Aw: Re: [PATCH 0/2] Add MUSB for MT7623

[Frank Wunderlich]

Hi,

another strange thing is, after some bootups (i boot kernel from tftp, but also on full power cycle),
musb-driver maps musb-hdrc.4.auto instead of #1

root at bpi-r2:~# dmesg | grep musb
[    5.502914] musb-hdrc musb-hdrc.4.auto: MUSB HDRC host driver
[    5.508782] musb-hdrc musb-hdrc.4.auto: new USB bus registered, assigned bus number 5

and then nothing works (no roleswitch, no power which does not work with pinctl / without regulator).
It's hard to test if things working before, do no more work if device is named differently.

maybe Min Guo can help here?

after bootup mode is b_idle in my case (currently do not change if i connect otg cable)

root at bpi-r2:~# cat /sys/devices/platform/11200000.usb/musb-hdrc.4.auto/mode
b_idle

regards Frank