[PATCH v15 4/7] soc: mediatek: SVS: add debug commands
Roger Lu
roger.lu at mediatek.com
Fri Apr 9 10:28:25 BST 2021
The purpose of SVS is to help find the suitable voltages
for DVFS. Therefore, if SVS bank voltages are concerned
to be wrong, we can adjust SVS bank voltages by this patch.
Signed-off-by: Roger Lu <roger.lu at mediatek.com>
---
drivers/soc/mediatek/mtk-svs.c | 328 +++++++++++++++++++++++++++++++++
1 file changed, 328 insertions(+)
diff --git a/drivers/soc/mediatek/mtk-svs.c b/drivers/soc/mediatek/mtk-svs.c
index 7d134d47f871..39f29d9e4fc7 100644
--- a/drivers/soc/mediatek/mtk-svs.c
+++ b/drivers/soc/mediatek/mtk-svs.c
@@ -6,6 +6,7 @@
#include <linux/bits.h>
#include <linux/clk.h>
#include <linux/completion.h>
+#include <linux/debugfs.h>
#include <linux/device.h>
#include <linux/init.h>
#include <linux/interrupt.h>
@@ -24,6 +25,7 @@
#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
+#include <linux/seq_file.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/thermal.h>
@@ -60,6 +62,39 @@
#define SVSB_INTSTS_COMPLETE 0x1
#define SVSB_INTSTS_CLEAN 0x00ffffff
+#define debug_fops_ro(name) \
+ static int svs_##name##_debug_open(struct inode *inode, \
+ struct file *filp) \
+ { \
+ return single_open(filp, svs_##name##_debug_show, \
+ inode->i_private); \
+ } \
+ static const struct file_operations svs_##name##_debug_fops = { \
+ .owner = THIS_MODULE, \
+ .open = svs_##name##_debug_open, \
+ .read = seq_read, \
+ .llseek = seq_lseek, \
+ .release = single_release, \
+ }
+
+#define debug_fops_rw(name) \
+ static int svs_##name##_debug_open(struct inode *inode, \
+ struct file *filp) \
+ { \
+ return single_open(filp, svs_##name##_debug_show, \
+ inode->i_private); \
+ } \
+ static const struct file_operations svs_##name##_debug_fops = { \
+ .owner = THIS_MODULE, \
+ .open = svs_##name##_debug_open, \
+ .read = seq_read, \
+ .write = svs_##name##_debug_write, \
+ .llseek = seq_lseek, \
+ .release = single_release, \
+ }
+
+#define svs_dentry(name) {__stringify(name), &svs_##name##_debug_fops}
+
static DEFINE_SPINLOCK(mtk_svs_lock);
/*
@@ -81,6 +116,7 @@ enum svsb_phase {
SVSB_PHASE_INIT01,
SVSB_PHASE_INIT02,
SVSB_PHASE_MON,
+ SVSB_PHASE_NUM,
};
enum svs_reg_index {
@@ -138,6 +174,7 @@ enum svs_reg_index {
SPARE2,
SPARE3,
THSLPEVEB,
+ SVS_REG_NUM,
};
static const u32 svs_regs_v2[] = {
@@ -242,6 +279,7 @@ struct thermal_parameter {
* @opp_volts: signed-off voltages from default opp table
* @freqs_pct: percent of "opp_freqs / freq_base" for bank init
* @volts: bank voltages
+ * @reg_data: bank register data of each phase
* @freq_base: reference frequency for bank init
* @vboot: voltage request for bank init01 stage only
* @volt_step: bank voltage step
@@ -260,6 +298,7 @@ struct thermal_parameter {
* @opp_count: bank opp count
* @int_st: bank interrupt identification
* @sw_id: bank software identification
+ * @hw_id: bank hardware identification
* @ctl0: bank thermal sensor selection
* @cpu_id: cpu core id for SVS CPU only
*
@@ -286,6 +325,7 @@ struct svs_bank {
u32 opp_volts[16];
u32 freqs_pct[16];
u32 volts[16];
+ u32 reg_data[SVSB_PHASE_NUM][SVS_REG_NUM];
u32 freq_base;
u32 vboot;
u32 volt_step;
@@ -323,6 +363,7 @@ struct svs_bank {
u32 opp_count;
u32 int_st;
u32 sw_id;
+ u32 hw_id;
u32 ctl0;
u32 cpu_id;
};
@@ -638,11 +679,15 @@ static void svs_set_bank_phase(struct svs_platform *svsp,
static inline void svs_init01_isr_handler(struct svs_platform *svsp)
{
struct svs_bank *svsb = svsp->pbank;
+ enum svs_reg_index rg_i;
dev_info(svsb->dev, "%s: VDN74~30:0x%08x~0x%08x, DC:0x%08x\n",
__func__, svs_readl(svsp, VDESIGN74),
svs_readl(svsp, VDESIGN30), svs_readl(svsp, DCVALUES));
+ for (rg_i = DESCHAR; rg_i < SVS_REG_NUM; rg_i++)
+ svsb->reg_data[SVSB_PHASE_INIT01][rg_i] = svs_readl(svsp, rg_i);
+
svsb->phase = SVSB_PHASE_INIT01;
svsb->dc_voffset_in = ~(svs_readl(svsp, DCVALUES) & GENMASK(15, 0)) + 1;
if (svsb->init01_volt_flag == SVSB_INIT01_VOLT_IGNORE ||
@@ -662,11 +707,15 @@ static inline void svs_init01_isr_handler(struct svs_platform *svsp)
static inline void svs_init02_isr_handler(struct svs_platform *svsp)
{
struct svs_bank *svsb = svsp->pbank;
+ enum svs_reg_index rg_i;
dev_info(svsb->dev, "%s: VOP74~30:0x%08x~0x%08x, DC:0x%08x\n",
__func__, svs_readl(svsp, VOP74), svs_readl(svsp, VOP30),
svs_readl(svsp, DCVALUES));
+ for (rg_i = DESCHAR; rg_i < SVS_REG_NUM; rg_i++)
+ svsb->reg_data[SVSB_PHASE_INIT02][rg_i] = svs_readl(svsp, rg_i);
+
svsb->phase = SVSB_PHASE_INIT02;
svsp->get_vops(svsp);
@@ -677,6 +726,10 @@ static inline void svs_init02_isr_handler(struct svs_platform *svsp)
static inline void svs_mon_mode_isr_handler(struct svs_platform *svsp)
{
struct svs_bank *svsb = svsp->pbank;
+ enum svs_reg_index rg_i;
+
+ for (rg_i = DESCHAR; rg_i < SVS_REG_NUM; rg_i++)
+ svsb->reg_data[SVSB_PHASE_MON][rg_i] = svs_readl(svsp, rg_i);
svsb->phase = SVSB_PHASE_MON;
svsb->temp = svs_readl(svsp, TEMP) & GENMASK(7, 0);
@@ -688,6 +741,7 @@ static inline void svs_mon_mode_isr_handler(struct svs_platform *svsp)
static inline void svs_error_isr_handler(struct svs_platform *svsp)
{
struct svs_bank *svsb = svsp->pbank;
+ enum svs_reg_index rg_i;
dev_err(svsb->dev, "%s: CORESEL = 0x%08x\n",
__func__, svs_readl(svsp, CORESEL));
@@ -697,6 +751,9 @@ static inline void svs_error_isr_handler(struct svs_platform *svsp)
svs_readl(svsp, SMSTATE0), svs_readl(svsp, SMSTATE1));
dev_err(svsb->dev, "TEMP = 0x%08x\n", svs_readl(svsp, TEMP));
+ for (rg_i = DESCHAR; rg_i < SVS_REG_NUM; rg_i++)
+ svsb->reg_data[SVSB_PHASE_ERROR][rg_i] = svs_readl(svsp, rg_i);
+
svsb->mode_support = SVSB_MODE_ALL_DISABLE;
svsb->phase = SVSB_PHASE_ERROR;
@@ -1406,9 +1463,271 @@ static int svs_resume(struct device *dev)
return 0;
}
+/*
+ * svs_dump_debug_show - dump svs/thermal efuse and svs banks' registers
+ */
+static int svs_dump_debug_show(struct seq_file *m, void *p)
+{
+ struct svs_platform *svsp = (struct svs_platform *)m->private;
+ struct svs_bank *svsb;
+ unsigned long svs_reg_addr;
+ u32 idx, i, j;
+
+ for (i = 0; i < svsp->efuse_num; i++)
+ if (svsp->efuse && svsp->efuse[i])
+ seq_printf(m, "M_HW_RES%d = 0x%08x\n",
+ i, svsp->efuse[i]);
+
+ for (i = 0; i < svsp->tefuse_num; i++)
+ if (svsp->tefuse)
+ seq_printf(m, "THERMAL_EFUSE%d = 0x%08x\n",
+ i, svsp->tefuse[i]);
+
+ for (idx = 0; idx < svsp->bank_num; idx++) {
+ svsb = &svsp->banks[idx];
+
+ for (i = SVSB_PHASE_INIT01; i <= SVSB_PHASE_MON; i++) {
+ seq_printf(m, "Bank_number = %u\n", svsb->hw_id);
+
+ if (i == SVSB_PHASE_INIT01 || i == SVSB_PHASE_INIT02)
+ seq_printf(m, "mode = init%d\n", i);
+ else if (i == SVSB_PHASE_MON)
+ seq_puts(m, "mode = mon\n");
+ else
+ seq_puts(m, "mode = error\n");
+
+ for (j = DESCHAR; j < SVS_REG_NUM; j++) {
+ svs_reg_addr = (unsigned long)(svsp->base +
+ svsp->regs[j]);
+ seq_printf(m, "0x%08lx = 0x%08x\n",
+ svs_reg_addr, svsb->reg_data[i][j]);
+ }
+ }
+ }
+
+ return 0;
+}
+
+debug_fops_ro(dump);
+
+/*
+ * svs_enable_debug_show - show svs bank current enable phase
+ */
+static int svs_enable_debug_show(struct seq_file *m, void *v)
+{
+ struct svs_bank *svsb = (struct svs_bank *)m->private;
+
+ if (svsb->phase == SVSB_PHASE_INIT01)
+ seq_puts(m, "init1\n");
+ else if (svsb->phase == SVSB_PHASE_INIT02)
+ seq_puts(m, "init2\n");
+ else if (svsb->phase == SVSB_PHASE_MON)
+ seq_puts(m, "mon mode\n");
+ else if (svsb->phase == SVSB_PHASE_ERROR)
+ seq_puts(m, "disabled\n");
+ else
+ seq_puts(m, "unknown\n");
+
+ return 0;
+}
+
+/*
+ * svs_enable_debug_write - we only support svs bank disable control
+ */
+static ssize_t svs_enable_debug_write(struct file *filp,
+ const char __user *buffer,
+ size_t count, loff_t *pos)
+{
+ struct svs_bank *svsb = file_inode(filp)->i_private;
+ struct svs_platform *svsp = dev_get_drvdata(svsb->dev);
+ unsigned long flags;
+ int enabled, ret;
+ char *buf = NULL;
+
+ if (count >= PAGE_SIZE)
+ return -EINVAL;
+
+ buf = (char *)memdup_user_nul(buffer, count);
+ if (IS_ERR(buf))
+ return PTR_ERR(buf);
+
+ ret = kstrtoint(buf, 10, &enabled);
+ if (ret)
+ return ret;
+
+ if (!enabled) {
+ spin_lock_irqsave(&mtk_svs_lock, flags);
+ svsp->pbank = svsb;
+ svsb->mode_support = SVSB_MODE_ALL_DISABLE;
+ svs_switch_bank(svsp);
+ svs_writel(svsp, SVSB_EN_OFF, SVSEN);
+ svs_writel(svsp, SVSB_INTSTS_CLEAN, INTSTS);
+ spin_unlock_irqrestore(&mtk_svs_lock, flags);
+
+ svsb->phase = SVSB_PHASE_ERROR;
+ svs_adjust_pm_opp_volts(svsb, true);
+ }
+
+ kfree(buf);
+
+ return count;
+}
+
+debug_fops_rw(enable);
+
+/*
+ * svs_status_debug_show - show svs bank's tzone_temp/voltages/freqs_pct
+ * and its corresponding opp-table's opp_freqs/opp_volts
+ */
+static int svs_status_debug_show(struct seq_file *m, void *v)
+{
+ struct svs_bank *svsb = (struct svs_bank *)m->private;
+ struct dev_pm_opp *opp;
+ int tzone_temp = 0, ret;
+ u32 i;
+
+ ret = svs_get_bank_zone_temperature(svsb->tzone_name, &tzone_temp);
+ if (ret)
+ seq_printf(m, "%s: no \"%s\" zone?\n", svsb->name,
+ svsb->tzone_name);
+ else
+ seq_printf(m, "%s: temperature = %d\n", svsb->name, tzone_temp);
+
+ for (i = 0; i < svsb->opp_count; i++) {
+ opp = dev_pm_opp_find_freq_exact(svsb->opp_dev,
+ svsb->opp_freqs[i], true);
+ if (IS_ERR(opp)) {
+ seq_printf(m, "%s: cannot find freq = %u (%ld)\n",
+ svsb->name, svsb->opp_freqs[i],
+ PTR_ERR(opp));
+ return PTR_ERR(opp);
+ }
+
+ seq_printf(m, "opp_freqs[%02u]: %u, opp_volts[%02u]: %lu, ",
+ i, svsb->opp_freqs[i], i,
+ dev_pm_opp_get_voltage(opp));
+ seq_printf(m, "svsb_volts[%02u]: 0x%x, freqs_pct[%02u]: %u\n",
+ i, svsb->volts[i], i, svsb->freqs_pct[i]);
+ dev_pm_opp_put(opp);
+ }
+
+ return 0;
+}
+
+debug_fops_ro(status);
+
+/*
+ * svs_volt_offset_debug_show - show svs bank's voltage offset
+ */
+static int svs_volt_offset_debug_show(struct seq_file *m, void *v)
+{
+ struct svs_bank *svsb = (struct svs_bank *)m->private;
+
+ seq_printf(m, "%d\n", svsb->volt_offset);
+
+ return 0;
+}
+
+/*
+ * svs_volt_offset_debug_write - write svs bank's voltage offset
+ */
+static ssize_t svs_volt_offset_debug_write(struct file *filp,
+ const char __user *buffer,
+ size_t count, loff_t *pos)
+{
+ struct svs_bank *svsb = file_inode(filp)->i_private;
+ char *buf = NULL;
+ s32 volt_offset;
+
+ if (count >= PAGE_SIZE)
+ return -EINVAL;
+
+ buf = (char *)memdup_user_nul(buffer, count);
+ if (IS_ERR(buf))
+ return PTR_ERR(buf);
+
+ if (!kstrtoint(buf, 10, &volt_offset)) {
+ svsb->volt_offset = volt_offset;
+ svs_adjust_pm_opp_volts(svsb, true);
+ }
+
+ kfree(buf);
+
+ return count;
+}
+
+debug_fops_rw(volt_offset);
+
+static int svs_create_svs_debug_cmds(struct svs_platform *svsp)
+{
+ struct svs_bank *svsb;
+ struct dentry *svs_dir, *svsb_dir, *file_entry;
+ const char *d = "/sys/kernel/debug/svs";
+ u32 i, idx;
+
+ struct svs_dentry {
+ const char *name;
+ const struct file_operations *fops;
+ };
+
+ struct svs_dentry svs_entries[] = {
+ svs_dentry(dump),
+ };
+
+ struct svs_dentry svsb_entries[] = {
+ svs_dentry(enable),
+ svs_dentry(status),
+ svs_dentry(volt_offset),
+ };
+
+ svs_dir = debugfs_create_dir("svs", NULL);
+ if (IS_ERR(svs_dir)) {
+ dev_err(svsp->dev, "cannot create %s: %ld\n",
+ d, PTR_ERR(svs_dir));
+ return 0;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(svs_entries); i++) {
+ file_entry = debugfs_create_file(svs_entries[i].name, 0664,
+ svs_dir, svsp,
+ svs_entries[i].fops);
+ if (IS_ERR(file_entry)) {
+ dev_err(svsp->dev, "cannot create %s/%s: %ld\n",
+ d, svs_entries[i].name, PTR_ERR(file_entry));
+ return PTR_ERR(file_entry);
+ }
+ }
+
+ for (idx = 0; idx < svsp->bank_num; idx++) {
+ svsb = &svsp->banks[idx];
+
+ svsb_dir = debugfs_create_dir(svsb->name, svs_dir);
+ if (IS_ERR(svsb_dir)) {
+ dev_err(svsp->dev, "cannot create %s/%s: %ld\n",
+ d, svsb->name, PTR_ERR(svsb_dir));
+ return PTR_ERR(svsb_dir);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(svsb_entries); i++) {
+ file_entry = debugfs_create_file(svsb_entries[i].name,
+ 0664, svsb_dir, svsb,
+ svsb_entries[i].fops);
+ if (IS_ERR(file_entry)) {
+ dev_err(svsp->dev, "no %s/%s/%s?: %ld\n",
+ d, svsb->name, svsb_entries[i].name,
+ PTR_ERR(file_entry));
+ return PTR_ERR(file_entry);
+ }
+ }
+ }
+
+ return 0;
+}
+
static struct svs_bank svs_mt8183_banks[] = {
{
.sw_id = SVSB_CPU_LITTLE,
+ .hw_id = 0,
.cpu_id = 0,
.tzone_name = "tzts4",
.buck_name = "proc",
@@ -1444,6 +1763,7 @@ static struct svs_bank svs_mt8183_banks[] = {
},
{
.sw_id = SVSB_CPU_BIG,
+ .hw_id = 1,
.cpu_id = 4,
.tzone_name = "tzts5",
.buck_name = "proc",
@@ -1479,6 +1799,7 @@ static struct svs_bank svs_mt8183_banks[] = {
},
{
.sw_id = SVSB_CCI,
+ .hw_id = 2,
.tzone_name = "tzts4",
.buck_name = "proc",
.pd_req = false,
@@ -1513,6 +1834,7 @@ static struct svs_bank svs_mt8183_banks[] = {
},
{
.sw_id = SVSB_GPU,
+ .hw_id = 3,
.tzone_name = "tzts2",
.buck_name = "mali",
.pd_req = true,
@@ -1678,6 +2000,12 @@ static int svs_probe(struct platform_device *pdev)
goto svs_probe_iounmap;
}
+ ret = svs_create_svs_debug_cmds(svsp);
+ if (ret) {
+ dev_err(svsp->dev, "svs create debug cmds fail: %d\n", ret);
+ goto svs_probe_iounmap;
+ }
+
return 0;
svs_probe_iounmap:
--
2.18.0
More information about the Linux-mediatek
mailing list