[PATCH net-next] net: dsa: mt7530: manually set up VLAN ID 0

[Vladimir Oltean]

On Wed, Aug 25, 2021 at 01:32:37AM +0800, DENG Qingfang wrote:
> On Tue, Aug 24, 2021 at 07:57:42PM +0300, Vladimir Oltean wrote:
> > I understand that this is how you noticed the issue, but please remember
> > that one can always compile a kernel with CONFIG_VLAN_8021Q=n. So the
> > issue predates my patch by much longer. You might reconsider the Fixes:
> > tag in light of this, maybe the patch needs to be sent to stable.
>
> Okay. So the Fixes tag should be 6087175b7991, which initially adds the
> software fallback support for mt7530.

Ok. Did the old code not need VLAN 0 for VLAN-unaware ports, or are you
saying that since the VLAN table lookup was bypassed completely in the
old code, 'no VLAN 0' was an inconsequential error?

I think it's the latter. Just wanted to make sure. So that means, either
this Fixes: tag or the other, the patch still belongs to net-next. From
my side you shouldn't need to resend.

Reviewed-by: Vladimir Oltean <olteanv at gmail.com>

> > > +static int
> > > +mt7530_setup_vlan0(struct mt7530_priv *priv)
> > > +{
> > > +	u32 val;
> > > +
> > > +	/* Validate the entry with independent learning, keep the original
> > > +	 * ingress tag attribute.
> > > +	 */
> > > +	val = IVL_MAC | EG_CON | PORT_MEM(MT7530_ALL_MEMBERS) | FID(FID_BRIDGED) |
> >
> > FID_BRIDGED?
>
> What's wrong with that?

Nothing, I had a senior moment and I forgot how mt7530 sets up things.