[PATCH 4/6] usb: xhci-mtk: add support runtime PM
Ikjoon Jang
ikjn at chromium.org
Fri Apr 9 06:45:49 BST 2021
On Thu, Apr 8, 2021 at 5:35 PM Chunfeng Yun <chunfeng.yun at mediatek.com> wrote:
>
> A dedicated wakeup irq will be used to handle runtime suspend/resume,
> we use dev_pm_set_dedicated_wake_irq API to take care of requesting
> and attaching wakeup irq, then the suspend/resume framework will help
> to enable/disable wakeup irq.
>
> The runtime PM is default off since some platforms may not support it.
> users can enable it via power/control (set "auto") in sysfs.
>
> Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
> ---
> drivers/usb/host/xhci-mtk.c | 140 +++++++++++++++++++++++++++++++-----
> 1 file changed, 124 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
> index a74764ab914a..30927f4064d4 100644
> --- a/drivers/usb/host/xhci-mtk.c
> +++ b/drivers/usb/host/xhci-mtk.c
> @@ -16,6 +16,7 @@
> #include <linux/of.h>
> #include <linux/platform_device.h>
> #include <linux/pm_runtime.h>
> +#include <linux/pm_wakeirq.h>
> #include <linux/regmap.h>
> #include <linux/regulator/consumer.h>
>
> @@ -358,7 +359,6 @@ static int usb_wakeup_of_property_parse(struct xhci_hcd_mtk *mtk,
> mtk->uwk_reg_base, mtk->uwk_vers);
>
> return PTR_ERR_OR_ZERO(mtk->uwk);
> -
> }
>
> static void usb_wakeup_set(struct xhci_hcd_mtk *mtk, bool enable)
> @@ -458,6 +458,7 @@ static int xhci_mtk_probe(struct platform_device *pdev)
> struct resource *res;
> struct usb_hcd *hcd;
> int ret = -ENODEV;
> + int wakeup_irq;
> int irq;
>
> if (usb_disabled())
> @@ -485,6 +486,21 @@ static int xhci_mtk_probe(struct platform_device *pdev)
> if (ret)
> return ret;
>
> + irq = platform_get_irq_byname_optional(pdev, "host");
> + if (irq < 0) {
> + if (irq == -EPROBE_DEFER)
> + return irq;
> +
> + /* for backward compatibility */
> + irq = platform_get_irq(pdev, 0);
> + if (irq < 0)
> + return irq;
> + }
> +
> + wakeup_irq = platform_get_irq_byname_optional(pdev, "wakeup");
> + if (wakeup_irq == -EPROBE_DEFER)
> + return wakeup_irq;
> +
> mtk->lpm_support = of_property_read_bool(node, "usb3-lpm-capable");
> /* optional property, ignore the error if it does not exist */
> of_property_read_u32(node, "mediatek,u3p-dis-msk",
> @@ -496,9 +512,11 @@ static int xhci_mtk_probe(struct platform_device *pdev)
> return ret;
> }
>
> + pm_runtime_set_active(dev);
> + pm_runtime_use_autosuspend(dev);
> + pm_runtime_set_autosuspend_delay(dev, 4000);
> pm_runtime_enable(dev);
> pm_runtime_get_sync(dev);
> - device_enable_async_suspend(dev);
>
> ret = xhci_mtk_ldos_enable(mtk);
> if (ret)
> @@ -508,12 +526,6 @@ static int xhci_mtk_probe(struct platform_device *pdev)
> if (ret)
> goto disable_ldos;
>
> - irq = platform_get_irq(pdev, 0);
> - if (irq < 0) {
> - ret = irq;
> - goto disable_clk;
> - }
> -
> hcd = usb_create_hcd(driver, dev, dev_name(dev));
> if (!hcd) {
> ret = -ENOMEM;
> @@ -579,8 +591,26 @@ static int xhci_mtk_probe(struct platform_device *pdev)
> if (ret)
> goto dealloc_usb2_hcd;
>
> + if (wakeup_irq > 0) {
> + ret = dev_pm_set_dedicated_wake_irq(dev, wakeup_irq);
> + if (ret) {
> + dev_err(dev, "set wakeup irq %d failed\n", wakeup_irq);
> + goto dealloc_usb3_hcd;
> + }
> + dev_info(dev, "wakeup irq %d\n", wakeup_irq);
> + }
> +
> + device_enable_async_suspend(dev);
> + pm_runtime_mark_last_busy(dev);
> + pm_runtime_put_autosuspend(dev);
> + pm_runtime_forbid(dev);
> +
> return 0;
>
> +dealloc_usb3_hcd:
> + usb_remove_hcd(xhci->shared_hcd);
> + xhci->shared_hcd = NULL;
> +
> dealloc_usb2_hcd:
> usb_remove_hcd(hcd);
>
> @@ -601,25 +631,26 @@ static int xhci_mtk_probe(struct platform_device *pdev)
> xhci_mtk_ldos_disable(mtk);
>
> disable_pm:
> - pm_runtime_put_sync(dev);
> + pm_runtime_put_sync_autosuspend(dev);
> pm_runtime_disable(dev);
> return ret;
> }
>
> -static int xhci_mtk_remove(struct platform_device *dev)
> +static int xhci_mtk_remove(struct platform_device *pdev)
> {
> - struct xhci_hcd_mtk *mtk = platform_get_drvdata(dev);
> + struct xhci_hcd_mtk *mtk = platform_get_drvdata(pdev);
> struct usb_hcd *hcd = mtk->hcd;
> struct xhci_hcd *xhci = hcd_to_xhci(hcd);
> struct usb_hcd *shared_hcd = xhci->shared_hcd;
> + struct device *dev = &pdev->dev;
>
> - pm_runtime_put_noidle(&dev->dev);
> - pm_runtime_disable(&dev->dev);
> + pm_runtime_get_sync(dev);
> + xhci->xhc_state |= XHCI_STATE_REMOVING;
> + dev_pm_clear_wake_irq(dev);
> + device_init_wakeup(dev, false);
>
> usb_remove_hcd(shared_hcd);
> xhci->shared_hcd = NULL;
> - device_init_wakeup(&dev->dev, false);
> -
> usb_remove_hcd(hcd);
> usb_put_hcd(shared_hcd);
> usb_put_hcd(hcd);
> @@ -627,6 +658,10 @@ static int xhci_mtk_remove(struct platform_device *dev)
> xhci_mtk_clks_disable(mtk);
> xhci_mtk_ldos_disable(mtk);
>
> + pm_runtime_disable(dev);
> + pm_runtime_put_noidle(dev);
> + pm_runtime_set_suspended(dev);
> +
> return 0;
> }
>
> @@ -690,10 +725,83 @@ static int __maybe_unused xhci_mtk_resume(struct device *dev)
> return ret;
> }
>
> +static int check_rhub_status(struct xhci_hcd *xhci, struct xhci_hub *rhub)
> +{
> + u32 suspended_ports;
> + u32 status;
> + int num_ports;
> + int i;
> +
> + num_ports = rhub->num_ports;
> + suspended_ports = rhub->bus_state.suspended_ports;
> + for (i = 0; i < num_ports; i++) {
> + if (!(suspended_ports & BIT(i))) {
> + status = readl(rhub->ports[i]->addr);
> + if (status & PORT_CONNECT)
So this pm_runtime support is activated only when there's no devices
connected at all?
I think this will always return -EBUSY with my board having an on-board hub
connected to both rhubs.
> + return -EBUSY;
> + }
> + }
> +
> + return 0;
> +}
> +
> +/*
> + * check the bus whether it could suspend or not
> + * the bus will suspend if the downstream ports are already suspended,
> + * or no devices connected.
> + */
> +static int check_bus_status(struct xhci_hcd *xhci)
> +{
> + int ret;
> +
> + ret = check_rhub_status(xhci, &xhci->usb3_rhub);
> + if (ret)
> + return ret;
> +
> + return check_rhub_status(xhci, &xhci->usb2_rhub);
> +}
> +
> +static int __maybe_unused xhci_mtk_runtime_suspend(struct device *dev)
> +{
> + struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev);
> + struct xhci_hcd *xhci = hcd_to_xhci(mtk->hcd);
> + int ret = 0;
> +
> + if (xhci->xhc_state)
> + return -ESHUTDOWN;
> +
> + if (device_may_wakeup(dev)) {
> + ret = check_bus_status(xhci);
> + if (!ret)
> + ret = xhci_mtk_suspend(dev);
> + }
> +
> + /* -EBUSY: let PM automatically reschedule another autosuspend */
> + return ret ? -EBUSY : 0;
> +}
> +
> +static int __maybe_unused xhci_mtk_runtime_resume(struct device *dev)
> +{
> + struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev);
> + struct xhci_hcd *xhci = hcd_to_xhci(mtk->hcd);
> + int ret = 0;
> +
> + if (xhci->xhc_state)
> + return -ESHUTDOWN;
> +
> + if (device_may_wakeup(dev))
> + ret = xhci_mtk_resume(dev);
> +
> + return ret;
> +}
> +
> static const struct dev_pm_ops xhci_mtk_pm_ops = {
> SET_SYSTEM_SLEEP_PM_OPS(xhci_mtk_suspend, xhci_mtk_resume)
> + SET_RUNTIME_PM_OPS(xhci_mtk_runtime_suspend,
> + xhci_mtk_runtime_resume, NULL)
> };
> -#define DEV_PM_OPS IS_ENABLED(CONFIG_PM) ? &xhci_mtk_pm_ops : NULL
> +
> +#define DEV_PM_OPS (IS_ENABLED(CONFIG_PM) ? &xhci_mtk_pm_ops : NULL)
>
> static const struct of_device_id mtk_xhci_of_match[] = {
> { .compatible = "mediatek,mt8173-xhci"},
> --
> 2.18.0
>
More information about the Linux-mediatek
mailing list