[PATCH v4 1/2] cpufreq: mediatek-hw: Add support for Mediatek cpufreq HW driver

Hector Yuan hector.yuan at mediatek.com
Tue Sep 8 07:10:25 EDT 2020


On Tue, 2020-09-08 at 15:57 +0530, Viresh Kumar wrote:
> On 08-09-20, 15:35, Hector Yuan wrote:
> > From: "Hector.Yuan" <hector.yuan at mediatek.com>
> > 
> > Add MT6779 cpufreq HW support.
> > 
> > Signed-off-by: Hector.Yuan <hector.yuan at mediatek.com>
> > ---
> >  drivers/cpufreq/Kconfig.arm           |   12 ++
> >  drivers/cpufreq/Makefile              |    1 +
> >  drivers/cpufreq/mediatek-cpufreq-hw.c |  294 +++++++++++++++++++++++++++++++++
> >  3 files changed, 307 insertions(+)
> >  create mode 100644 drivers/cpufreq/mediatek-cpufreq-hw.c
> > 
> > diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
> > index c6cbfc8..8e58c12 100644
> > --- a/drivers/cpufreq/Kconfig.arm
> > +++ b/drivers/cpufreq/Kconfig.arm
> > @@ -121,6 +121,18 @@ config ARM_MEDIATEK_CPUFREQ
> >  	help
> >  	  This adds the CPUFreq driver support for MediaTek SoCs.
> >  
> > +config ARM_MEDIATEK_CPUFREQ_HW
> > +	tristate "MediaTek CPUFreq HW driver"
> > +	depends on ARCH_MEDIATEK || COMPILE_TEST
> > +	default m
> > +	help
> > +	  Support for the CPUFreq HW driver.
> > +	  Some MediaTek chipsets have a HW engine to offload the steps
> > +	  necessary for changing the frequency of the CPUs. Firmware loaded
> > +	  in this engine exposes a programming interface to the OS.
> > +	  The driver implements the cpufreq interface for this HW engine.
> > +	  Say Y if you want to support CPUFreq HW.
> > +
> >  config ARM_OMAP2PLUS_CPUFREQ
> >  	bool "TI OMAP2+"
> >  	depends on ARCH_OMAP2PLUS
> > diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
> > index f6670c4..dc1f371 100644
> > --- a/drivers/cpufreq/Makefile
> > +++ b/drivers/cpufreq/Makefile
> > @@ -57,6 +57,7 @@ obj-$(CONFIG_ARM_IMX6Q_CPUFREQ)		+= imx6q-cpufreq.o
> >  obj-$(CONFIG_ARM_IMX_CPUFREQ_DT)	+= imx-cpufreq-dt.o
> >  obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ)	+= kirkwood-cpufreq.o
> >  obj-$(CONFIG_ARM_MEDIATEK_CPUFREQ)	+= mediatek-cpufreq.o
> > +obj-$(CONFIG_ARM_MEDIATEK_CPUFREQ_HW)	+= mediatek-cpufreq-hw.o
> >  obj-$(CONFIG_MACH_MVEBU_V7)		+= mvebu-cpufreq.o
> >  obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ)	+= omap-cpufreq.o
> >  obj-$(CONFIG_ARM_PXA2xx_CPUFREQ)	+= pxa2xx-cpufreq.o
> > diff --git a/drivers/cpufreq/mediatek-cpufreq-hw.c b/drivers/cpufreq/mediatek-cpufreq-hw.c
> > new file mode 100644
> > index 0000000..61040b8
> > --- /dev/null
> > +++ b/drivers/cpufreq/mediatek-cpufreq-hw.c
> > @@ -0,0 +1,294 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (c) 2020 MediaTek Inc.
> > + */
> > +
> > +#include <linux/bitfield.h>
> > +#include <linux/cpufreq.h>
> > +#include <linux/init.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/of_address.h>
> > +#include <linux/of_platform.h>
> > +#include <linux/slab.h>
> > +
> > +#define LUT_MAX_ENTRIES			32U
> > +#define LUT_FREQ			GENMASK(11, 0)
> > +#define LUT_ROW_SIZE			0x4
> > +
> > +enum {
> > +	REG_LUT_TABLE,
> > +	REG_ENABLE,
> > +	REG_PERF_STATE,
> > +
> > +	REG_ARRAY_SIZE,
> > +};
> > +
> > +struct cpufreq_mtk {
> > +	struct cpufreq_frequency_table *table;
> > +	void __iomem *reg_bases[REG_ARRAY_SIZE];
> > +	cpumask_t related_cpus;
> > +};
> > +
> > +static const u16 cpufreq_mtk_offsets[REG_ARRAY_SIZE] = {
> > +	[REG_LUT_TABLE]		= 0x0,
> > +	[REG_ENABLE]	= 0x84,
> > +	[REG_PERF_STATE]	= 0x88,
> > +};
> > +
> > +static struct cpufreq_mtk *mtk_freq_domain_map[NR_CPUS];
> > +
> > +static int mtk_cpufreq_hw_target_index(struct cpufreq_policy *policy,
> > +				       unsigned int index)
> > +{
> > +	struct cpufreq_mtk *c = policy->driver_data;
> > +
> > +	writel_relaxed(index, c->reg_bases[REG_PERF_STATE]);
> > +	arch_set_freq_scale(policy->related_cpus,
> > +			    policy->freq_table[index].frequency,
> > +			    policy->cpuinfo.max_freq);
> > +
> > +	return 0;
> > +}
> > +
> > +static unsigned int mtk_cpufreq_hw_get(unsigned int cpu)
> > +{
> > +	struct cpufreq_mtk *c;
> > +	struct cpufreq_policy *policy;
> > +	unsigned int index;
> > +
> > +	policy = cpufreq_cpu_get_raw(cpu);
> > +	if (!policy)
> > +		return 0;
> > +
> > +	c = policy->driver_data;
> > +
> > +	index = readl_relaxed(c->reg_bases[REG_PERF_STATE]);
> > +	index = min(index, LUT_MAX_ENTRIES - 1);
> > +
> > +	return policy->freq_table[index].frequency;
> > +}
> > +
> > +static int mtk_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
> > +{
> > +	struct cpufreq_mtk *c;
> > +	struct device *cpu_dev;
> > +
> > +	cpu_dev = get_cpu_device(policy->cpu);
> > +	if (!cpu_dev) {
> > +		pr_err("%s: failed to get cpu%d device\n", __func__,
> > +		       policy->cpu);
> > +		return -ENODEV;
> > +	}
> > +
> > +	c = mtk_freq_domain_map[policy->cpu];
> > +	if (!c) {
> > +		pr_err("No scaling support for CPU%d\n", policy->cpu);
> > +		return -ENODEV;
> > +	}
> > +
> > +	cpumask_copy(policy->cpus, &c->related_cpus);
> > +
> > +	policy->freq_table = c->table;
> > +	policy->driver_data = c;
> > +
> > +	/* HW should be in enabled state to proceed now */
> > +	writel_relaxed(0x1, c->reg_bases[REG_ENABLE]);
> > +
> > +	return 0;
> > +}
> > +
> > +static struct freq_attr *mtk_cpufreq_hw_attr[] = {
> > +	&cpufreq_freq_attr_scaling_available_freqs,
> > +	NULL
> > +};
> > +
> > +static struct cpufreq_driver cpufreq_mtk_hw_driver = {
> > +	.flags		= CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK |
> > +			  CPUFREQ_HAVE_GOVERNOR_PER_POLICY,
> > +	.verify		= cpufreq_generic_frequency_table_verify,
> > +	.target_index	= mtk_cpufreq_hw_target_index,
> > +	.get		= mtk_cpufreq_hw_get,
> > +	.init		= mtk_cpufreq_hw_cpu_init,
> > +	.name		= "mtk-cpufreq-hw",
> > +	.attr		= mtk_cpufreq_hw_attr,
> 
> You can use cpufreq_generic_attr instead.
> 
OK, will replace it with cpufreq_generic_attr.
> > +};
> > +
> > +static int mtk_cpufreq_hw_opp_create(struct platform_device *pdev,
> > +				     struct cpufreq_mtk *c)
> > +{
> > +	struct device *dev = &pdev->dev;
> > +	void __iomem *base_table;
> > +	u32 data, i, freq, prev_freq = 0;
> > +
> > +	c->table = devm_kcalloc(dev, LUT_MAX_ENTRIES + 1,
> > +				sizeof(*c->table), GFP_KERNEL);
> > +	if (!c->table)
> > +		return -ENOMEM;
> > +
> > +	base_table = c->reg_bases[REG_LUT_TABLE];
> > +
> > +	for (i = 0; i < LUT_MAX_ENTRIES; i++) {
> > +		data = readl_relaxed(base_table + (i * LUT_ROW_SIZE));
> > +		freq = FIELD_GET(LUT_FREQ, data) * 1000;
> > +
> > +		if (freq == prev_freq)
> > +			break;
> > +
> > +		c->table[i].frequency = freq;
> > +
> > +		dev_dbg(dev, "index=%d freq=%d\n",
> > +			i, c->table[i].frequency);
> > +
> > +		prev_freq = freq;
> > +	}
> > +
> > +	c->table[i].frequency = CPUFREQ_TABLE_END;
> > +
> > +	return 0;
> > +}
> > +
> > +static int mtk_get_related_cpus(int index, struct cpumask *m)
> > +{
> > +	struct device_node *cpu_np;
> > +	struct of_phandle_args args;
> > +	int cpu, ret;
> > +
> > +	for_each_possible_cpu(cpu) {
> > +		cpu_np = of_cpu_device_node_get(cpu);
> > +		if (!cpu_np)
> > +			continue;
> > +
> > +		ret = of_parse_phandle_with_args(cpu_np, "mtk-freq-domain",
> > +						 "#freq-domain-cells", 0,
> > +						 &args);
> > +		of_node_put(cpu_np);
> > +		if (ret < 0)
> > +			continue;
> > +
> > +		if (index == args.args[0])
> > +			cpumask_set_cpu(cpu, m);
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static int mtk_cpu_resources_init(struct platform_device *pdev,
> > +				  unsigned int cpu, int index)
> > +{
> > +	struct cpufreq_mtk *c;
> > +	struct resource *res;
> > +	struct device *dev = &pdev->dev;
> > +	const u16 *offsets;
> > +	int ret, i, cpu_r;
> > +	void __iomem *base;
> > +
> > +	if (mtk_freq_domain_map[cpu])
> > +		return 0;
> > +
> > +	c = devm_kzalloc(dev, sizeof(*c), GFP_KERNEL);
> > +	if (!c)
> > +		return -ENOMEM;
> > +
> > +	offsets = of_device_get_match_data(&pdev->dev);
> > +	if (!offsets)
> > +		return -EINVAL;
> 
> Just do this once in probe and pass it to this routine. You don't need
> to do this again and again.
> 
OK, I will do it in probe, and pass offsets to this routine.
> > +
> > +	res = platform_get_resource(pdev, IORESOURCE_MEM, index);
> > +	base = devm_ioremap_resource(dev, res);
> > +	if (IS_ERR(base))
> > +		return PTR_ERR(base);
> > +
> > +	for (i = REG_LUT_TABLE; i < REG_ARRAY_SIZE; i++)
> > +		c->reg_bases[i] = base + offsets[i];
> > +
> > +	ret = mtk_get_related_cpus(index, &c->related_cpus);
> > +	if (ret) {
> > +		dev_err(dev, "Domain-%d failed to get related CPUs\n", index);
> > +		return ret;
> > +	}
> > +
> > +	ret = mtk_cpufreq_hw_opp_create(pdev, c);
> 
> This isn't creating an OPP table anymore but just a frequency table.
> Name it mtk_cpu_create_freq_table() rather.
> 
OK, I will rename this function.
> > +	if (ret) {
> > +		dev_err(dev, "Domain-%d failed to create OPP\n", index);
> > +		return ret;
> > +	}
> > +
> > +	for_each_cpu(cpu_r, &c->related_cpus)
> > +		mtk_freq_domain_map[cpu_r] = c;
> > +
> > +	return 0;
> > +}
> > +
> > +static int mtk_resources_init(struct platform_device *pdev)
> > +{
> > +	struct device_node *cpu_np;
> > +	struct of_phandle_args args;
> > +	unsigned int cpu;
> > +	int ret;
> > +
> > +	for_each_possible_cpu(cpu) {
> > +		cpu_np = of_cpu_device_node_get(cpu);
> > +		if (!cpu_np) {
> > +			dev_dbg(&pdev->dev, "Failed to get cpu %d device\n",
> > +				cpu);
> > +			continue;
> > +		}
> > +
> > +		ret = of_parse_phandle_with_args(cpu_np, "mtk-freq-domain",
> > +						 "#freq-domain-cells", 0, &args);
> > +		if (ret < 0)
> > +			return ret;
> > +
> > +		ret = mtk_cpu_resources_init(pdev, cpu, args.args[0]);
> > +		if (ret)
> > +			return ret;
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static int mtk_cpufreq_hw_driver_probe(struct platform_device *pdev)
> > +{
> > +	int ret;
> > +
> > +	/* Get the bases of cpufreq for domains */
> > +	ret = mtk_resources_init(pdev);
> 
> Just open-code this here. No need of a separate routine really, there
> is not much there.
> 
OK, I will make it as open-code.
> > +	if (ret) {
> > +		dev_err(&pdev->dev, "CPUFreq resource init failed\n");
> > +		return ret;
> > +	}
> > +
> > +	ret = cpufreq_register_driver(&cpufreq_mtk_hw_driver);
> > +	if (ret) {
> > +		dev_err(&pdev->dev, "CPUFreq HW driver failed to register\n");
> > +		return ret;
> > +	}
> > +
> > +	dev_dbg(&pdev->dev, "Mediatek CPUFreq HW driver initialized\n");
> 
> Just drop this, this isn't really required. The cpufreq core also
> print some messages for this.
> 
OK.
> > +	of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
> 
> Why do you need to do this ? This should happen automatically.
> 
OK, will remove this.
> > +
> > +	return 0;
> > +}
> > +
> > +static const struct of_device_id mtk_cpufreq_hw_match[] = {
> > +	{ .compatible = "mediatek,cpufreq-hw", .data = &cpufreq_mtk_offsets },
> > +	{}
> > +};
> > +
> > +static struct platform_driver mtk_cpufreq_hw_driver = {
> > +	.probe = mtk_cpufreq_hw_driver_probe,
> > +	.driver = {
> > +		.name = "mtk-cpufreq-hw",
> > +		.of_match_table = mtk_cpufreq_hw_match,
> > +	},
> > +};
> > +
> > +static int __init mtk_cpufreq_hw_init(void)
> > +{
> > +	return platform_driver_register(&mtk_cpufreq_hw_driver);
> > +}
> > +subsys_initcall(mtk_cpufreq_hw_init);
> 
> subsys_init ? Why this ?
> 
OK, I will make it module init.
> You made your driver as a "tristate" driver, and you don't have any
> exit/remove level stuff ?
> 
OK, I will define the corresponding exit function. 
> > +
> > +MODULE_DESCRIPTION("mtk CPUFREQ HW Driver");
> > +MODULE_LICENSE("GPL v2");
> > -- 
> > 1.7.9.5
> 



More information about the Linux-mediatek mailing list