Re: 答复: 答复: [PATCH 4/5] media: mtk-vcodec: Add two error cases upon vpu irq handling

Dafna Hirschfeld dafna.hirschfeld at collabora.com
Wed Aug 11 03:14:01 PDT 2021



On 09.08.21 11:12, Irui Wang (王瑞) wrote:
> Hi Dafna,
> 
>>> 2. Always happened  issue ?  timeout at the beginning or  in processing ?
> 
>> The commands that I run is:
> 
>>> sudo --user=#1000 /usr/local/libexec/chrome-binary-tests/video_encode_accelerator_tests --gtest_filter=-*NV12Dmabuf*  -->>codec=vp8 >/usr/local/share/tast/data/chromiumos/tast/local/bundles/cros/video/data/tulip2-320x180.yuv --disable_validator
> 
>>> The command sometime succeed but when I run it sequentially then at some point after few attempts I start to get those timeout errors.
> 
> It seems mean VP8 encoding function OK, but failed sometimes, did you have check VENC clock info during encoding:
> 
> cat /sys/kernel/debug/clk/clk_summary | grep venc:
> 
> venc_sel   > it's H.264 clock
> venclt_sel  > it's VP8 clock
> 
> the enable&prepare count is not 0 during encoding process.

I see that the values are indeed incremented while streaming.
When timeout occurs it is always in the beginning of the encoding. So upon the first call to vp8_enc_wait_venc_done.

Thanks,
Dafna


> 
> Thanks
> Best Regards
> 
> -----邮件原件-----
> 发件人: Dafna Hirschfeld [mailto:dafna.hirschfeld at collabora.com]
> 发送时间: 2021年8月9日 16:27
> 收件人: Irui Wang (王瑞)
> 抄送: Linux Media Mailing List; moderated list:ARM/Mediatek SoC support; Enric Balletbo i Serra
> 主题: Re: 答复: [PATCH 4/5] media: mtk-vcodec: Add two error cases upon vpu irq handling
> 
> 
> 
> On 09.08.21 09:37, Irui Wang (王瑞) wrote:
>> Hi Dafna,
>>
>>>> I am testing the vp8 encoder on chromeos and at some point the encoder interrupts stop arriving so I try to figure out why and report any possible error.
>> 1. Log shows wait IRQ timeout ?
> 
> Hi, yes, I get timeout when waiting to the encoder interrupt. The timeout is on vp8_enc_wait_venc_done
> 
> 
>> 2. Always happened  issue ?  timeout at the beginning or  in processing ?
> 
> The commands that I run is:
> 
> sudo --user=#1000 /usr/local/libexec/chrome-binary-tests/video_encode_accelerator_tests --gtest_filter=-*NV12Dmabuf*  --codec=vp8 /usr/local/share/tast/data/chromiumos/tast/local/bundles/cros/video/data/tulip2-320x180.yuv --disable_validator
> 
> The command sometime succeed but when I run it sequentially then at some point after few attempts I start to get those timeout errors.
> 
>> 3. how about IRQ infos?
>> cat /proc/interrupts | grep vcodec
>> 18002000.vcodec   >> it's H.264 encoder
>> 19002000.vcodec  >> it's  VP8 encoder
>>
>> I was told you have  met another H.264 encoding failed before, did you find reasons about that ?
> 
> No,
> But since I see that the google meetup uses the vp8 encoder I decided to test the vp8 first.
> 
>>> [   81.918747] [MTK_V4L2][ERROR] mtk_vcodec_wait_for_done_ctx:32: [3] ctx->type=1, cmd=1, wait_event_interruptible_timeout time=1000ms out 0 0!
>>> [   81.931392] [MTK_VCODEC][ERROR][3]: h264_encode_frame() irq_status=0 failed
>>> [   81.938470] [MTK_V4L2][ERROR] mtk_venc_worker:1219: venc_if_encode failed=-5
> 
> 
>>
>> MT8173 latest VPUD firmware:
>> https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmwar
>> e.git/commit/?id=aaed4a8bf9a77ec68376e8d92fb218d5fdd88b59
>>
> 
> I uses the latest firmware.
> 
> Thanks,
> Dafna
> 
>> Thanks
>> Best Regards
>>
>> -----邮件原件-----
>> 发件人: Dafna Hirschfeld [mailto:dafna.hirschfeld at collabora.com]
>> 发送时间: 2021年8月6日 15:49
>> 收件人: Irui Wang (王瑞); linux-kernel at vger.kernel.org;
>> linux-media at vger.kernel.org; linux-mediatek at lists.infradead.org
>> 抄送: dafna3 at gmail.com; tfiga at chromium.org; Tiffany Lin (林慧珊);
>> eizan at chromium.org; Maoguang Meng (孟毛广); kernel at collabora.com;
>> mchehab at kernel.org; hverkuil at xs4all.nl; Yunfei Dong (董云飞); Yong Wu
>> (吴勇); hsinyi at chromium.org; matthias.bgg at gmail.com; Andrew-CT Chen
>> (陳智迪); acourbot at chromium.org
>> 主题: Re: [PATCH 4/5] media: mtk-vcodec: Add two error cases upon vpu
>> irq handling
>>
>>
>>
>> On 06.08.21 08:58, Irui Wang (王瑞) wrote:
>>> On Wed, 2021-08-04 at 16:27 +0200, Dafna Hirschfeld wrote:
>>>> 1. Fail if the function mtk_vcodec_fw_map_dm_addr returns ERR
>>>> pointer.
>>>> 2. Fail if the state from the vpu msg is either
>>>> VEN_IPI_MSG_ENC_STATE_ERROR or VEN_IPI_MSG_ENC_STATE_PART
>>>>
>>>> Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld at collabora.com>
>>>> ---
>>>>    drivers/media/platform/mtk-vcodec/venc_vpu_if.c | 8 ++++++++
>>>>    1 file changed, 8 insertions(+)
>>>>
>>>> diff --git a/drivers/media/platform/mtk-vcodec/venc_vpu_if.c
>>>> b/drivers/media/platform/mtk-vcodec/venc_vpu_if.c
>>>> index 32dc844d16f9..234705ba7cd6 100644
>>>> --- a/drivers/media/platform/mtk-vcodec/venc_vpu_if.c
>>>> +++ b/drivers/media/platform/mtk-vcodec/venc_vpu_if.c
>>>> @@ -17,6 +17,8 @@ static int handle_enc_init_msg(struct
>>>> venc_vpu_inst *vpu, const void *data)
>>>>    vpu->vsi = mtk_vcodec_fw_map_dm_addr(vpu->ctx->dev->fw_handler,
>>>>         msg->vpu_inst_addr);
>>>>    
>>>> +if (IS_ERR(vpu->vsi))
>>>> +return PTR_ERR(vpu->vsi);
>>>>    /* Firmware version field value is unspecified on MT8173. */
>>>>    if (vpu->ctx->dev->venc_pdata->chip == MTK_MT8173)
>>>>    return 0;
>>>> @@ -42,6 +44,12 @@ static int handle_enc_encode_msg(struct
>>>> venc_vpu_inst *vpu, const void *data)
>>>>    vpu->state = msg->state;
>>>>    vpu->bs_size = msg->bs_size;
>>>>    vpu->is_key_frm = msg->is_key_frm;
>>>> +if (vpu->state == VEN_IPI_MSG_ENC_STATE_ERROR ||
>>>> +    vpu->state == VEN_IPI_MSG_ENC_STATE_PART) { mtk_vcodec_err(vpu,
>>>> +"bad ipi-enc-state: %s",
>>>> +       vpu->state ==
>>>> VEN_IPI_MSG_ENC_STATE_ERROR ? "ERR" : "PART");
>>>> +return -EINVAL;
>>>> +}
>>>
>>> Hi Dafna,
>>>
>>> This state check is useless, the enc result will check in
>>> "vpu_enc_ipi_handler".
>>>
>>
>> Hi, thanks for reviewing. I see that the vpu_enc_ipi_handler only test the msg->status and I see that the states are not tested anywhere except of "skip" state in the h264 enc.
>>
>> Can't there be a scenario where msg->status is ok but the state is error?
>> I am testing the vp8 encoder on chromeos and at some point the encoder interrupts stop arriving so I try to figure out why and report any possible error.
>>
>> Thanks,
>> Dafna
>>
>>> Thanks
>>>
>>>>    return 0;
>>>>    }
>>>>    
>>
>> ************* MEDIATEK Confidentiality Notice ******************** The
>> information contained in this e-mail message (including any
>> attachments) may be confidential, proprietary, privileged, or
>> otherwise exempt from disclosure under applicable laws. It is intended
>> to be conveyed only to the designated recipient(s). Any use,
>> dissemination, distribution, printing, retaining or copying of this
>> e-mail (including its
>> attachments) by unintended recipient(s) is strictly prohibited and may
>> be unlawful. If you are not an intended recipient of this e-mail, or
>> believe that you have received this e-mail in error, please notify the
>> sender immediately (by replying to this e-mail), delete any and all
>> copies of this e-mail (including any attachments) from your system,
>> and do not disclose the content of this e-mail to any other person. Thank you!
>>



More information about the Linux-mediatek mailing list