[PATCH] gpu/drm: mediatek: hdmi: check for valid modes on MT8167
Neil Armstrong
narmstrong at baylibre.com
Fri Apr 9 09:43:08 BST 2021
On MT8167, only CEA modes and anything using a clock below 148500 is
supported for HDMI. This change adds some checks to make sure the
video format is OK for MT8167.
Signed-off-by: Fabien Parent <fparent at baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
---
drivers/gpu/drm/mediatek/mtk_hdmi.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi.c b/drivers/gpu/drm/mediatek/mtk_hdmi.c
index 8ee55f9e2954..991e2e935b93 100644
--- a/drivers/gpu/drm/mediatek/mtk_hdmi.c
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi.c
@@ -148,6 +148,8 @@ struct hdmi_audio_param {
struct mtk_hdmi_conf {
bool tz_disabled;
+ unsigned long max_mode_clock;
+ bool cea_modes_only;
};
struct mtk_hdmi {
@@ -1259,6 +1261,13 @@ static int mtk_hdmi_conn_mode_valid(struct drm_connector *conn,
return MODE_BAD;
}
+ if (hdmi->conf->cea_modes_only && !drm_match_cea_mode(mode))
+ return MODE_BAD;
+
+ if (hdmi->conf->max_mode_clock &&
+ mode->clock > hdmi->conf->max_mode_clock)
+ return MODE_CLOCK_HIGH;
+
if (mode->clock < 27000)
return MODE_CLOCK_LOW;
if (mode->clock > 297000)
@@ -1810,10 +1819,18 @@ static const struct mtk_hdmi_conf mtk_hdmi_conf_mt2701 = {
.tz_disabled = true,
};
+static const struct mtk_hdmi_conf mtk_hdmi_conf_mt8167 = {
+ .max_mode_clock = 148500,
+ .cea_modes_only = true,
+};
+
static const struct of_device_id mtk_drm_hdmi_of_ids[] = {
{ .compatible = "mediatek,mt2701-hdmi",
.data = &mtk_hdmi_conf_mt2701,
},
+ { .compatible = "mediatek,mt8167-hdmi",
+ .data = &mtk_hdmi_conf_mt8167,
+ },
{ .compatible = "mediatek,mt8173-hdmi",
},
{}
--
2.25.1
More information about the Linux-mediatek
mailing list