[PATCH v5 1/2] Bluetooth: btusb: Record debug log for Mediatek Chip.
mark-yw.chen at mediatek.com
mark-yw.chen at mediatek.com
Wed Aug 4 02:03:15 PDT 2021
From: "mark-yw.chen" <mark-yw.chen at mediatek.com>
Mediatek Bluetooth controller sends the FW log and FW dump via EP2.
This patch creates an MTK specified callback(btusb_recv_acl_mtk) to
replace the original one (hci_recv_frame) when an MTK controller is
detected. The new callback will separate the firmware dump traffics
from the ACL data to have them process separately.
1. Add a new field (recv_acl) to the btusb_data struct to store
vendor-specific ACL callback handler.
2. Add the MTK-specific ACL callback handler (btusb_recv_acl_mtk) to
process ACL data, debug log, and firmware dump.
3. The debug log traces LMP/LL events and connection quality reports.
4. The upper layer can use hci_channel_monitor to receive these
packets.
Example btmon: firmware debug log.
1. Enable firmware debug log.
< HCI Command: Vendor (0x3f|0x005d) plen 4
00 00 02 02 ....
> HCI Event: Command Complete (0x0e) plen 8
Vendor (0x3f|0x005d) ncmd 1
Status: Success (0x00)
00 00 02 02 ....
2. Diagnostic packet from controller
= Vendor Diagnostic (len 500)
ff 05 f0 01 fd ff 02 0e 08 01 5d fc 00 00 00 02
02 aa aa aa cb e3 f0 15 b0 0c 5f 01 00 d1 0f 33
01 7f 00 08 57 61 0c 00 00 00 00 00 23 37 17 00
fd ff 00 00 29 60 ff ff b1 56 e8 00 57 40 0a 40
39 95 f2 00 47 40 43 00 fc f0 16 00 57 61 0c 00
00 00 00 00 23 37 17 00 fd ff 00 00 29 60 ff ff
65 95 f2 00 57 40 0a 40 ec d3 fc 00 47 40 3b 00
2c f1 17 00 57 61 0c 00 00 00 00 00 23 37 17 00
fd ff 00 00 29 60 ff ff 19 d4 fc 00 57 40 76 1c
b2 61 01 01 47 40 b3 04 0b 63 18 00 fe ff 02 01
04 05 33 8b 9e 08 00 aa aa aa aa aa 27 38 01 02
01 00 00 00 02 e0 10 00 20 00 20 00 2a 08 40 00
20 00 20 08 2a 08 02 00 40 00 00 01 2e 08 40 00
01 67 b0 c2 2e 08 3e 07 ff ff ff ff 40 08 01 00
02 00 00 00 34 08 a3 00 00 00 00 00 34 08 a3 00
00 00 00 00 35 08 45 01 00 00 00 00 2e 08 40 00
01 67 b0 c2 30 35 01 02 00 00 00 00 2c 31 01 00
02 00 00 40 2d 19 03 00 00 40 00 00 fd ff 02 0f
04 00 01 01 04 aa aa aa aa aa aa aa 57 61 0c 00
00 00 00 00 23 46 32 00 01 00 00 00 2f 35 00 02
00 00 00 00 29 35 ff 02 00 22 00 00 2d 31 a6 02
02 00 00 00 31 6c 40 00 14 63 18 1b 31 6c 40 00
14 63 18 23 51 08 53 00 12 63 18 00 2c 35 12 01
fe 00 00 00 2b 35 fe 02 02 00 00 00 2f 31 21 00
00 00 02 00 75 61 01 00 4c 1b 93 00 79 61 01 00
00 00 00 00 12 e3 63 18 20 31 86 01 74 61 68 03
00 00 04 00 a1 73 ff 00 b9 01 00 00 a1 73 04 00
00 00 00 00 a1 73 00 00 00 00 00 00 a1 73 00 00
02 00 00 00 31 6c 40 00 16 63 18 0c 31 6c 40 00
16 63 18 1c 77 61 40 00 48 33 40 00 14 e3 63 18
40 31 86 01 00 d1 02 c5 07 23 a1 34 73 61 37 02
02 00 00 a1
Signed-off-by: mark-yw.chen <mark-yw.chen at mediatek.com>
Reviewed-by: Michael Sun <michaelfsun at google.com>
Reviewed-by: Archie Pusaka <apusaka at chromium.org>
---
drivers/bluetooth/btusb.c | 25 ++++++++++++++++++++++++-
1 file changed, 24 insertions(+), 1 deletion(-)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index b1a05bb9f4bf..115c01150c02 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -585,6 +585,7 @@ struct btusb_data {
int suspend_count;
int (*recv_event)(struct hci_dev *hdev, struct sk_buff *skb);
+ int (*recv_acl)(struct hci_dev *hdev, struct sk_buff *skb);
int (*recv_bulk)(struct btusb_data *data, void *buffer, int count);
int (*setup_on_usb)(struct hci_dev *hdev);
@@ -792,7 +793,7 @@ static int btusb_recv_bulk(struct btusb_data *data, void *buffer, int count)
if (!hci_skb_expect(skb)) {
/* Complete frame */
- hci_recv_frame(data->hdev, skb);
+ data->recv_acl(data->hdev, skb);
skb = NULL;
}
}
@@ -3887,6 +3888,25 @@ static int btusb_mtk_shutdown(struct hci_dev *hdev)
return 0;
}
+static int btusb_recv_acl_mtk(struct hci_dev *hdev, struct sk_buff *skb)
+{
+ struct btusb_data *data = hci_get_drvdata(hdev);
+ u16 handle = le16_to_cpu(hci_acl_hdr(skb)->handle);
+
+ switch (handle) {
+ case 0xfc6f: /* Firmware dump from device */
+ /* When the firmware hangs, the device can no longer
+ * suspend and thus disable auto-suspend.
+ */
+ usb_disable_autosuspend(data->udev);
+ case 0x05ff: /* Firmware debug logging 1 */
+ case 0x05fe: /* Firmware debug logging 2 */
+ return hci_recv_diag(hdev, skb);
+ }
+
+ return hci_recv_frame(hdev, skb);
+}
+
MODULE_FIRMWARE(FIRMWARE_MT7663);
MODULE_FIRMWARE(FIRMWARE_MT7668);
@@ -4590,6 +4610,8 @@ static int btusb_probe(struct usb_interface *intf,
data->recv_bulk = btusb_recv_bulk;
}
+ data->recv_acl = hci_recv_frame;
+
hdev = hci_alloc_dev();
if (!hdev)
return -ENOMEM;
@@ -4717,6 +4739,7 @@ static int btusb_probe(struct usb_interface *intf,
hdev->shutdown = btusb_mtk_shutdown;
hdev->manufacturer = 70;
set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
+ data->recv_acl = btusb_recv_acl_mtk;
}
if (id->driver_info & BTUSB_SWAVE) {
--
2.18.0
More information about the Linux-mediatek
mailing list