[RESEND PATCH v2 2/2] drm/mediatek: mtk_dpi: Convert to bridge driver
Chun-Kuang Hu
chunkuang.hu at kernel.org
Sat Sep 12 21:27:07 EDT 2020
Hi,
Daniel Vetter <daniel at ffwll.ch> 於 2020年9月10日 週四 下午1:48寫道：
>
> On Thu, Sep 10, 2020 at 06:35:21AM +0800, Chun-Kuang Hu wrote:
> > Hi, Andrzej & Neil:
> >
> > Enric Balletbo i Serra <enric.balletbo at collabora.com> 於 2020年8月26日 週三 下午4:53寫道：
> >
> > >
> > > Convert mtk_dpi to a bridge driver with built-in encoder support for
> > > compatibility with existing component drivers.
> > >
> >
> > This is a DRM-bridge related patch, how do you think about it?
>
> bridge stuff is also maintained in drm-misc, so good to go imo.
>
> For the bigger picture I think it'd be really good if bridges drivers
> would use the of bridge lookup, and not hand roll something with
> component. So 2nd step of converting this over to a proper bridge driver
> would be to replace the component code here too.
OK, so this series is applied to mediatek-drm-next [1].
[1] https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux.git/log/?h=mediatek-drm-next
Regards,
Chun-Kuang.
>
> Cheers, Daniel
>
> >
> > Regards,
> > Chun-Kuang.
> >
> > > Reviewed-by: Chun-Kuang Hu <chunkuang.hu at kernel.org>
> > > Signed-off-by: Enric Balletbo i Serra <enric.balletbo at collabora.com>
> > > ---
> > >
> > > Changes in v2:
> > > - Maintain error message when attach to bridge fails. (Boris)
> > >
> > > drivers/gpu/drm/mediatek/mtk_dpi.c | 71 ++++++++++++++++++------------
> > > 1 file changed, 42 insertions(+), 29 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> > > index f7372dbdac0e..589ef33a1780 100644
> > > --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> > > +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> > > @@ -64,6 +64,7 @@ enum mtk_dpi_out_color_format {
> > > struct mtk_dpi {
> > > struct mtk_ddp_comp ddp_comp;
> > > struct drm_encoder encoder;
> > > + struct drm_bridge bridge;
> > > struct drm_bridge *next_bridge;
> > > void __iomem *regs;
> > > struct device *dev;
> > > @@ -83,9 +84,9 @@ struct mtk_dpi {
> > > int refcount;
> > > };
> > >
> > > -static inline struct mtk_dpi *mtk_dpi_from_encoder(struct drm_encoder *e)
> > > +static inline struct mtk_dpi *bridge_to_dpi(struct drm_bridge *b)
> > > {
> > > - return container_of(e, struct mtk_dpi, encoder);
> > > + return container_of(b, struct mtk_dpi, bridge);
> > > }
> > >
> > > enum mtk_dpi_polarity {
> > > @@ -521,50 +522,53 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
> > > return 0;
> > > }
> > >
> > > -static bool mtk_dpi_encoder_mode_fixup(struct drm_encoder *encoder,
> > > - const struct drm_display_mode *mode,
> > > - struct drm_display_mode *adjusted_mode)
> > > +static void mtk_dpi_encoder_destroy(struct drm_encoder *encoder)
> > > {
> > > - return true;
> > > + drm_encoder_cleanup(encoder);
> > > }
> > >
> > > -static void mtk_dpi_encoder_mode_set(struct drm_encoder *encoder,
> > > - struct drm_display_mode *mode,
> > > - struct drm_display_mode *adjusted_mode)
> > > +static const struct drm_encoder_funcs mtk_dpi_encoder_funcs = {
> > > + .destroy = mtk_dpi_encoder_destroy,
> > > +};
> > > +
> > > +static int mtk_dpi_bridge_attach(struct drm_bridge *bridge,
> > > + enum drm_bridge_attach_flags flags)
> > > {
> > > - struct mtk_dpi *dpi = mtk_dpi_from_encoder(encoder);
> > > + struct mtk_dpi *dpi = bridge_to_dpi(bridge);
> > > +
> > > + return drm_bridge_attach(bridge->encoder, dpi->next_bridge,
> > > + &dpi->bridge, flags);
> > > +}
> > > +
> > > +static void mtk_dpi_bridge_mode_set(struct drm_bridge *bridge,
> > > + const struct drm_display_mode *mode,
> > > + const struct drm_display_mode *adjusted_mode)
> > > +{
> > > + struct mtk_dpi *dpi = bridge_to_dpi(bridge);
> > >
> > > drm_mode_copy(&dpi->mode, adjusted_mode);
> > > }
> > >
> > > -static void mtk_dpi_encoder_disable(struct drm_encoder *encoder)
> > > +static void mtk_dpi_bridge_disable(struct drm_bridge *bridge)
> > > {
> > > - struct mtk_dpi *dpi = mtk_dpi_from_encoder(encoder);
> > > + struct mtk_dpi *dpi = bridge_to_dpi(bridge);
> > >
> > > mtk_dpi_power_off(dpi);
> > > }
> > >
> > > -static void mtk_dpi_encoder_enable(struct drm_encoder *encoder)
> > > +static void mtk_dpi_bridge_enable(struct drm_bridge *bridge)
> > > {
> > > - struct mtk_dpi *dpi = mtk_dpi_from_encoder(encoder);
> > > + struct mtk_dpi *dpi = bridge_to_dpi(bridge);
> > >
> > > mtk_dpi_power_on(dpi);
> > > mtk_dpi_set_display_mode(dpi, &dpi->mode);
> > > }
> > >
> > > -static int mtk_dpi_atomic_check(struct drm_encoder *encoder,
> > > - struct drm_crtc_state *crtc_state,
> > > - struct drm_connector_state *conn_state)
> > > -{
> > > - return 0;
> > > -}
> > > -
> > > -static const struct drm_encoder_helper_funcs mtk_dpi_encoder_helper_funcs = {
> > > - .mode_fixup = mtk_dpi_encoder_mode_fixup,
> > > - .mode_set = mtk_dpi_encoder_mode_set,
> > > - .disable = mtk_dpi_encoder_disable,
> > > - .enable = mtk_dpi_encoder_enable,
> > > - .atomic_check = mtk_dpi_atomic_check,
> > > +static const struct drm_bridge_funcs mtk_dpi_bridge_funcs = {
> > > + .attach = mtk_dpi_bridge_attach,
> > > + .mode_set = mtk_dpi_bridge_mode_set,
> > > + .disable = mtk_dpi_bridge_disable,
> > > + .enable = mtk_dpi_bridge_enable,
> > > };
> > >
> > > static void mtk_dpi_start(struct mtk_ddp_comp *comp)
> > > @@ -605,12 +609,11 @@ static int mtk_dpi_bind(struct device *dev, struct device *master, void *data)
> > > dev_err(dev, "Failed to initialize decoder: %d\n", ret);
> > > goto err_unregister;
> > > }
> > > - drm_encoder_helper_add(&dpi->encoder, &mtk_dpi_encoder_helper_funcs);
> > >
> > > /* Currently DPI0 is fixed to be driven by OVL1 */
> > > dpi->encoder.possible_crtcs = BIT(1);
> > >
> > > - ret = drm_bridge_attach(&dpi->encoder, dpi->next_bridge, NULL, 0);
> > > + ret = drm_bridge_attach(&dpi->encoder, &dpi->bridge, NULL, 0);
> > > if (ret) {
> > > dev_err(dev, "Failed to attach bridge: %d\n", ret);
> > > goto err_cleanup;
> > > @@ -791,8 +794,15 @@ static int mtk_dpi_probe(struct platform_device *pdev)
> > >
> > > platform_set_drvdata(pdev, dpi);
> > >
> > > + dpi->bridge.funcs = &mtk_dpi_bridge_funcs;
> > > + dpi->bridge.of_node = dev->of_node;
> > > + dpi->bridge.type = DRM_MODE_CONNECTOR_DPI;
> > > +
> > > + drm_bridge_add(&dpi->bridge);
> > > +
> > > ret = component_add(dev, &mtk_dpi_component_ops);
> > > if (ret) {
> > > + drm_bridge_remove(&dpi->bridge);
> > > dev_err(dev, "Failed to add component: %d\n", ret);
> > > return ret;
> > > }
> > > @@ -802,7 +812,10 @@ static int mtk_dpi_probe(struct platform_device *pdev)
> > >
> > > static int mtk_dpi_remove(struct platform_device *pdev)
> > > {
> > > + struct mtk_dpi *dpi = platform_get_drvdata(pdev);
> > > +
> > > component_del(&pdev->dev, &mtk_dpi_component_ops);
> > > + drm_bridge_remove(&dpi->bridge);
> > >
> > > return 0;
> > > }
> > > --
> > > 2.28.0
> > >
>
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> http://blog.ffwll.ch
More information about the Linux-mediatek
mailing list