[PATCH v3 1/7] dt-bindings: devapc: Add 'vio-idx-num' field to support mt8192

Nina Wu nina-cm.wu at mediatek.com
Fri Apr 9 09:19:31 BST 2021


From: Nina Wu <Nina-CM.Wu at mediatek.com>

For new ICs, there are multiple devapc HWs for different subsys.
We add a field 'vio-idx-num' in DT to indicate the number of
devices controlled by each devapc.
To be backward compatible with old ICs which have only one devapc
HW, this field is not required. The 'vio-idx-num' info will be set
in compatible data instead.

Signed-off-by: Nina Wu <Nina-CM.Wu at mediatek.com>
---
 Documentation/devicetree/bindings/soc/mediatek/devapc.yaml | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/soc/mediatek/devapc.yaml b/Documentation/devicetree/bindings/soc/mediatek/devapc.yaml
index 31e4d3c..909e524 100644
--- a/Documentation/devicetree/bindings/soc/mediatek/devapc.yaml
+++ b/Documentation/devicetree/bindings/soc/mediatek/devapc.yaml
@@ -20,11 +20,17 @@ properties:
   compatible:
     enum:
       - mediatek,mt6779-devapc
+      - mediatek,mt8192-devapc
 
   reg:
     description: The base address of devapc register bank
     maxItems: 1
 
+  mediatek,vio-idx-num:
+    description: The number of the devices controlled by devapc
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maxItems: 1
+
   interrupts:
     description: A single interrupt specifier
     maxItems: 1
-- 
2.6.4


More information about the Linux-mediatek mailing list