[PATCH v3 2/3] iommu/mediatek: add flag for legacy ivrp paddr
Fabien Parent
fparent at baylibre.com
Sun Sep 6 11:19:27 EDT 2020
Add a new flag in order to select which IVRP_PADDR format is used
by an SoC.
Signed-off-by: Fabien Parent <fparent at baylibre.com>
---
v3: set LEGACY_IVRP_PADDR as a flag instead of platform data
v2: new patch
---
drivers/iommu/mtk_iommu.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 785b228d39a6..b1f85a7e9346 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -116,6 +116,7 @@
#define OUT_ORDER_WR_EN BIT(4)
#define HAS_SUB_COMM BIT(5)
#define WR_THROT_EN BIT(6)
+#define HAS_LEGACY_IVRP_PADDR BIT(7)
#define MTK_IOMMU_HAS_FLAG(pdata, _x) \
((((pdata)->flags) & (_x)) == (_x))
@@ -582,7 +583,7 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
F_INT_PRETETCH_TRANSATION_FIFO_FAULT;
writel_relaxed(regval, data->base + REG_MMU_INT_MAIN_CONTROL);
- if (data->plat_data->m4u_plat == M4U_MT8173)
+ if (MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_LEGACY_IVRP_PADDR))
regval = (data->protect_base >> 1) | (data->enable_4GB << 31);
else
regval = lower_32_bits(data->protect_base) |
@@ -818,7 +819,8 @@ static const struct mtk_iommu_plat_data mt6779_data = {
static const struct mtk_iommu_plat_data mt8173_data = {
.m4u_plat = M4U_MT8173,
- .flags = HAS_4GB_MODE | HAS_BCLK | RESET_AXI,
+ .flags = HAS_4GB_MODE | HAS_BCLK | RESET_AXI |
+ HAS_LEGACY_IVRP_PADDR,
.inv_sel_reg = REG_MMU_INV_SEL_GEN1,
.larbid_remap = {{0}, {1}, {2}, {3}, {4}, {5}}, /* Linear mapping. */
};
--
2.28.0
More information about the Linux-mediatek
mailing list