[PATCH] mt76: mt7915: add offchannel condition in switch channel command

[Shayne Chen]

Add a missing offchannel condition for channel switch reason, which
bypasses DPD calibration to reduce scanning time.

Signed-off-by: Shayne Chen <shayne.chen at mediatek.com>
---
 drivers/net/wireless/mediatek/mt76/mt7915/mcu.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
index fa3ea46..742e085 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
@@ -3212,8 +3212,10 @@ int mt7915_mcu_set_chan_info(struct mt7915_phy *phy, int cmd)
 		.channel_band = chandef->chan->band,
 	};
 
-	if ((chandef->chan->flags & IEEE80211_CHAN_RADAR) &&
-	    chandef->chan->dfs_state != NL80211_DFS_AVAILABLE)
+	if (dev->mt76.hw->conf.flags & IEEE80211_CONF_OFFCHANNEL)
+		req.switch_reason = CH_SWITCH_SCAN_BYPASS_DPD;
+	else if ((chandef->chan->flags & IEEE80211_CHAN_RADAR) &&
+		 chandef->chan->dfs_state != NL80211_DFS_AVAILABLE)
 		req.switch_reason = CH_SWITCH_DFS;
 	else
 		req.switch_reason = CH_SWITCH_NORMAL;
-- 
2.17.1