[PATCH v2 2/7] usb: mtu3: use @mult for HS isoc or intr

[Chunfeng Yun]

For HS isoc or intr, should use @mult but not @burst
to save mult value.

Fixes: 4d79e042ed8b ("usb: mtu3: add support for usb3.1 IP")
Cc: stable <stable at vger.kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
---
v2: new patch, split from [2/6] suggested by Felipe
---
 drivers/usb/mtu3/mtu3_gadget.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/mtu3/mtu3_gadget.c b/drivers/usb/mtu3/mtu3_gadget.c
index 5e21ba05ebf0..635ad277cb13 100644
--- a/drivers/usb/mtu3/mtu3_gadget.c
+++ b/drivers/usb/mtu3/mtu3_gadget.c
@@ -92,7 +92,7 @@ static int mtu3_ep_enable(struct mtu3_ep *mep)
 				usb_endpoint_xfer_int(desc)) {
 			interval = desc->bInterval;
 			interval = clamp_val(interval, 1, 16) - 1;
-			burst = (max_packet & GENMASK(12, 11)) >> 11;
+			mult = (max_packet & GENMASK(12, 11)) >> 11;
 		}
 		break;
 	default:
-- 
2.18.0