[PATCH v2 2/5] spi: spi-mtk-nor: fix mishandled logics in checking SPI memory operation

Ikjoon Jang ikjn at chromium.org
Mon Sep 21 02:10:19 EDT 2020


On Fri, Sep 18, 2020 at 9:09 PM Chuanhong Guo <gch981213 at gmail.com> wrote:
>
> Hi!
>
> On Fri, Sep 18, 2020 at 4:34 PM Ikjoon Jang <ikjn at chromium.org> wrote:
> >
> > Fix a simple bug which can limits its transfer size,
> > and add a simple helper function for code cleanups.
> >
> > Fixes: a59b2c7c56bf ("spi: spi-mtk-nor: support standard spi properties")
> > Signed-off-by: Ikjoon Jang <ikjn at chromium.org>
> >
> > ---
> >
> > (no changes since v1)
> >
> >  drivers/spi/spi-mtk-nor.c | 62 ++++++++++++++++++++++++---------------
> >  1 file changed, 38 insertions(+), 24 deletions(-)
> >
> > diff --git a/drivers/spi/spi-mtk-nor.c b/drivers/spi/spi-mtk-nor.c
> > index 6e6ca2b8e6c8..54b2c0fde95b 100644
> > --- a/drivers/spi/spi-mtk-nor.c
> > +++ b/drivers/spi/spi-mtk-nor.c
> > @@ -167,52 +167,63 @@ static bool mtk_nor_match_read(const struct spi_mem_op *op)
> >         return false;
> >  }
> >
> > -static int mtk_nor_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op)
> > +static bool need_bounce(void *cpu_addr, unsigned long len)
> >  {
> > -       size_t len;
> > +       return !!(((uintptr_t)cpu_addr) & MTK_NOR_DMA_ALIGN_MASK);
> > +}
>
> parameter 'len' isn't used in this function.

ACK.

>
> >
> > +static int mtk_nor_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op)
> > +{
> >         if (!op->data.nbytes)
> >                 return 0;
> >
> >         if ((op->addr.nbytes == 3) || (op->addr.nbytes == 4)) {
> > -               if ((op->data.dir == SPI_MEM_DATA_IN) &&
> > -                   mtk_nor_match_read(op)) {
>
> I think replacing a if/else if with a two-case switch is more
> of a personal code preference rather than code cleanup.
> I'd prefer only adding need_bounce to replace alignment
> check using a separated commit and leave other stuff
> untouched because:
> 1. This "cleanup" made unintended logic changes (see below)
> 2. The "cleanup" itself actually becomes the major part of
>     this patch, while the actual fix mentioned in commit
>     message is the minor part.
> 3. A fix commit should contain the fix itself. It shouldn't
>     mix with these code changes.

Got it, v3 will only include the fix itself.

>
> > +               switch (op->data.dir) {
> > +               case SPI_MEM_DATA_IN:
> > +                       if (!mtk_nor_match_read(op))
> > +                               return -EINVAL;
>
> You are changing the code logic here.
> mtk_nor_match_read checks if the operation can be executed
> using controller PIO/DMA reading. Even if it's not supported,
> we can still use PRG mode to execute the operation.
> One example of such an operation is SPI NOR SFDP reading.
> Your change breaks that which then breaks 1_2_2 and 1_4_4
> reading capability because spi-nor driver parses these op formats
> from SFDP table.

As you already noticed it, this is a bug from the last patch I made
and v2 isn't fixing this problem. This should be restored & fixed in v3.
And will not include other changes in a same patch.

>
> > +                       /* check if it's DMAable */
> >                         if ((op->addr.val & MTK_NOR_DMA_ALIGN_MASK) ||
> > -                           (op->data.nbytes < MTK_NOR_DMA_ALIGN))
> > +                           (op->data.nbytes < MTK_NOR_DMA_ALIGN)) {
> >                                 op->data.nbytes = 1;
> > -                       else if (!((ulong)(op->data.buf.in) &
> > -                                  MTK_NOR_DMA_ALIGN_MASK))
> > +                       } else {
> > +                               if (need_bounce(op->data.buf.in, op->data.nbytes) &&
> > +                                   (op->data.nbytes > MTK_NOR_BOUNCE_BUF_SIZE))
> > +                                       op->data.nbytes = MTK_NOR_BOUNCE_BUF_SIZE;
> >                                 op->data.nbytes &= ~MTK_NOR_DMA_ALIGN_MASK;
> > -                       else if (op->data.nbytes > MTK_NOR_BOUNCE_BUF_SIZE)
> > -                               op->data.nbytes = MTK_NOR_BOUNCE_BUF_SIZE;
>
> data length alignment is intentionally done only for DMA reading
> without the bounce buffer.
> My intention here:
> If we use the bounce buffer, we can read more data than needed to.
> Say we want 25 bytes of data, reading 32 bytes using DMA and
> bounce buffer should be faster than reading 16 bytes with DMA
> and another 9 bytes with PIO, because for every single byte of PIO
> reading, adjust_op_size and exec_op is called once, we
> program controller with new cmd/address, and controller need
> to send extra cmd/address to flash.
> I noticed that you removed this part of logic from DMA reading
> execution in 3/5 as well. Please revert the logic change here
> add in DMA reading function (see later comment in 3/5).

In v2, I wasn't sure whether this behavior is sane (read more than requested)
Now I think this is okay, I've missed the fact that flash address is
also aligned together.
I'll just keep the previous logics with padding in v3.

Thanks!

>
> > -                       return 0;
> > -               } else if (op->data.dir == SPI_MEM_DATA_OUT) {
> > +                       }
> > +                       break;
> > +               case SPI_MEM_DATA_OUT:
> >                         if (op->data.nbytes >= MTK_NOR_PP_SIZE)
> >                                 op->data.nbytes = MTK_NOR_PP_SIZE;
> >                         else
> >                                 op->data.nbytes = 1;
> > -                       return 0;
> > +                       break;
> > +               default:
> > +                       break;
> >                 }
> > +       } else {
> > +               u8 len = op->cmd.nbytes + op->addr.nbytes + op->dummy.nbytes;
> > +
> > +               if (len > MTK_NOR_PRG_MAX_SIZE)
> > +                       return -EINVAL;
> > +               if (op->data.nbytes && !(MTK_NOR_PRG_MAX_SIZE - len))
> > +                       return -EINVAL;
> > +               if (op->data.nbytes > (MTK_NOR_PRG_MAX_SIZE - len))
> > +                       op->data.nbytes = MTK_NOR_PRG_MAX_SIZE - len;
> >         }
> >
> > -       len = MTK_NOR_PRG_MAX_SIZE - op->cmd.nbytes - op->addr.nbytes -
> > -             op->dummy.nbytes;
> > -       if (op->data.nbytes > len)
> > -               op->data.nbytes = len;
> > -
> >         return 0;
> >  }
> >
> >  static bool mtk_nor_supports_op(struct spi_mem *mem,
> >                                 const struct spi_mem_op *op)
> >  {
> > -       size_t len;
> > -
> >         if (op->cmd.buswidth != 1)
> >                 return false;
> >
> >         if ((op->addr.nbytes == 3) || (op->addr.nbytes == 4)) {
> > -               switch(op->data.dir) {
> > +               switch (op->data.dir) {
> >                 case SPI_MEM_DATA_IN:
> >                         if (!mtk_nor_match_read(op))
> >                                 return false;
> > @@ -226,11 +237,14 @@ static bool mtk_nor_supports_op(struct spi_mem *mem,
> >                 default:
> >                         break;
> >                 }
> > +       } else {
> > +               u8 len = op->cmd.nbytes + op->addr.nbytes + op->dummy.nbytes;
> > +
> > +               if (len > MTK_NOR_PRG_MAX_SIZE)
> > +                       return false;
> > +               if (op->data.nbytes && !(MTK_NOR_PRG_MAX_SIZE - len))
> > +                       return false;
> >         }
> > -       len = op->cmd.nbytes + op->addr.nbytes + op->dummy.nbytes;
> > -       if ((len > MTK_NOR_PRG_MAX_SIZE) ||
> > -           ((op->data.nbytes) && (len == MTK_NOR_PRG_MAX_SIZE)))
> > -               return false;
> >
> >         return spi_mem_default_supports_op(mem, op);
> >  }
> > --
> > 2.28.0.681.g6f77f65b4e-goog
> >
>
>
> --
> Regards,
> Chuanhong Guo



More information about the Linux-mediatek mailing list