[PATCH] linux-firmware: update firmware for MT7921 WiFi device
Sven Eckelmann
sven at narfation.org
Thu Dec 9 01:21:02 PST 2021
On Thursday, 9 December 2021 09:24:11 CET Deren Wu wrote:
> From: Deren Wu <deren.wu at mediatek.com>
>
> Update binary firmware for MT7921 WiFi devices
>
> File: mediatek/WIFI_MT7961_patch_mcu_1_2_hdr.bin
> Version: 20211129210838a
> File: mediatek/WIFI_RAM_CODE_MT7961_1.bin
> Version: 20211129210917
Thank you for the firmware update. With this firmware and the mt76.git
commit 678071ef7029 ("mt76: mt7615: clear mcu error interrupt status on
mt7663") + hostapd commit 14ab4a816c68 ("Reject ap_vendor_elements if
its length is odd") , I was able to connect to an 6GHz AP:
$ cat > station_sae_test.conf << "EOF"
country=US
network={
scan_ssid=1
ssid="Maverick6g"
key_mgmt=SAE
psk="testtest"
proto=RSN
ieee80211w=2
beacon_int=100
}
EOF
$ ip link set up dev wlp5s0
$ ./wpa_supplicant -D nl80211 -i wlp6s0 -c ~/station_sae_test.cfg -B
$ iw dev wlp5s0 link
Connected to 00:03:7f:12:8c:8c (on wlp5s0)
SSID: Maverick6g
freq: 6115
RX: 3092674 bytes (26805 packets)
TX: 114756 bytes (1073 packets)
signal: -49 dBm
rx bitrate: 1080.6 MBit/s 80MHz HE-MCS 10 HE-NSS 2 HE-GI 0 HE-DCM 0
tx bitrate: 6.5 MBit/s MCS 0
bss flags: short-slot-time
dtim period: 2
beacon int: 100
$ ping ff02::1%wlp5s0
....
Just as note: It is still not possible to see beacons when using the card in
monitor mode.
Tested-by: Sven Eckelmann <sven at narfation.org>
Kind regards,
Svem
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.infradead.org/pipermail/linux-mediatek/attachments/20211209/2610b09b/attachment.sig>
More information about the Linux-mediatek
mailing list