[RFC v4 net-next 1/4] net: phy: add MediaTek PHY driver

[DENG Qingfang]

On Mon, Apr 12, 2021 at 07:04:49AM +0000, René van Dorst wrote:
> Hi Qingfang,
> > +static void mtk_phy_config_init(struct phy_device *phydev)
> > +{
> > +	/* Disable EEE */
> > +	phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0);
> 
> For my EEE patch I changed this line to:
> 
> genphy_config_eee_advert(phydev);
> 
> So PHY EEE part is setup properly at boot, instead enable it manual via
> ethtool.
> This function also takes the DTS parameters "eee-broken-xxxx" in to account
> while
i> setting-up the PHY.

Thanks, I'm now testing with it.

> 
> > +
> > +	/* Enable HW auto downshift */
> > +	phy_modify_paged(phydev, MTK_PHY_PAGE_EXTENDED, 0x14, 0, BIT(4));