[PATCH v5 2/4] PCI: mediatek: Use regmap to get shared pcie-cfg base

Chuanjia Liu chuanjia.liu at mediatek.com
Sat Sep 12 22:46:34 EDT 2020


On Thu, 2020-09-10 at 12:44 +0200, Matthias Brugger wrote:
> 
> On 10/09/2020 08:11, Chuanjia Liu wrote:
> > Use regmap to get shared pcie-cfg base and change
> > the method to get pcie irq.
> > 
> > Acked-by: Ryder Lee <ryder.lee at mediatek.com>
> > Signed-off-by: Chuanjia Liu <chuanjia.liu at mediatek.com>
> > ---
> >   drivers/pci/controller/pcie-mediatek.c | 25 ++++++++++++++++++-------
> >   1 file changed, 18 insertions(+), 7 deletions(-)
> > 
> > diff --git a/drivers/pci/controller/pcie-mediatek.c b/drivers/pci/controller/pcie-mediatek.c
> > index cf4c18f0c25a..987845d19982 100644
> > --- a/drivers/pci/controller/pcie-mediatek.c
> > +++ b/drivers/pci/controller/pcie-mediatek.c
> > @@ -14,6 +14,7 @@
> >   #include <linux/irqchip/chained_irq.h>
> >   #include <linux/irqdomain.h>
> >   #include <linux/kernel.h>
> > +#include <linux/mfd/syscon.h>
> >   #include <linux/msi.h>
> >   #include <linux/module.h>
> >   #include <linux/of_address.h>
> > @@ -23,6 +24,7 @@
> >   #include <linux/phy/phy.h>
> >   #include <linux/platform_device.h>
> >   #include <linux/pm_runtime.h>
> > +#include <linux/regmap.h>
> >   #include <linux/reset.h>
> >   
> >   #include "../pci.h"
> > @@ -205,6 +207,7 @@ struct mtk_pcie_port {
> >    * struct mtk_pcie - PCIe host information
> >    * @dev: pointer to PCIe device
> >    * @base: IO mapped register base
> > + * @cfg: IO mapped register map for PCIe config
> >    * @free_ck: free-run reference clock
> >    * @mem: non-prefetchable memory resource
> >    * @ports: pointer to PCIe port information
> > @@ -213,6 +216,7 @@ struct mtk_pcie_port {
> >   struct mtk_pcie {
> >   	struct device *dev;
> >   	void __iomem *base;
> > +	struct regmap *cfg;
> >   	struct clk *free_ck;
> >   
> >   	struct list_head ports;
> > @@ -648,7 +652,7 @@ static int mtk_pcie_setup_irq(struct mtk_pcie_port *port,
> >   		return err;
> >   	}
> >   
> > -	port->irq = platform_get_irq(pdev, port->slot);
> > +	port->irq = platform_get_irq_byname(pdev, "pcie_irq");
> >   	if (port->irq < 0)
> >   		return port->irq;
> 
> You will need to make sure taht the driver keeps working with the old DTS 
> format. This is not the case here.
> 
Thanks for your review, I will fix it in the next version.

Regards,
Chuanjia
> Regards,
> Matthias
> 
> >   
> > @@ -674,12 +678,11 @@ static int mtk_pcie_startup_port_v2(struct mtk_pcie_port *port)
> >   	if (!mem)
> >   		return -EINVAL;
> >   
> > -	/* MT7622 platforms need to enable LTSSM and ASPM from PCIe subsys */
> > -	if (pcie->base) {
> > -		val = readl(pcie->base + PCIE_SYS_CFG_V2);
> > -		val |= PCIE_CSR_LTSSM_EN(port->slot) |
> > -		       PCIE_CSR_ASPM_L1_EN(port->slot);
> > -		writel(val, pcie->base + PCIE_SYS_CFG_V2);
> > +	/* MT7622/MT7629 platforms need to enable LTSSM and ASPM. */
> > +	if (pcie->cfg) {
> > +		val = PCIE_CSR_LTSSM_EN(port->slot) |
> > +		      PCIE_CSR_ASPM_L1_EN(port->slot);
> > +		regmap_update_bits(pcie->cfg, PCIE_SYS_CFG_V2, val, val);
> >   	}
> >   
> >   	/* Assert all reset signals */
> > @@ -983,6 +986,7 @@ static int mtk_pcie_subsys_powerup(struct mtk_pcie *pcie)
> >   	struct device *dev = pcie->dev;
> >   	struct platform_device *pdev = to_platform_device(dev);
> >   	struct resource *regs;
> > +	struct device_node *cfg_node;
> >   	int err;
> >   
> >   	/* get shared registers, which are optional */
> > @@ -995,6 +999,13 @@ static int mtk_pcie_subsys_powerup(struct mtk_pcie *pcie)
> >   		}
> >   	}
> >   
> > +	cfg_node = of_parse_phandle(dev->of_node, "mediatek,pcie-cfg", 0);
> > +	if (cfg_node) {
> > +		pcie->cfg = syscon_node_to_regmap(cfg_node);
> > +		if (IS_ERR(pcie->cfg))
> > +			return PTR_ERR(pcie->cfg);
> > +	}
> > +
> >   	pcie->free_ck = devm_clk_get(dev, "free_ck");
> >   	if (IS_ERR(pcie->free_ck)) {
> >   		if (PTR_ERR(pcie->free_ck) == -EPROBE_DEFER)
> > 



More information about the Linux-mediatek mailing list