Re:Re: [PATCH] watchdog: mtk: support pre-timeout when the bark irq is available

[王擎]

>On 4/9/21 2:55 AM, Wang Qing wrote:
>> Use the bark interrupt as the pretimeout notifier if available.
>> 
>> By default, the pretimeout notification shall occur one second earlier
>> than the timeout.
>> 
>> Signed-off-by: Wang Qing <wangqing at vivo.com>
>> ---
>>  drivers/watchdog/mtk_wdt.c | 47 +++++++++++++++++++++++++++++++++++++++++++---
>>  1 file changed, 44 insertions(+), 3 deletions(-)
>> 
>> diff --git a/drivers/watchdog/mtk_wdt.c b/drivers/watchdog/mtk_wdt.c
>> index 97ca993..8b919cc
>> --- a/drivers/watchdog/mtk_wdt.c
>> +++ b/drivers/watchdog/mtk_wdt.c
>> @@ -25,6 +25,7 @@
>>  #include <linux/reset-controller.h>
>>  #include <linux/types.h>
>>  #include <linux/watchdog.h>
>> +#include <linux/interrupt.h>
>>  
>>  #define WDT_MAX_TIMEOUT		31
>>  #define WDT_MIN_TIMEOUT		1
>> @@ -234,18 +235,35 @@ static int mtk_wdt_start(struct watchdog_device *wdt_dev)
>>  	void __iomem *wdt_base = mtk_wdt->wdt_base;
>>  	int ret;
>>  
>> -	ret = mtk_wdt_set_timeout(wdt_dev, wdt_dev->timeout);
>> +	ret = mtk_wdt_set_timeout(wdt_dev, wdt_dev->timeout - wdt_dev->pretimeout);
>
>That looks suspiciously like the real watchdog won't happen at all.
>What will happen if the pretimeout governor is set to none ?
>
>Guenter
>
The pretimeout governor is panic by default. If pretimeout is enabled and the governor is
set to none, it means the timeout behavior does not need to be processed, only printing.

Thanks.

Qing Wang.