[PATCH net-next v2 2/4] net: dsa: mt7530: use independent VLAN learning on VLAN-unaware bridges

[DENG Qingfang]

On Tue, Aug 03, 2021 at 07:48:53PM +0300, Vladimir Oltean wrote:
> After this patch set gets merged, can you also please take a look at the
> following:
> 
> Documentation/networking/switchdev.rst says:
> 
> When the bridge has VLAN filtering enabled and a PVID is not configured on the
> ingress port, untagged and 802.1p tagged packets must be dropped. When the bridge
> has VLAN filtering enabled and a PVID exists on the ingress port, untagged and
> priority-tagged packets must be accepted and forwarded according to the
> bridge's port membership of the PVID VLAN. When the bridge has VLAN filtering
> disabled, the presence/lack of a PVID should not influence the packet
> forwarding decision.
> 
> I'm not sure if this happens or not with mt7530, since the driver
> attempts to change the pvid back to 0. You are not changing this
> behavior in this series, so no reason to deal with it as part of it.
> 

There is PVC.ACC_FRM which controls the acceptable frame type.
Currently the driver does not use it, so untagged and priority-tagged frames
can get into a VLAN-aware port without a PVID.