[v2 07/24] clk: mediatek: Add MT8195 topckgen clock support
Chen-Yu Tsai
wenst at chromium.org
Mon Aug 23 04:16:56 PDT 2021
On Fri, Aug 20, 2021 at 7:20 PM Chun-Jie Chen
<chun-jie.chen at mediatek.com> wrote:
>
> Add MT8195 topckgen clock controller which provides muxes, dividers
> to handle variety clock selection in other IP blocks.
>
> Signed-off-by: Chun-Jie Chen <chun-jie.chen at mediatek.com>
> ---
> The changes as follow:
> 1. remove 1 on 1 divider
> 2. merge parent source data in muxes
> 3. add some comment if the clock is not model by CCF or has special flag
> 4. remove _SEL suffix in clock name
> ---
> drivers/clk/mediatek/Makefile | 2 +-
> drivers/clk/mediatek/clk-mt8195-topckgen.c | 1298 ++++++++++++++++++++
> 2 files changed, 1299 insertions(+), 1 deletion(-)
> create mode 100644 drivers/clk/mediatek/clk-mt8195-topckgen.c
>
> diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile
> index d4157cfca865..a142342a0cea 100644
> --- a/drivers/clk/mediatek/Makefile
> +++ b/drivers/clk/mediatek/Makefile
> @@ -80,6 +80,6 @@ obj-$(CONFIG_COMMON_CLK_MT8192_MSDC) += clk-mt8192-msdc.o
> obj-$(CONFIG_COMMON_CLK_MT8192_SCP_ADSP) += clk-mt8192-scp_adsp.o
> obj-$(CONFIG_COMMON_CLK_MT8192_VDECSYS) += clk-mt8192-vdec.o
> obj-$(CONFIG_COMMON_CLK_MT8192_VENCSYS) += clk-mt8192-venc.o
> -obj-$(CONFIG_COMMON_CLK_MT8195) += clk-mt8195-apmixedsys.o
> +obj-$(CONFIG_COMMON_CLK_MT8195) += clk-mt8195-apmixedsys.o clk-mt8195-topckgen.o
> obj-$(CONFIG_COMMON_CLK_MT8516) += clk-mt8516.o
> obj-$(CONFIG_COMMON_CLK_MT8516_AUDSYS) += clk-mt8516-aud.o
> diff --git a/drivers/clk/mediatek/clk-mt8195-topckgen.c b/drivers/clk/mediatek/clk-mt8195-topckgen.c
> new file mode 100644
> index 000000000000..3cf113544f59
> --- /dev/null
> +++ b/drivers/clk/mediatek/clk-mt8195-topckgen.c
> @@ -0,0 +1,1298 @@
[...]
> +static const char * const dsp_parents[] = {
> + "clk26m",
> + "univpll_d6_d2",
> + "univpll_d4_d2",
> + "univpll_d5",
> + "univpll_d4",
> + "mmpll_d4",
> + "mainpll_d3",
> + "univpll_d3"
> +};
> +
> +static const char * const dsp1_parents[] = {
> + "clk26m",
> + "univpll_d6_d2",
> + "mainpll_d4_d2",
> + "univpll_d5",
> + "mmpll_d5",
> + "univpll_d4",
> + "mainpll_d3",
> + "univpll_d3"
> +};
> +
> +static const char * const dsp2_parents[] = {
> + "clk26m",
> + "univpll_d6_d2",
> + "univpll_d4_d2",
> + "mainpll_d4",
> + "univpll_d4",
> + "mmpll_d4",
> + "mainpll_d3",
> + "univpll_d3"
> +};
> +
> +static const char * const dsp3_parents[] = {
> + "clk26m",
> + "univpll_d6_d2",
> + "univpll_d4_d2",
> + "univpll_d5",
> + "univpll_d4",
> + "mmpll_d4",
> + "mainpll_d3",
> + "univpll_d3"
> +};
dsp3_parents looks like it matches dsp_parents. If so, please deduplicate.
[...]
> +static const struct mtk_mux top_mtk_muxes[] = {
[...]
> + /* CLK_CFG_29 */
> + MUX_GATE_CLR_SET_UPD(CLK_TOP_DVIO_DGI_REF, "top_dvio_dgi_ref",
> + dvio_dgi_ref_parents, 0x017C, 0x0180, 0x0184, 0, 3, 7, 0x010, 20),
> + MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_ULPOSC, "top_ulposc",
> + ulposc_parents, 0x017C, 0x0180, 0x0184, 8, 2, 15, 0x010, 21, CLK_IS_CRITICAL),
> + MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_ULPOSC_CORE, "top_ulposc_core",
> + ulposc_core_parents, 0x017C, 0x0180, 0x0184, 16, 2, 23, 0x010, 22, CLK_IS_CRITICAL),
> + MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_SRCK, "top_srck",
> + srck_parents, 0x017C, 0x0180, 0x0184, 24, 1, 31, 0x010, 23, CLK_IS_CRITICAL),
Any comments regarding the three critical clocks?
> + /*
> + * the clocks in CLK_CFG_30 ~ 37 are backup clock source, no need to handled
> + * by Linux.
> + */
> +};
> +
> +static struct mtk_composite top_muxes[] = {
> + /* CLK_MISC_CFG_3 */
> + MUX(CLK_TOP_MFG_CK_FAST_REF, "mfg_ck_fast_ref", mfg_fast_parents, 0x0250, 8, 1),
> +};
> +
> +/*
> + * apll12_div5 ~ 9 are not used in MT8195.
> + */
> +static const struct mtk_composite top_adj_divs[] = {
> + DIV_GATE(CLK_TOP_APLL12_DIV0, "apll12_div0", "top_i2si1_mck", 0x0320, 0, 0x0328, 8, 0),
> + DIV_GATE(CLK_TOP_APLL12_DIV1, "apll12_div1", "top_i2si2_mck", 0x0320, 1, 0x0328, 8, 8),
> + DIV_GATE(CLK_TOP_APLL12_DIV2, "apll12_div2", "top_i2so1_mck", 0x0320, 2, 0x0328, 8, 16),
> + DIV_GATE(CLK_TOP_APLL12_DIV3, "apll12_div3", "top_i2so2_mck", 0x0320, 3, 0x0328, 8, 24),
> + DIV_GATE(CLK_TOP_APLL12_DIV4, "apll12_div4", "top_aud_iec_clk", 0x0320, 4, 0x0334, 8, 0),
The comment could be inlined here directly:
/* apll12_div5 ~ 9 are not used in MT8195 */
> + DIV_GATE(CLK_TOP_APLL12_DIV9, "apll12_div9", "top_dptx_mck", 0x0320, 9, 0x0338, 8, 8),
> +};
> +
> +static const struct mtk_gate_regs top0_cg_regs = {
> + .set_ofs = 0x238,
> + .clr_ofs = 0x238,
> + .sta_ofs = 0x238,
> +};
> +
> +static const struct mtk_gate_regs top1_cg_regs = {
> + .set_ofs = 0x250,
> + .clr_ofs = 0x250,
> + .sta_ofs = 0x250,
> +};
> +
> +#define GATE_TOP0_FLAGS(_id, _name, _parent, _shift, _flag) \
> + GATE_MTK_FLAGS(_id, _name, _parent, &top0_cg_regs, _shift, \
> + &mtk_clk_gate_ops_no_setclr_inv, _flag)
> +
> +#define GATE_TOP0(_id, _name, _parent, _shift) \
> + GATE_TOP0_FLAGS(_id, _name, _parent, _shift, 0)
> +
> +#define GATE_TOP1(_id, _name, _parent, _shift) \
> + GATE_MTK(_id, _name, _parent, &top1_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr_inv)
> +
> +/*
> + * cfg_axi_east, cfg_axi_east_north, cfg_axi_north and cfg_axi_south
> + * are peripheral bus clock branches.
> + */
> +static const struct mtk_gate top_clks[] = {
> + /* TOP0 */
> + GATE_TOP0(CLK_TOP_CFG_VPP0, "cfg_vpp0", "top_vpp", 0),
> + GATE_TOP0(CLK_TOP_CFG_VPP1, "cfg_vpp1", "top_vpp", 1),
> + GATE_TOP0(CLK_TOP_CFG_VDO0, "cfg_vdo0", "top_vpp", 2),
> + GATE_TOP0(CLK_TOP_CFG_VDO1, "cfg_vdo1", "top_vpp", 3),
> + GATE_TOP0(CLK_TOP_CFG_UNIPLL_SES, "cfg_unipll_ses", "univpll_d2", 4),
> + GATE_TOP0(CLK_TOP_CFG_26M_VPP0, "cfg_26m_vpp0", "clk26m", 5),
> + GATE_TOP0(CLK_TOP_CFG_26M_VPP1, "cfg_26m_vpp1", "clk26m", 6),
> + GATE_TOP0(CLK_TOP_CFG_26M_AUD, "cfg_26m_aud", "clk26m", 9),
> + GATE_TOP0_FLAGS(CLK_TOP_CFG_AXI_EAST, "cfg_axi_east", "top_axi", 10, CLK_IS_CRITICAL),
> + GATE_TOP0_FLAGS(CLK_TOP_CFG_AXI_EAST_NORTH, "cfg_axi_east_north", "top_axi", 11,
> + CLK_IS_CRITICAL),
> + GATE_TOP0_FLAGS(CLK_TOP_CFG_AXI_NORTH, "cfg_axi_north", "top_axi", 12, CLK_IS_CRITICAL),
> + GATE_TOP0_FLAGS(CLK_TOP_CFG_AXI_SOUTH, "cfg_axi_south", "top_axi", 13, CLK_IS_CRITICAL),
> + GATE_TOP0(CLK_TOP_CFG_EXT_TEST, "cfg_ext_test", "msdcpll_d2", 15),
> + /* TOP1 */
> + GATE_TOP1(CLK_TOP_SSUSB_REF, "ssusb_ref", "clk26m", 0),
> + GATE_TOP1(CLK_TOP_SSUSB_PHY_REF, "ssusb_phy_ref", "clk26m", 1),
> + GATE_TOP1(CLK_TOP_SSUSB_P1_REF, "ssusb_p1_ref", "clk26m", 2),
> + GATE_TOP1(CLK_TOP_SSUSB_PHY_P1_REF, "ssusb_phy_p1_ref", "clk26m", 3),
> + GATE_TOP1(CLK_TOP_SSUSB_P2_REF, "ssusb_p2_ref", "clk26m", 4),
> + GATE_TOP1(CLK_TOP_SSUSB_PHY_P2_REF, "ssusb_phy_p2_ref", "clk26m", 5),
> + GATE_TOP1(CLK_TOP_SSUSB_P3_REF, "ssusb_p3_ref", "clk26m", 6),
> + GATE_TOP1(CLK_TOP_SSUSB_PHY_P3_REF, "ssusb_phy_p3_ref", "clk26m", 7),
> +};
> +
> +static struct clk_onecell_data *top_clk_data;
> +
> +static void clk_mt8195_top_init_early(struct device_node *node)
> +{
> + int i;
> +
> + top_clk_data = mtk_alloc_clk_data(CLK_TOP_NR_CLK);
> + if (!top_clk_data)
> + return;
> +
> + for (i = 0; i < CLK_TOP_NR_CLK; i++)
> + top_clk_data->clks[i] = ERR_PTR(-EPROBE_DEFER);
> +
> + mtk_clk_register_factors(top_early_divs, ARRAY_SIZE(top_early_divs), top_clk_data);
It's still not clear to me why this is needed...
> +
> + if (of_clk_add_provider(node, of_clk_src_onecell_get, top_clk_data)) {
> + mtk_free_clk_data(top_clk_data);
> + top_clk_data = NULL;
> + }
> +}
> +
> +CLK_OF_DECLARE_DRIVER(mt8195_topckgen, "mediatek,mt8195-topckgen",
> + clk_mt8195_top_init_early);
> +
> +static const struct of_device_id of_match_clk_mt8195_topck[] = {
> + { .compatible = "mediatek,mt8195-topckgen", },
> + {}
> +};
> +
> +static int clk_mt8195_topck_probe(struct platform_device *pdev)
> +{
> + struct device_node *node = pdev->dev.of_node;
> + int r;
> + void __iomem *base;
> +
> + if (!top_clk_data)
> + return -EFAULT;
-ENODEV is more appropriate. -EFAULT signals a bad address (access).
See include/uapi/asm-generic/errno-base.h
> +
> + base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(base))
> + return PTR_ERR(base);
> +
> + mtk_clk_register_fixed_clks(top_fixed_clks, ARRAY_SIZE(top_fixed_clks),
> + top_clk_data);
> + mtk_clk_register_factors(top_early_divs, ARRAY_SIZE(top_early_divs), top_clk_data);
And this second invocation will fail because the same clocks have already
been registered. It seems like this invocation is enough to have "clk26m_d2"
registered before all of its children.
If so then CLK_OF_DECLARE_DRIVER is not necessary, that part could be
dropped, and the clk_data initialization moved into this probe function.
And `top_early_divs` could be merged with `top_divs`.
> + mtk_clk_register_factors(top_divs, ARRAY_SIZE(top_divs), top_clk_data);
> + mtk_clk_register_muxes(top_mtk_muxes, ARRAY_SIZE(top_mtk_muxes), node,
> + &mt8195_clk_lock, top_clk_data);
> + mtk_clk_register_composites(top_muxes, ARRAY_SIZE(top_muxes), base,
> + &mt8195_clk_lock, top_clk_data);
> + mtk_clk_register_composites(top_adj_divs, ARRAY_SIZE(top_adj_divs), base,
> + &mt8195_clk_lock, top_clk_data);
Please align wrapped lines with the opening parenthesis.
Regards
ChenYu
> + r = mtk_clk_register_gates(node, top_clks, ARRAY_SIZE(top_clks), top_clk_data);
> + if (r)
> + return r;
> +
> + return of_clk_add_provider(node, of_clk_src_onecell_get, top_clk_data);
> +}
> +
> +static struct platform_driver clk_mt8195_topck_drv = {
> + .probe = clk_mt8195_topck_probe,
> + .driver = {
> + .name = "clk-mt8195-topck",
> + .of_match_table = of_match_clk_mt8195_topck,
> + },
> +};
> +builtin_platform_driver(clk_mt8195_topck_drv);
> --
> 2.18.0
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek
More information about the Linux-mediatek
mailing list