[PATCH] arm: dts: mt7623: add otg nodes for bpi-r2

Frank Wunderlich linux at fw-web.de
Mon Aug 30 07:14:15 PDT 2021


From: Frank Wunderlich <frank-w at public-files.de>

Add OTG-Nodes for BananaPi-R2

Signed-off-by: Frank Wunderlich <frank-w at public-files.de>
---
patch is based on

"arm: dts: mt7623: add musb device nodes"

https://patchwork.kernel.org/project/linux-mediatek/patch/20210822041333.5264-2-mans0n@gorani.run/
---
 arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 25 +++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
index 8d22aeec91e1..729bc055ffcd 100644
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -374,7 +374,14 @@ adie {
 				bias-disable;
 		};
 	};
+
+	musb_pins: musb {
+		pins-musb {
+			pinmux = <MT7623_PIN_237_EXT_SDIO2_FUNC_DRV_VBUS>;
+		};
+	};
 };
+
 &consys {
 	mediatek,pwrap-regmap = <&pwrap>;
 	pinctrl-names = "default";
@@ -462,3 +469,21 @@ &u3phy1 {
 &u3phy2 {
 	status = "okay";
 };
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&musb_pins>;
+	status = "okay";
+	usb-role-switch;
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		id-gpios = <&pio 44 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
-- 
2.25.1




More information about the Linux-mediatek mailing list