[RFC v3 net-next 0/4] MT7530 interrupt support

[Andrew Lunn]

On Thu, Apr 08, 2021 at 11:00:08PM +0800, DENG Qingfang wrote:
> Hi René,
> 
> On Thu, Apr 8, 2021 at 10:02 PM René van Dorst <opensource at vdorst.com> wrote:
> >
> > Tested on Ubiquiti ER-X-SFP (MT7621) with 1 external phy which uses irq=POLL.
> >
> 
> I wonder if the external PHY's IRQ can be registered in the devicetree.
> Change MT7530_NUM_PHYS to 6, and add the following to ER-X-SFP dts PHY node:

I don't know this platform. What is the PHYs interrupt pin connected
to? A SoC GPIO? There is a generic mechanism to describe PHY
interrupts in DT. That should be used, if it is a GPIO.

	   Andrew