);
}
@@ -306,63 +278,43 @@ static void u2_phy_props_set(struct mtk_xsphy *xsphy,
struct xsphy_instance *inst)
{
void __iomem *pbase = inst->port_base;
- u32 tmp;
- if (inst->efuse_intr) {
- tmp = readl(pbase + XSP_USBPHYACR1);
- tmp &= ~P2A1_RG_INTR_CAL;
- tmp |= P2A1_RG_INTR_CAL_VAL(inst->efuse_intr);
- writel(tmp, pbase + XSP_USBPHYACR1);
- }
+ if (inst->efuse_intr)
+ mtk_phy_update_bits(pbase + XSP_USBPHYACR1, P2A1_RG_INTR_CAL,
+ P2A1_RG_INTR_CAL_VAL(inst->efuse_intr));
- if (inst->eye_src) {
- tmp = readl(pbase + XSP_USBPHYACR5);
- tmp &= ~P2A5_RG_HSTX_SRCTRL;
- tmp |= P2A5_RG_HSTX_SRCTRL_VAL(inst->eye_src);
- writel(tmp, pbase + XSP_USBPHYACR5);
- }
+ if (inst->eye_src)
+ mtk_phy_update_bits(pbase + XSP_USBPHYACR5, P2A5_RG_HSTX_SRCTRL,
+ P2A5_RG_HSTX_SRCTRL_VAL(inst->eye_src));
- if (inst->eye_vrt) {
- tmp = readl(pbase + XSP_USBPHYACR1);
- tmp &= ~P2A1_RG_VRT_SEL;
- tmp |= P2A1_RG_VRT_SEL_VAL(inst->eye_vrt);
- writel(tmp, pbase + XSP_USBPHYACR1);
- }
+ if (inst->eye_vrt)
+ mtk_phy_update_bits(pbase + XSP_USBPHYACR1, P2A1_RG_VRT_SEL,
+ P2A1_RG_VRT_SEL_VAL(inst->eye_vrt));
- if (inst->eye_term) {
- tmp = readl(pbase + XSP_USBPHYACR1);
- tmp &= ~P2A1_RG_TERM_SEL;
- tmp |= P2A1_RG_TERM_SEL_VAL(inst->eye_term);
- writel(tmp, pbase + XSP_USBPHYACR1);
- }
+ if (inst->eye_term)
+ mtk_phy_update_bits(pbase + XSP_USBPHYACR1, P2A1_RG_TERM_SEL,
+ P2A1_RG_TERM_SEL_VAL(inst->eye_term));
}
static void u3_phy_props_set(struct mtk_xsphy *xsphy,
struct xsphy_instance *inst)
{
void __iomem *pbase = inst->port_base;
- u32 tmp;
- if (inst->efuse_intr) {
- tmp = readl(xsphy->glb_base + SSPXTP_PHYA_GLB_00);
- tmp &= ~RG_XTP_GLB_BIAS_INTR_CTRL;
- tmp |= RG_XTP_GLB_BIAS_INTR_CTRL_VAL(inst->efuse_intr);
- writel(tmp, xsphy->glb_base + SSPXTP_PHYA_GLB_00);
- }
+ if (inst->efuse_intr)
+ mtk_phy_update_bits(xsphy->glb_base + SSPXTP_PHYA_GLB_00,
+ RG_XTP_GLB_BIAS_INTR_CTRL,
+ RG_XTP_GLB_BIAS_INTR_CTRL_VAL(inst->efuse_intr));
- if (inst->efuse_tx_imp) {
- tmp = readl(pbase + SSPXTP_PHYA_LN_04);
- tmp &= ~RG_XTP_LN0_TX_IMPSEL;
- tmp |= RG_XTP_LN0_TX_IMPSEL_VAL(inst->efuse_tx_imp);
- writel(tmp, pbase + SSPXTP_PHYA_LN_04);
- }
+ if (inst->efuse_tx_imp)
+ mtk_phy_update_bits(pbase + SSPXTP_PHYA_LN_04,
+ RG_XTP_LN0_TX_IMPSEL,
+ RG_XTP_LN0_TX_IMPSEL_VAL(inst->efuse_tx_imp));
- if (inst->efuse_rx_imp) {
- tmp = readl(pbase + SSPXTP_PHYA_LN_14);
- tmp &= ~RG_XTP_LN0_RX_IMPSEL;
- tmp |= RG_XTP_LN0_RX_IMPSEL_VAL(inst->efuse_rx_imp);
- writel(tmp, pbase + SSPXTP_PHYA_LN_14);
- }
+ if (inst->efuse_rx_imp)
+ mtk_phy_update_bits(pbase + SSPXTP_PHYA_LN_14,
+ RG_XTP_LN0_RX_IMPSEL,
+ RG_XTP_LN0_RX_IMPSEL_VAL(inst->efuse_rx_imp));
}
static int mtk_phy_init(struct phy *phy)
--
2.18.0
More information about the Linux-mediatek
mailing list