[PATCH 11/12] soc: mediatek: pm-domains: Add support for mt8183

Hsin-Yi Wang hsinyi at chromium.org
Fri Sep 25 03:37:34 EDT 2020


On Wed, Sep 16, 2020 at 8:19 PM Matthias Brugger <matthias.bgg at gmail.com> wrote:
>
>
>
> On 16/09/2020 11:46, Matthias Brugger wrote:
> >
> >
> > On 10/09/2020 19:28, Enric Balletbo i Serra wrote:
> >> From: Matthias Brugger <mbrugger at suse.com>
> >>
> >> Add the needed board data to support mt8183 SoC.
> >>
> >> Signed-off-by: Matthias Brugger <mbrugger at suse.com>
> >> Signed-off-by: Enric Balletbo i Serra <enric.balletbo at collabora.com>
> >> ---
> >>
> >>   drivers/soc/mediatek/mtk-pm-domains.c | 162 ++++++++++++++++++++++++++
> >>   include/linux/soc/mediatek/infracfg.h |  28 +++++
> >>   2 files changed, 190 insertions(+)
> >>
> >> diff --git a/drivers/soc/mediatek/mtk-pm-domains.c
> >> b/drivers/soc/mediatek/mtk-pm-domains.c
> >> index 29e88adc8ea6..aa434f616fee 100644
> >> --- a/drivers/soc/mediatek/mtk-pm-domains.c
> >> +++ b/drivers/soc/mediatek/mtk-pm-domains.c
> > [...]
> >> +/*
> >> + * MT8183 power domain support
> >> + */
> >> +static const struct scpsys_domain_data scpsys_domain_data_mt8183[] = {
> >> +    [MT8183_POWER_DOMAIN_AUDIO] = {
> >> +        .sta_mask = PWR_STATUS_AUDIO,
> >> +        .ctl_offs = 0x0314,
> >> +        .sram_pdn_bits = GENMASK(11, 8),
> >> +        .sram_pdn_ack_bits = GENMASK(15, 12),
> >> +    },
> >> +    [MT8183_POWER_DOMAIN_CONN] = {
> >> +        .sta_mask = PWR_STATUS_CONN,
> >> +        .ctl_offs = 0x032c,
> >> +        .sram_pdn_bits = 0,
> >> +        .sram_pdn_ack_bits = 0,
> >> +        .bp_infracfg = {
> >> +            BUS_PROT_WR(MT8183_TOP_AXI_PROT_EN_CONN, 0x2a0, 0x2a4, 0x228),
> >
> > We have repeating values triplets for set, clear and status register in infracfg
> > and SMI.
> >
> > Weiyi can you help to get names to this registers? I wasn't able to find
> > anything in the datasheet.
>
> I think for the infracfg part I figured it out:
>
> #define INFRA_TOPAXI_PROTECTEN_SET      0x2a0
> #define INFRA_TOPAXI_PROTECTEN_CLR      0x2a4
> #define INFRA_TOPAXI_PROTECTEN_STA1     0x228
>
> #define INFRA_TOPAXI_PROTECTEN_1_SET    0x2a8
> #define INFRA_TOPAXI_PROTECTEN_1_CLR    0x2ac
> #define INFRA_TOPAXI_PROTECTEN_STA1_1   0x258
>
> #define INFRA_TOPAXI_PROTECTEN_MCU_SET  0x2d4
> #define INFRA_TOPAXI_PROTECTEN_MCU_CLR  0x2d8
> #define INFRA_TOPAXI_PROTECTEN_MM_STA1  0x2ec
>
> Weiyi, can you still provide the register names for the SMI?
>
> Thanks in advance!
> Matthias
>
Hi Matthias,

SMI names are
#define SMI_COMMON_CLAMP_EN 0x3c0
#define SMI_COMMON_CLAMP_EN_SET 0x3c4
#define SMI_COMMON_CLAMP_EN_CLR 0x3c8

Thanks



More information about the Linux-mediatek mailing list