[PATCH v2 01/15] dt-bindings: gpio: convert bindings for NXP PCA953x family to dtschema
Krzysztof Kozlowski
krzk at kernel.org
Thu Sep 10 13:57:19 EDT 2020
Convert the NXP PCA953x family of GPIO expanders bindings to device tree
schema.
Signed-off-by: Krzysztof Kozlowski <krzk at kernel.org>
---
Changes since v1:
1. Use additionalProperties.
2. Add wakeup-source.
3. Add hogs.
4. Extend example with hogs.
---
.../devicetree/bindings/gpio/gpio-pca953x.txt | 90 ----------
.../bindings/gpio/gpio-pca95xx.yaml | 166 ++++++++++++++++++
.../devicetree/bindings/trivial-devices.yaml | 4 -
3 files changed, 166 insertions(+), 94 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-pca953x.txt
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt b/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt
deleted file mode 100644
index 3126c3817e2a..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt
+++ /dev/null
@@ -1,90 +0,0 @@
-* NXP PCA953x I2C GPIO multiplexer
-
-Required properties:
- - compatible: Has to contain one of the following:
- nxp,pca6416
- nxp,pca9505
- nxp,pca9534
- nxp,pca9535
- nxp,pca9536
- nxp,pca9537
- nxp,pca9538
- nxp,pca9539
- nxp,pca9554
- nxp,pca9555
- nxp,pca9556
- nxp,pca9557
- nxp,pca9574
- nxp,pca9575
- nxp,pca9698
- nxp,pcal6416
- nxp,pcal6524
- nxp,pcal9535
- nxp,pcal9555a
- maxim,max7310
- maxim,max7312
- maxim,max7313
- maxim,max7315
- ti,pca6107
- ti,pca9536
- ti,tca6408
- ti,tca6416
- ti,tca6424
- ti,tca9539
- ti,tca9554
- onnn,cat9554
- onnn,pca9654
- exar,xra1202
- - gpio-controller: if used as gpio expander.
- - #gpio-cells: if used as gpio expander.
- - interrupt-controller: if to be used as interrupt expander.
- - #interrupt-cells: if to be used as interrupt expander.
-
-Optional properties:
- - interrupts: interrupt specifier for the device's interrupt output.
- - reset-gpios: GPIO specification for the RESET input. This is an
- active low signal to the PCA953x.
- - vcc-supply: power supply regulator.
-
-Example:
-
-
- gpio at 20 {
- compatible = "nxp,pca9505";
- reg = <0x20>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pca9505>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-parent = <&gpio3>;
- interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
- };
-
-
-Example with Interrupts:
-
-
- gpio99: gpio at 22 {
- compatible = "nxp,pcal6524";
- reg = <0x22>;
- interrupt-parent = <&gpio6>;
- interrupts = <1 IRQ_TYPE_EDGE_FALLING>; /* gpio6_161 */
- interrupt-controller;
- #interrupt-cells = <2>;
- vcc-supply = <&vdds_1v8_main>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-line-names =
- "hdmi-ct-hpd", "hdmi.ls-oe", "p02", "p03", "vibra", "fault2", "p06", "p07",
- "en-usb", "en-host1", "en-host2", "chg-int", "p14", "p15", "mic-int", "en-modem",
- "shdn-hs-amp", "chg-status+red", "green", "blue", "en-esata", "fault1", "p26", "p27";
- };
-
- ts3a227 at 3b {
- compatible = "ti,ts3a227e";
- reg = <0x3b>;
- interrupt-parent = <&gpio99>;
- interrupts = <14 IRQ_TYPE_EDGE_RISING>;
- ti,micbias = <0>; /* 2.1V */
- };
-
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml b/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml
new file mode 100644
index 000000000000..7ff6efadf797
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml
@@ -0,0 +1,166 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-pca95xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PCA95xx I2C GPIO multiplexer
+
+maintainers:
+ - Krzysztof Kozlowski <krzk at kernel.org>
+
+properties:
+ compatible:
+ enum:
+ - exar,xra1202
+ - maxim,max7310
+ - maxim,max7312
+ - maxim,max7313
+ - maxim,max7315
+ - nxp,pca6416
+ - nxp,pca9505
+ - nxp,pca9534
+ - nxp,pca9535
+ - nxp,pca9536
+ - nxp,pca9537
+ - nxp,pca9538
+ - nxp,pca9539
+ - nxp,pca9554
+ - nxp,pca9555
+ - nxp,pca9556
+ - nxp,pca9557
+ - nxp,pca9574
+ - nxp,pca9575
+ - nxp,pca9698
+ - nxp,pcal6416
+ - nxp,pcal6524
+ - nxp,pcal9535
+ - nxp,pcal9555a
+ - onnn,cat9554
+ - onnn,pca9654
+ - ti,pca6107
+ - ti,pca9536
+ - ti,tca6408
+ - ti,tca6416
+ - ti,tca6424
+ - ti,tca9539
+ - ti,tca9554
+
+ reg:
+ maxItems: 1
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ gpio-line-names:
+ minItems: 1
+ maxItems: 32
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+
+ reset-gpios:
+ description:
+ GPIO specification for the RESET input. This is an active low signal to
+ the PCA953x.
+
+ vcc-supply:
+ description:
+ Optional power supply
+
+ wakeup-source:
+ $ref: /schemas/types.yaml#/definitions/flag
+
+patternProperties:
+ "^(hog-[0-9]+|.+-hog(-[0-9]+)?)$":
+ type: object
+ properties:
+ gpio-hog: true
+ gpios: true
+ input: true
+ output-high: true
+ output-low: true
+ line-name: true
+
+ required:
+ - gpio-hog
+ - gpios
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - gpio-controller
+ - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio at 20 {
+ compatible = "nxp,pca9505";
+ reg = <0x20>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pca9505>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+
+ usb3-sata-sel-hog {
+ gpio-hog;
+ gpios = <4 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "usb3_sata_sel";
+ };
+ };
+ };
+
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio99: gpio at 22 {
+ compatible = "nxp,pcal6524";
+ reg = <0x22>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>; /* gpio6_161 */
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ vcc-supply = <&vdds_1v8_main>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "hdmi-ct-hpd", "hdmi.ls-oe", "p02", "p03",
+ "vibra", "fault2", "p06", "p07", "en-usb",
+ "en-host1", "en-host2", "chg-int", "p14", "p15",
+ "mic-int", "en-modem", "shdn-hs-amp",
+ "chg-status+red", "green", "blue", "en-esata",
+ "fault1", "p26", "p27";
+ };
+
+ ts3a227 at 3b {
+ compatible = "ti,ts3a227e";
+ reg = <0x3b>;
+ interrupt-parent = <&gpio99>;
+ interrupts = <14 IRQ_TYPE_EDGE_RISING>;
+ ti,micbias = <0>; /* 2.1V */
+ };
+ };
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index 25cfcc904240..442a1f537651 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -322,10 +322,6 @@ properties:
- nuvoton,npct601
# Nuvoton Temperature Sensor
- nuvoton,w83773g
- # Octal SMBus and I2C registered interface
- - nxp,pca9556
- # 8-bit I2C-bus and SMBus I/O port with reset
- - nxp,pca9557
# OKI ML86V7667 video decoder
- oki,ml86v7667
# OV5642: Color CMOS QSXGA (5-megapixel) Image Sensor with OmniBSI and Embedded TrueFocus
--
2.17.1
More information about the Linux-mediatek
mailing list