[PATCH v3 06/15] arm64: dts: ti: align GPIO hog names with dtschema

Krzysztof Kozlowski krzk at kernel.org
Wed Sep 16 11:57:06 EDT 2020


The convention for node names is to use hyphens, not underscores.
dtschema for pca95xx expects GPIO hogs to end with 'hog' prefix.

Signed-off-by: Krzysztof Kozlowski <krzk at kernel.org>
---
 arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index 648267284582..456e7818b521 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -407,7 +407,7 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 
-		p09 {
+		p09-hog {
 			/* P11 - MCASP/TRACE_MUX_S0 */
 			gpio-hog;
 			gpios = <9 GPIO_ACTIVE_HIGH>;
@@ -415,7 +415,7 @@
 			line-name = "MCASP/TRACE_MUX_S0";
 		};
 
-		p10 {
+		p10-hog {
 			/* P12 - MCASP/TRACE_MUX_S1 */
 			gpio-hog;
 			gpios = <10 GPIO_ACTIVE_HIGH>;
-- 
2.17.1




More information about the Linux-mediatek mailing list