[PATCH net-next v3 2/6] net: dsa: mt7530: Extend device data ready for adding a new hardware
Jakub Kicinski
kuba at kernel.org
Sat Sep 5 19:47:02 EDT 2020
On Fri, 4 Sep 2020 22:21:57 +0800 Landen Chao wrote:
> +static bool
> +mt7530_phy_mode_supported(struct dsa_switch *ds, int port,
> + const struct phylink_link_state *state)
> {
> struct mt7530_priv *priv = ds->priv;
> - u32 mcr_cur, mcr_new;
>
> switch (port) {
> case 0: /* Internal phy */
> @@ -1363,33 +1364,114 @@ static void mt7530_phylink_mac_config(struct dsa_switch *ds, int port,
> case 3:
> case 4:
> if (state->interface != PHY_INTERFACE_MODE_GMII)
> - return;
> + goto unsupported;
return false;
Jumping to a label which does nothing but returns makes the code less
readable.
> break;
> case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */
> - if (priv->p5_interface == state->interface)
> - break;
> if (!phy_interface_mode_is_rgmii(state->interface) &&
> state->interface != PHY_INTERFACE_MODE_MII &&
> state->interface != PHY_INTERFACE_MODE_GMII)
> - return;
> + goto unsupported;
> + break;
> + case 6: /* 1st cpu port */
> + if (state->interface != PHY_INTERFACE_MODE_RGMII &&
> + state->interface != PHY_INTERFACE_MODE_TRGMII)
> + goto unsupported;
> + break;
> + default:
> + dev_err(priv->dev, "%s: unsupported port: %i\n", __func__,
> + port);
> + goto unsupported;
> + }
> +
> + return true;
> +
> +unsupported:
> + return false;
> +}
> +static void
> +mt753x_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
> + const struct phylink_link_state *state)
> +{
> + struct mt7530_priv *priv = ds->priv;
> + u32 mcr_cur, mcr_new;
> +
> + if (!mt753x_phy_mode_supported(ds, port, state))
> + goto unsupported;
> +
> + switch (port) {
> + case 0: /* Internal phy */
> + case 1:
> + case 2:
> + case 3:
> + case 4:
case 0 ... 4:
> + if (state->interface != PHY_INTERFACE_MODE_GMII)
> + goto unsupported;
> + break;
> + case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */
> + if (priv->p5_interface == state->interface)
> + break;
> +static void
> +mt753x_phylink_validate(struct dsa_switch *ds, int port,
> + unsigned long *supported,
> + struct phylink_link_state *state)
> +{
> + struct mt7530_priv *priv = ds->priv;
> __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
Please keep the variables longest to shortest (reverse xmas tree).
More information about the Linux-mediatek
mailing list